Ferrous Chloride Anhydrous

Size:

Color:

Product Short Description: Is prepared by addition of iron powder to a solution of hydrochloride acid in methanol.
Product Technical Specification:
Remarks:
Images: Alt

Deflocculant Ceramic Slip Casting

Size:

Color:

Product Short Description: We supply both Neutral & Alkaline sodium silicate absolute transparent quality i.e. water white.
Product Technical Specification:

TESTING PROCEDURE :::
ANLYSIS PROCEDEURE OF SODIUM SILICATE : Take 5gm of sodium dilute it to 250ml in SMF with dist. Water , take 50 ml of the diluted solution add 2-4 drops of  methyl red indicator.  Then titrate it against IN {approx.}  HCL  Light Pink is the end point. Take this reading as “A” ml. To this solution add 5 gm of sodium fluoride dissolve properly add  6-7 drops of methyl red indicator titrate against IN HCL  appearance of slight pink colour is the end point . Take this reading as “B” ml 

 

CALCULATION For Na2O
 

“A”ml  x 3.1 x normality of HCl   = C%

               Wt. Of sample 


For  Sio2
 

“B”ml  x 15.02 x normality of HCl 

           Wt. Of sample X 10 

 

Ratio of sodium silicate 

 

% of SiO         i.e               D%

% of Na2o                          C%

 

Viscosity-  AS PER IS 3944 B4 CUP 

 

DETERMINATION OF IRON (as per Fe)

  • Botanic Potassium Thiocynate ;- dissolve 1.0gm of potassium thiocynate in10ml of water. Add sufficient n-butano to makeup to 100ml. Shake vigorously until the solution is clear.
  • Dilute H2SO4 :- approx.10% 
  • Standard Iron solution : weight 0.702gm of Ferrus Ammonium sulfate. Dissolve in 10ml dilute H2SO4 then make up 1000ml with water. Transfer 10 ml of this solution in 100ml M.Flask and make up 100ml with water. 1ml of this solution is equivalent to 0.01mg of iron 

 

PRCEDURE :

  • Sample Reading: take about 5gm of the sample accurately weighted. Dissolve it in distilled water and make the solution exactly 100ml. Take 10 ml of this solution add 1ml concentrated Nitric acid. Boil the solution and cool. Then transfer it into a nessler cylinder and add 30mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution. Shake for 30 sec and allow the liquid to separate.
  • Blank reading : take 10 ml distilled water. Add 1ml concentrated Nitric acid boil the solution and cool. Then transfer it into a nesseler cylinder and add 30 mg of Ammonium Persulfate and 15 ml of Botanic Potassium Thiocynate solution . Shake for 30 sec. And allow the liquid to separate. Then add Standard Iron Solution until the colour of Butanol Layers in Both Cylinder (Sample & Blank) 
    CALCULATION :

Iron as Fe (%w)  =  0.001 V

                                     W

Where, 

V= Volume in ml of Standard Iron Solution to add in Blank Reading

W= Weight in gm of sample 

 

 

 

 

Remarks:

Sodium Silicate Liquid Neutral, Sodium Silicate Liquid Alkaline & Sodium Silicate Powder Neutral Manufacturer. We also keeping ready stock of these materials...
Sodium Silicate Liquid Neutral

Sodium Silicate Liquid Alkaline
Sodium Silicate Powder Neutral
Sodium Silicate Powder Alkaline
Sodium Silicate Glass Neutral
Sodium Silicate Glass Alkaline
Silica Gel
Sodium Silicate
Activated Carbon
Sodium Metasilicate
Silicate Chemicals

Images: Alt

Sodium Aluminate

Size:

Color:

Product Short Description: Sodium Aluminate is an inorganic chemical that is used as an effective source of aluminium hydroxide for many industrial and technical applications.
Product Technical Specification:
Remarks:
Images: Alt

Alum Liquid 30

Size:

Color:

Product Short Description: Alum is used for phosphate precipitation in water treatment plants under the process chemical precipitation of phosphate. . Alum is required as coagulant for water Treatment
Product Technical Specification:

Aluminium oxide as Al2O3wt.%  ::: 14.5-17.5
Iron oxide as EF2O3wt.%           :::  0.8 max
Insoluble matter wt.%                 :::  0.5 max.
Arsenic as P.P .M                       :::  10 Max.

