PHENYL PHOSPHATE DISODIUM SALT AR
- Part number
- RXSOL-60-6605-226
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
PHENYL PHOSPHATE DISODIUM SALT AR Safety Information For Research Use OnlySoluble in water Storage Store at room temperature. Not Intended for Diagnostic or Therapeutic Use.
Applications
Disodium phosphate (DSP), or Disodium hydrogen phosphate, or sodium phosphate dibasic, is the inorganic compound with the formula Na2HPO4. It is one of several sodium phosphates.
Dosage and directions
Monobasic and dibasic sodium phosphate are used as a saline laxative to treat constipation or to clean the bowel before a colonoscopy.
Characteristics and notes
Disodium phosphate (DSP), or Disodium hydrogen phosphate, or sodium phosphate dibasic, is the inorganic compound with the formula Na2HPO4. It is one of several sodium phosphates.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | PHENYL PHOSPHATE DISODIUM SALT AR |
| Part Number | RXSOL-60-6605-226 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai, Chennai, Vizag , Kolkata, UAE, OMAN and KENYA
| Phone | +91 22 2087 1200 - 1400 |
| Fax | +91 22 2087 1500 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Chemical Name | CAS number | EC-No | Weight % |
| PHENYL PHOSPHATE DISODIUM SALT AR | 66778-08-3 | 221-917-4 | 98% |
| Classification of the substance or mixture | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
| Label elements | Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008. |
|
Other hazards |
None |
| HEALTH HAZARDS | Repeated exposure may cause skin dryness or cracking. May be irritating to the eyes, nose, throat, and lungs. |
| Description of first-aid measures If inhaled | If breathed in, move person into fresh air. If not breathing, give artificial respiration. |
| In case of skin contact | Wash off with soap and plenty of water |
| In case of eye contact | Flush eyes with water as a precaution |
| If swallowed | Never give anything by mouth to an unconscious person. Rinse mouth with water |
| Most important symptoms and effects, both acute and delayed | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media | Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide |
| Special hazards arising from the substance or mixture | Carbon oxides Oxides of phosphorus Sodium oxides |
| Advice for firefighters | Wear self-contained breathing apparatus for firefighting if necessary. |
| Further information | No data available |
| Personal precautions, protective equipment and emergency procedures |
Avoid dust formation. Avoid breathing vapors, mist or gas. For personal protection see section 8.
|
| Environmental precautions |
Do not let product enter drains.
|
| Methods and materials for containment and cleaning up |
For disposal see section 13.
|
| Advice on protection against fire and explosion |
Provide appropriate exhaust ventilation at places where dust is formed.
|
| Hygiene measures | General industrial hygiene practice. For precautions see section 2.2. |
| Storage conditions | Store in cool place. Keep container tightly closed in a dry and well-ventilated place. |
| Storage stabilit | Recommended storage temperature 2 - 8 °C Hygroscopic |
| Storage class | Storage class (TRGS 510): 13: Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Eye/face protection |
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
|
| Skin protection |
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
|
| Body Protection |
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace
|
| Respiratory protection | Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). |
| Control of environmental exposure |
Do not let product enter drains.
|
| Environmental contols |
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
|
Gloves Suit
| Physical State | powder |
| Colour | white |
| Odour | No data available |
| Melting point/freezing point | No data availabl |
| Initial boiling point and boiling range | No data availabl |
| Flammability (solid, gas) | No data available |
| Flash Point | 61 °C (142F) - 66 °C (151F) |
| Density (at 15 ºC) | 776 kg/m³ (6.48 lbs/gal, 0.78 kg/dm³) |
| Evaporation Rate | 0.7 |
| pH | No data available |
| Flammability (Solid, Gas): | No data available |
| Log Pow (n-Octanol/Water Partition Coefficient): | No data available |
| Vapour Density | No data available |
| Autoignition Temperature | No data available |
| Solubility in Water | No data available |
| Kintic viscosit | No data available |
| Vapor Pressure | No data available |
| Molecular Weight |
No data available
|
| Oxidizing Properties | No data available |
| Freezing Point | No data available |
| Melting Point | No data available |
| Hygroscopic | No data available |
| Evaporation Rate (n-butyl acetate = 1) | No data available |
| Log Pow (n-Octanol/Water Partition Coefficient) | No data available |
| Viscosity | Viscosity, kinematic: No data available Viscosity, dynamic: No data available |
| Freezing Point | No data available |
| Reactivity | No data available |
| Chemical stability | Stable under recommended storage conditions. |
| Possibility of hazardous reactions | No data availablE |
| Conditions to avoid | Avoid moisture. |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Cute toxicity | Cute toxicity |
| Conditions to avoid | Avoid moisture |
| Serious eye damage/eye irritation | No data available |
| Skin | No data available |
| Serious Eye Damage/Irritation | No data available |
| Sensitisation | No data available. |
| Skin Sensitization | No data available |
| Aspiration | No data available |
| Germ Cell Mutagenicity | No data available |
| Carcinogenicity | No data available |
| Lactation | No data available. |
| Single Exposure | No data available |
| Additional Information | To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. |
| Toxicity | No data available |
| Persistence and degradability |
No data available.
|
| Bioaccumulative potential | No data available |
| Mobility in soil | No data available |
| Results of PBT and vPvB assessment | Results of PBT and vPvB assessment |
| Endocrine disrupting properties |
No data available
|
| No data available | No data available |
| Waste treatment method | Offer surplus and non-recyclable solutions to a licensed disposal company. |
| Waste treatment of containers/packagings | Dispose of as unused product |
| UN number | ADR/RID: - IMDG: - IATA: - |
| Transport hazard class |
AADR/RID: - IMDG: - IATA: - |
| Packaging group | ADR/RID: - IMDG: - IATA: - |
| Environmental hazards |
ADR/RID: no IMDG Marine pollutant: no IATA: no
|
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. International Chemical Weapons Convention (CWC) Schedules of Toxic Chemicals and Precursors : Restrictions on the marketing and use of certain dangerous substances : Regulation (EC) No 649/2012 of the European Parliament and the Council concerning the export and import of dangerous chemicals : Candidate List of Substances of Very High Concern for Authorisation |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried outction |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
