|
Product Name |
BROMOXYLENOL BLUE |
|
Part Number |
RXSOL-69-4007-059 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
rxsolchemicals@gmail.com |
|
Website |
www.rxmraine.com |
|
Chemical Name |
CAS |
EC number |
Weight |
Formula |
|
Bromphenol Blue |
115-39-9 |
204-086-2 |
<= 100 % |
C19H10Br4O5S |
|
Signal Word |
None. |
|
Hazard Statements |
H225 Highly flammable liquid and vapor. H302 Harmful if swallowed. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. H331 Toxic if inhaled. H335 May cause respiratory irritation. H350 May cause cancer. |
|
P280 Wear protective gloves.P305 + P351 + P338 |
Wear eye protection/ face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
|
Precautionary statements |
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P311 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
|
Classification of the substance or mixture |
Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Supplemental Hazard Statements |
None. |
|
Other hazards |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
General advice |
None. |
|
If inhaled |
If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
|
Eye Contact |
Flush eyes with water as a precaution. |
|
Swallowed |
Never give anything by mouth to an unconscious person. Rinse mouth with water. |
|
Skin Contact |
Wash off with soap and plenty of water. |
|
Inhalation |
Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. |
|
Ingestion |
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately. |
|
Most important symptoms and effects, both acute and delaye |
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
|
Indication of any immediate medical attention and special treatment needed |
No data available |
|
Flammability |
May be combustible at high temperature. |
|
Flash Point |
Higher than 93.3°C (200°F). |
|
Suitable extinguishing media |
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. |
|
Unsuitable extinguishing media |
For this substance/mixture no limitations of extinguishing agents are given. |
|
Special hazards arising from the substance or mixture |
Carbon oxides Sulfur oxides Hydrogen bromide gas |
|
Further information |
Remove container from danger zone and cool with water. Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
Hazardous combustion
products |
Fire may cause the evolution of Sulphur oxides, nitrogen oxides. |
|
Advice for firefighters |
Wear self-contained breathing apparatus for firefighting if necessary. |
|
Protective Equipment |
Use personal protective equipment. |
|
Specific Hazards Arising from the Chemical |
Has a fire-promoting effect due to the release of oxygen.
Ambient fire may liberate hazardous vapours. |
|
Personal precautions, protective equipment and emergency procedures |
Avoid dust formation. Avoid breathing vapors, mist or gas. For personal protection see section 8. |
|
Spillage |
Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal. |
|
Personal Protection |
Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert. Advice for emergency responders: Protective equipment see section 8. |
|
Enviromental Precaution |
No special environmental precautions required. |
Methods and materials for
containment and cleaning |
Sweep up and shovel. Keep in suitable, closed containers for disposal. |
|
Advice on safe handling |
Provide appropriate exhaust ventilation at places where dust is formed. |
|
Advice on protection against fire and explosion |
Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge. |
|
Incompatible materials |
Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. |
|
Hygiene measures |
General industrial hygiene practice. For precautions see section 2.2. |
|
Storage conditions |
Keep container tightly closed in a dry and well-ventilated place. Store in cool place. |
|
Storage class |
Storage class (TRGS 510): 13: Non Combustible Solids |
|
Specific end use(s) |
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
|
Advice on general occupational hygiene |
Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance. |
|
Requirements for storage |
Keep in cool and store under shade. |
|
Exposure controls |
No specific additional engineering controls are required. Provide good natural or artificial ventilation. |
|
Engineering Control |
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. |
|
Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). |
|
Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Full contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) Splash contact Material: Nitrile rubber Minimum layer thickness: 0,11 mm Break through time: 480 min Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M) data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374 If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the EC approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario. |
|
Body Protection |
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. |
|
Respiratory protection |
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
|
Other Protection Measure |
Handle in accordance with good industrial hygiene and safety practice. |
|
Control of environmental exposure |
No special environmental precautions required. |
|
Thermal hazards |
No data available |
|
Physical state |
Powder |
|
Colour |
Red |
|
Odour |
Phenol-like |
|
Odor Threshold |
Not Applicable |
|
pH |
No data available |
|
Melting Point |
273 °C |
|
Boiling Point |
No data available |
|
Flash Point |
No data available |
|
