RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Metal Treatment

NITRIC ACID 58-62 PCT

NITRIC ACID 58-62%
Part number
RXSOL-68-1542-005
Brand
RXSOL
RXSOL

Overview

Nitric acid 58-62% concentration frequently used in the production of fertilizers and also most commonly used for metal treatment as well as used in various industrial and laboratory applications. NITRIC ACID is a corrosive, oxidizing liquid.

Applications

Nitric Acid 58 ; Purity/Concentration. 58% ; Form. Liquid ; Chemical Formula. HNO3

Dosage and directions

Nitric acid (HNO₃) is a colorless liquid with yellow or red fumes with an acrid odor. Exposure to nitric acid can cause irritation to the eyes, skin, and mucous membrane; it can also cause delayed pulmonary edema, pneumonitis, bronchitis, and dental erosion. Nitric acid is highly corrosive.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Porduct Name               NITRIC ACID 58-62 percent 
Part Number   RXSOL-68-1542-005

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmraine.com
Chemical Name                 Cas No                        EC No              Weight                            Formula                    Percent
 Nitric acid           7697-37-2 231-714-2 63,01 g/mol   HNO3 58-62
Signal Word  Danger
Hazard Statements H272 May intensify fire; oxidizer. H290 May be corrosive to metals. H314 Causes severe skin burns and eye damage. H330 Fatal if inhaled.
Precautionary statements   P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220 Keep away from clothing and other combustible materials. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Supplemental Hazard information (EU) EUH071 Corrosive to the respiratory tract.
Classification of the substance or mixture None
Supplemental Hazard      Statements EUH071 Corrosive to the respiratory tract.
Other hazards  This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
General advice First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance.
If inhaled After inhalation: fresh air. Immediately call in physician. If breathing stops: immediately apply artificial respiration, if necessary also oxygen.
Eye Contact  After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
Swallowed After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise
Skin Contact   In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
Inhalation None 
Ingestion None
Most important symptoms and effects, both acute and delaye The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 
Indication of any immediate medical attention and special treatment needed  No data available
Suitable extinguishing media  Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture  Nature of decomposition products not known. Not combustible. Fire may cause evolution of: nitrogen oxides, nitrous gases Has a fire-promoting effect due to release of oxygen. Ambient fire may liberate hazardous vapours.
Further information Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Hazardous combustion
products
None
Advice for firefighters Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Protective Equipment Use personal protective equipment.
Specific Hazards Arising from the Chemical None
Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8.
Spillage None
Personal Protection None
Enviromental Precaution Do not let product enter drains.
Methods and materials for
containment and cleaning
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up carefully with liquid-absorbent material (e.g. Chemizorb®). Dispose of properly. Clean up affected area
Reference to other sections    For disposal see section 13.
Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.
Incompatible materials  Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. 
Hygiene measures Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.
Advice on safe handling Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Conditions for safe storage, including any incompatibilities  No data available
Storage conditions  No metal or light-weight-metal containers. No metal containers. Protected from light.Tightly closed. Keep locked up or in an area accessible only to qualified or authorized persons. Separately or together with other oxidising substances only and away from sources of ignition and heat.Because of their oxidation potential these products can raise the burning rate of combustible substances substantially or ignite combustible substances on contact with them. Recommended storage temperature see product label.
Storage class Storage class (TRGS 510): 5.1A: Strongly oxidizing hazardous materials 
Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
Advice on general occupational hygiene Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.
Exposure controls   Personal protective equipment
Engineering Control None
Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles
Body Protection Acid-resistant protective clothing
Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: butyl-rubber
Respiratory protection
Recommended Filter type: Filter E-(P3) The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented. Not required; except in case of aerosol formation.