Remarks:
Images: Alt

Primary cationic Flocculant Sewage Treatment

Size:

Color:

Product Short Description: For waste water treatment unit as an agglomerating agent
Product Technical Specification:
Specifications:
Organic cationic polymers or a mixture of organic / inorganic coagulants with high activity in liquid form.
Analyses of oily water to be treated are as follows:
PH : 7-10
Suspension soild: 650 PPM
Hydrocarbon : 500 PPM
Remarks:
Images: Alt

Defoamer Silicone Based

Size:

Color:

Product Short Description: RXSOL-16-2066-200 is antifoam emulsion and its more concentrated antifoam emulsion. It has excellent candidates for controlling foam in amine and glycol dehydration units. This is suitable products for gas plants and have excellent stability in the presence
Product Technical Specification:

 

Emulsion: Silicone Antifoam Emulsion RXSOL-16-2066-210
Chemical Nature Emulsion of a silicone antifoam compound
Appearance White, homogeneous, slightly viscous liquid

Viscosity at 25°C, cSt
600
Active Ingredients, % 10
Specific Gravity at 25°/25°C 1
pH 7
Emulsion Type Non-ionic
Suitable Diluents Water only
 
Remarks:
Images: Alt

Sodium Thiosulphate Solution

Size:

Color:

Product Short Description: Sodium Thiosulfate used as a water Dechlorinator also used in Pond Aquarium . This product also used as a Photography as a fixing agent hypo to dissolve unchanged silver salts from exposed negatives.
Product Technical Specification:
IUPAC name :Sodium thiosulfate

Other names:Sodium hyposulfite, Hyposulphite of soda

 Identifiers CAS number : 7772-98-7 Y, 10102-17-7 : (pentahydrate)

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Molecular Formula

Na2S2O3.5H2O

Molar Mass

158.11 g/mol

Appearance

Clear Liq

Odor

Odorless

Density

1.667 g/cm3

Melting Point

48.3 °C (pentahydrate)

Boiling Point

100 °C (pentahydrate, - 5H2O decomp)

Solubility in Water

76.4 g/100 g H20(20 °C)

 

IUPAC name :Sodium thiosulfate
Other names:Sodium hyposulfite ,Hyposulphite of soda

 Identifiers

CAS number : 7772-98-7 Y,

10102-17-7 : (pentahydrate)

PubChem: 24477

ChemSpider :22885 Y

UNII :L0IYT1O31N Y

ChEMBL CHEMBL : 1201157 N

RTECS number :XN6476000

Remarks:

Keep away from heat as the potential for release of sulfur dioxide fumes exists. Liquid sodium thiosulfate has very low toxicity but routine safety precautions should be practiced. Rubber gloves, safety goggles and protective clothing is recommended. 

Sodium Thiosulfate, wt%30 +/- 2%
Sulfite, wt%1.5 max.
pH 7.0 – 9.0
Physical Properties: 
Specific Gravity @ 25o C 1.252 – 1.34
Density, lbs/gal @ 25o C 10.4 – 11.2

Images: Alt

BO Electrolyte

Size:

Color:

Product Short Description: An electrolyte is a substance that dissociates in water into charged particles called ions. Positively charged ions are called cations. Negatively charged ions are called anions. Simply, an electrolyte is a substance that can conduct an electric current when melted or dissolved in water.
Product Technical Specification:
Remarks:
Images: Alt

Sewage Acid Clean

Size:

Color:

Product Short Description: Sewage Acid Clean is a popular sewage sludge cleaner and drain cleaner.
Product Technical Specification:


 

 

 

Properties

Appearance

Clear colorless to light-yellow liquid

Melting point

−26°C (247 K)

Boiling point

110 °C (383 K), 20.2% solution;
48°C (321 K), 38% solution.

Solubility in water

Miscible

Acidity (pKa)

−8.0

Viscosity

1.9 mPa s at 25° C,
31.5% solution

Flash point

Non-flammable

Remarks:
Images: Alt

Industrial Salt

Size:

Color:

Product Short Description: Odorless, white color free flowing crystals
Product Technical Specification:

Specification 

Sodium Chloride , NaCl 

odorless, white color free flowing crystals Solution with water will be transparent 

85% between 200 to 600 micron Sodium Chloride 99.6% Min on dry basis 

  • Total calcium salt as Ca by mass Maximum 0.04 % 

  • Total Magnesium salt as Mg by mass Maximum 0.04 % 

  • Total Sulfates as SO4 by mass Maximum 0.1 % 

  • Matter insoluble in water by mass Maximum 0.05 % 

  • Iron compound as Fe Maximum 5 ppm 

  • Non Caking agent Maximum 10 ppm 

  • Alkalinity as Na2CO3 Maximum 500 ppm 

  • Bulk density 1300 Kg/m3

  • Moisture Maximum 0.1 % 

  • pH of 10% solution 7.5 

Remarks:
Images: Alt
stock-clearance.png