Evaporation Rate |
Not Applicable |
|
Flammability (solid, gas) |
No data available |
|
Explosive limits |
No Data Available |
|
Upper/lower flammability or explosive limits |
No data available |
|
Autoignition temperature |
No data available |
|
Decomposition temperature |
No data available |
|
Vapour pressure |
No data available |
|
Viscosity /kinematic / dynamic |
No data available |
|
Density |
No data available |
|
Relative Vapour Density |
No data available |
|
Freezing point |
No data available |
|
Specific Gravity |
No data available |
|
Partition coefficient |
log Pow: ca.6,77 |
|
Explosive properties |
No data available |
|
Solubility |
20 °C |
|
Ignition temperature |
No information available. |
|
Particle characteristics |
No data available |
|
Reactivity |
No data available |
|
Stability |
Stable under recommended storage conditions. |
|
Possibility of hazardous reactions |
No data available |
|
Conditions to avoid |
Heat. |
|
Incompatible materials |
Strong oxidizing agents |
|
Hazardous Polymerization |
In the event of fire: see section 5 |
|
Acute toxicity |
Oral: No data available Inhalation: No data available Dermal: No data available |
|
Skin corrosion/irritation |
No data available |
|
Serious eye damage/eye irritation |
No data available |
|
Respiratory or skin sensitization |
Local lymph node assay (LLNA) - Mouse Result: negative (OECD Test Guideline 429) |
|
Toxicity to Animal |
WARNING: THE LC50 VALUES HEREUNDER ARE ESTIMATED ON THE Acute oral toxicity (LD50): 689 mg/kg [Rat]. |
|
Toxic Effects on Human |
May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer). |
|
Carcinogenicity |
No data available |
|
Germ cell mutagenicity |
Result: Equivocal evidence. Remarks: Histidine reversion (Ames) |
|
Reproductive toxicity |
No data available |
|
Specific target organ toxicity - single exposure |
May cause respiratory irritation. |
|
Special Remarks on other Toxi Effects on Humans |
Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin sensitization, an allergic reation, which becomes evident upon re-exposure to this material. Eyes: Causes eye irritation. Ingestion: Causes gastrointestinal (digestive) tract irritation with nausea, vomiting, and diarrhea. May be harmful if swallowed. Inhalation: Causes respiratory tract irritation. May cause chemical pneumonitis and pulmonary edema, inflammation, edema of bronchi and larynx. Chronic Potential Health Effects: Repeated or prolonged skin exposure may cause allergic reactions in sensitive individuals. Repeated or prolonged exposure by inhalation may affect respiration and metabolism. |
|
Additional Information |
RTECS: SJ7453000 To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. . |
|
Persistence and degradability |
Biodegradability aerobic - Exposure time 20 d Result: > 90 % - Inherently biodegradable. Remarks: (ECHA) |
|
Bioaccumulative potentia |
Bioaccumulation Lepomis macrochirus - 14 d at 16 °C - 0,957 mg/l(1,2-Dichloroethane) Bioconcentration factor (BCF): 2 |
|
Toxicity to fish |
Flow-through test LC50 - Pimephales promelas (fathead minnow) - 136 mg/l - 96 h (OECD Test Guideline 203) |
|
Toxicity to daphnia and other aquatic invertebrates |
Static test EC50 - Daphnia magna (Water flea) - 160 mg/l - 48 h Remarks: (in soft water) (IUCLID) |
|
Toxicity to algae |
Static test EC50 - Desmodesmus subspicatus (green algae) - 166 mg/l - 72 h (OECD Test Guideline 201) |
|
Toxicity to bacteria |
Static test EC50 - activated sludge - 35.500 mg/l - 3 h (OECD Test Guideline 209) |
|
Mobility in soil |
No Information available |
|
Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
|
Endocrine disrupting properties |
The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
|
Other adverse effects |
No data available |
|
Disposal methods |
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems. |
|
Contaminated packaging |
Dispose of as unused product. |
|
Waste treatment Method |
Offer surplus and non-recyclable solutions to a licensed disposal company. |
|
UN number |
ADR/RID: IMDG: IATA: |
|
UN proper shipping name |
ADR/RID: IMDG: IATA: |
|
Transport hazard class(es) |
ADR/RID: IMDG: IATA: |
|
Packaging group |
ADR/RID: IMDG: IATA: |
|
Environmental hazards |
ADR/RID: No IMDG: No IATA: No |
|
Special precautions for user |
Tunnel restriction code : (C/E) |
|
Further information |
Not classified as dangerous in the meaning of transport regulations. |
|
Transport in bulk according to IMOinstruments |
No data available |
|
Inventory status |
Components are on the following inventories: Polymaleic acid: - US TSCA, Canadian DSL, EU EINECS, Australian AICS, Korean, Philippine PICCS and Chinese Xi irritant R 36/38 Irritant to eyes & skin R 41 Risk of serious damage to eyes S24/25 Avoid contact with skin and eyes S26/28 In case of contact eyes & skin, rinse with plenty water and seek medical advice Section 312/313: Not listed. Not listed under California proposition 65. |
|
Safety, health and environmental regulations/legislation specific for the substance or mixture |
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
|
National legislation |
Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. : ACUTE TOXIC : FLAMMABLE LIQUIDS : ACUTE TOXIC : FLAMMABLE LIQUIDS |
|
Other regulations |
Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work. |
|
Chemical Safety Assessment |
For this product a chemical safety assessment was not carried out |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
|