Other Protection  Measure None
Control of    environmental exposure Do not let product enter drains. 
Physical state Liquid
Odour Stinging 
Odor Threshold Not Applicable
pH < 1 at 20 °C
Melting Point -41,59 °C
Flash Point No data available
Evaporation Rate Not Applicable
Flammability (solid, gas) No data available
Explosive limits No Data Available
Upper/lower flammability or explosive limits No data available
Autoignition temperature No data available
Decomposition temperature  No data available
Vapour pressure  10 hPa at 20 °C                                                     
Viscosity  Viscosity, kinematic: No data available Viscosity, dynamic: 0,746 mPa.s at 25 °C
Density 1,9 g/cm3 at 20 °C 
Relative Density No data available
Specific Gravity No data available 
Partition coefficient No data available
Explosive properties No data available 
Solubility 1.000 g/l at 20 °C - soluble, (development of heat)
Ignition temperature No information available.
Particle characteristics No data available 
Boiling Point  (for product) 185.0 F (85.0 C) @ 760 mmHg
Vapor Pressure   (for product) 51.000 mmHg @ 77.00 F
Specific Vapor Density  2.200 @ AIR=1 
Specific Gravity 1.424 @ 77.00 F
Liquid Density  11.850 lbs/gal @ 77.00 F                                            
1.424 kg/l @ 25.00 C
Percent Volatiles 100.0     %    
Evaporation Rate SLOWER THAN ETHYL ETHER
Appearance  No data
State  LIQUID 
Physical Form HOMOGENEOUS SOLUTION
Color  CLEAR,YEL-RED-BRN, ACRID ODOR
Reactivity                        strong oxidising agent
Chemical stability Sensitivity to light The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions Risk of explosion with: Acetone acetonitrile acetylidene Alcohols anilines antimony hydride arsenic hydride organic combustible substances phosphides benzene/benzene derivatives Amines alkenes Halogenated hydrocarbon Ether hydrazine and derivatives Sulfides Dioxane acetic acid Acetic anhydride Flurine
Conditions to avoid May discolor on exposure to air and light. no information available                                                                                     
Incompatible materials
Cellulose, MetalsContact with metals may lead to the formation of nitrous gases and hydrogen.
Hazardous decomposition products In the event of fire: see section 5 
Acute toxicity   Oral: No data available Acute toxicity estimate Inhalation - 4 h - 0,05 mg/l - vapor (Expert judgment) Dermal: No data available                   
Skin corrosion/irritation Skin - Rabbit Result: Causes severe burns. Remarks: (IUCLID) Remarks: Causes poorly healing wounds
Serious eye      damage/irritation Eyes - Rabbit Result: Causes burns. Remarks: (IUCLID) Remarks: Causes serious eye damage.
Respiratory or skin    sensitization  No data available
Carcinogenicity No data available
Germ cell mutagenicity  Test Type: Ames test Test system: Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative
Reproductive toxicity  No data available 
Specific target organ toxicity -single exposure
No data available
Additional Information Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. Liver - Irregularities - Based on Human Evidence
Persistence and degradability The methods for determining the biological degradability are not applicable to inorganic substances.
Toxicity to fish  No data available
Toxicity to daphnia and other aquatic invertebrates No data available
Toxicity No data available
Toxicity to bacteria  No data available
Toxicity to algae No data available
Products Biodegradation No data available
Mobility in soil No data available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Endocrine disrupting       properties Assessment : The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Other adverse effects Biological effects: Harmful effect due to pH shift. Hazard for drinking water supplies. Forms corrosive mixtures with water even if diluted. Discharge into the environment must be avoided. May be harmful to aquatic organisms due to the shift of the pH.
No data available
UN number ADR/RID: 2032                                 IMDG: 2032                        IATA:  2032    
UN proper shipping name  ADR/RID: NITRIC ACID, RED FUMING  IMDG: NITRIC ACID, RED FUMING   IATA: Nitric acid, red fuming Passenger Aircraft: Not permitted for transport Cargo Aircraft: Not permitted for transport 
Transport hazard class(es)      ADR/RID: 8 (5.1, 6.1)                     IMDG: 8 (5.1, 6.1)                         IATA:8 (5.1, 6.1)   
Packaging group ADR/RID:  I                                     IMDG: I                                            IATA:-
Environmental hazards ADR/RID: no                        IMDG Marine pollutant: no                          IATA: no
Special precautions for user Tunnel restriction code : (C/D) Further information : No data available
Further information None
Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Other regulations Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work.
Chemical Safety Assessment A Chemical Safety Assessment has been carried out for this substance.
Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

Request the signed SDS as PDF