HEXENE 1
- Part number
- RXSOL-19-1318-025
- Category
- Solvent Chemicals
- Brand
- RXSOL
Technical specifications
| PRODUCT NAME | : | HEXENE (1-) |
| CAS number | : | 592-41-6 |
| UN number | : | 2370 |
| Formula | : | CH3CH2CH2CH2CH:CH2 |
| Odour | : | |
| Solubility in water | : | INSOLUBLE |
| Density | : | 0.673 at 20 oC |
| Boiling point | : | 63 oC |
| Melting point | : | -139 oC |
| Viscosity | : | |
| Flashpoint | : | -26v |
| Explosive limits | : | 1.2 – 6.9 Vol% |
| Vapour pressure | : | 180 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country | : | |
| Pollution category 1994 | : | (C) |
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | HEXENE 1 |
| Part Number | RXSOL-19-1318-025 |
| Chemical Formula | C6H12 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Sikka, Kandla, Dahej , Hazira, JNPT, Goa, Mngalore, Cochin, Tuticorin,Chennai, Kakinada,Vizag, Paradip, Haldia, Kolkata,Fujairah.
| Phone | +91 22 27815540 / 27815542 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Nameof Substance | Cas Number | EC No | Classification | Molecular weight |
| Hexene-1 | 592-41-6 | 209-753-1 |
Flam. Liq. 2; Asp. Tox. 1; H225, H304 |
84,16 g/mol |
| Signal word Danger | Danger |
| Hazard statement(s) |
H225 Highly flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. |
| Precautionary statement(s) |
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P331 Do NOT induce vomiting. |
| Supplemental Hazard Statements | None |
| Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| General advice | Consult a physician. Show this safety data sheet to the doctor in attendance. |
| Inhalation |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. |
| Skin Contact | Wash off with soap and plenty of water. Consult a physician. |
| Eye Contact | Flush eyes with water as a precaution. |
| Swallowed |
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
|
| Most important symptoms/effects, acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed. Notes to Physician | No data available |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
| Special hazards arising from the substance or mixture | Carbon oxides. |
| Advice for firefighters | Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information | Use water spray to cool unopened containers. |
| Personal precautions, protective equipment and emergency procedures. |
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. For personal protection see section 8. |
| Environmental Precautions | Prevent further leakage or spillage if safe to do so. Do not let product enter drains. |
| Methods and material for containment and cleaning up |
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wetbrushing and place in container for disposal according to local regulations (see section 13).
|
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling |
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities |
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated. |
| Appropriate engineering controls |
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. |
| Personal protective equipment | Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
| Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. |
| Full contact | Material: Nitrile rubber. Minimum layer thickness: 0,4 mm Break through time: 480 min Material tested:Camatril® (KCL 730 / Aldrich Z677442, Size M) |
| Splash contact |
Minimum layer thickness: 0,11 mm Break through time: 30 min If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
| Body Protection | Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
| Respiratory protection | Where risk assessment shows air-purifying respirators are appropriate use a fullface respirator with multi-purpose combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
| Control of environmental exposure | Prevent further leakage or spillage if safe to do so. Do not let product enter drains. |
| Appearance | Liquid |
| Colour | Colourless |
| Odour | No information available |
| Odor Threshold | No information available |
| pH | No information available |
| Melting Point/Freezing Point | -140,0 °C |
| Initial Boiling Point and Boiling Range | 60 - 66 °C - lit. |
| Flash Point | -25,0 °C - closed cup |
| Evaporation Rate | No information available |
| Solid Flammability (solid,gas) | May form combustible dust concentrations in air. |
| Explosion Limits | Lower explosion limit: 1,2 %(V) |
| Vapor Pressure | 413,3 hPa at 37,7 °C 206,6 hPa at 21,1 °C |
| Vapor Density | No information available |
| Relative density | 0,678 g/cm3 at 25 °C |
| Water Solubility | No information available |
| Partition coefficient:n-octanol/water | No information available |
| Auto-ignition temperature | 253,0 °C |
| Decomposition temperature | No information available |
| Viscosity | No information available |
| Explosive properties | No information available |
| Oxidizing properties | No information available |
| Other safety information | No information available |
| Reactivity | No data available |
| Chemical stability | Stable under recommended storage conditions. |
| Possibility of Hazardous Reaction | No data available |
| Conditions to Avoid | Heat, flames and sparks. |
| Incompatible Materials | Acids, Oxidizing agents |
| Hazardous Decomposition Products | Hazardous decomposition products formed under fire conditions. - Carbon oxides. |
| Other decomposition products | No data available. In the event of fire: see section 5 |
| Acute toxicity |
No data available LC50 Inhalation - Rat - 4,0 h - 32000, ppm Remarks: Behavioral:General anesthetic. Behavioral:Somnolence (general depressed activity). Lungs, Thorax, or Respiration:Other changes. |
| Skin corrosion/irritation | No data available |
| Serious eye damage/irritation | No data available |
| Respiratory or skin sensitisation | No data available |
| Germ cell mutagenicity | No data available |
| Carcinogenicity |
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. |
| Reproductive toxicity | No data available |
| STOT-single exposure | No data available |
| STOT-repeated exposure | No data available |
| Aspiration hazard |
May be fatal if swallowed and enters airways. The substance or mixture is known to cause human aspiration toxicity hazards or has to be regarded as if it causes a human aspiration toxicity hazard. |
| Additional Information |
RTECS: MP6670000 burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, May cause cyanosis., To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Central nervous system - |
| Toxicity | No data available |
| Persistence and degradability | No data available |
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available(2-Propenamide, homopolymer) |
| Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Other adverse effects | No data available. |
| Product |
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. |
| Contaminated Packaging | Dispose of as unused product. |
ADR/RID
| UN number | 2370 |
| UN proper shipping name | 1-HEXENE |
| Hazard Class | 3 |
| Packing Group | II |
| Environmental hazards | No |
| Special precautions for user | No data available |
IMDG
| UN number | 2370 |
| UN proper shipping name | 1-HEXENE |
| Hazard Class | 3 |
| Packing Group | II |
| Environmental hazards | No |
| Special precautions for user | No data available |
IATA
| UN number | 2370 |
| UN proper shipping name | 1-HEXENE |
| Hazard Class | 3 |
| Packing Group | II |
| Environmental hazards | No |
| Special precautions for user | No data available |
|
Safety, health and environmental regulations/ |
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Chemical safety assessment | For this product a chemical safety assessment was not carried out. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
HEXENE 1 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of HEXENE 1 at a competitive price from us. We have ready stock of HEXENE 1 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
