Concrete CureGuard Curing Agent
- Part number
- RXSOL-67-1411-200
- Category
- Construction Chem
- Brand
- RXSOL
Overview
As a sealing coat, Concrete CureGuard Curing Agent will shield concrete surfaces from the damaging effects of ambient carbon dioxide gas and water-borne salts.
Technical specifications
Technical Details of Concrete CureGuard Curing Agent
| Characteristics | Result |
| Appearance | White Liquid |
| Boiling Point | ~100 deg C |
| Specific Gravity | ~1 |
| Water Solubility | Soluble |
Applications
Uses of CONCRETE CURING AGENT - Concrete CureGuard Curing Agent in CONSTRUCTION
-
Exterior and interior, horizontal & vertical concrete surfaces
-
Pre‐cast or pre‐stressed members
-
Cure freshly poured concrete
-
Residential, commercial and industrial applications
-
Acts as resistance against chemical attacks
-
Parking structures, driveways, patios, walkways
-
Manufacturing, assembly and warehouse facilities
-
The product is recommended for use in cement admixtures as curing additive.
- Bituminous emulsions
- Acrylic coatings
- Water based emulsion paints
- Epoxy resin coatings
- Polymer modified cement
Dosage and directions
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Concrete CureGuard Curing Agent |
| Part Number | RXSOL-67-1411-020 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla,Chennai, Visakhapatnam, Mumbai, Kolkata, Fujairah, Barka - Oman, Nairobi Kenya, Canada
| Phone | +91 22 27815540 / 27815542 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | Weight % |
| Propritory Blend of curing agents like acrylic emulsions | - | >70 |
| Classification under 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) |
Based on available data, the classification criteria are not met |
| Label Elements | None required |
| Hazards not otherwise classified (HNOC) | None identified |
| Inhalation | Remove from exposure, lie down. Move to fresh air. If not breathing, give artificial respiration. Obtain medical attention. |
| Skin Contact / Absorption | Wash off immediately with soap and plenty of water. Obtain medical attention. |
| Eye Contact | Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention. |
| Ingestion | Do not induce vomiting. Never give anything by mouth to an unconscious person. Drink plenty of water. Get medical attention. If possible drink milk afterwards |
| Most important symptoms/effects, acute and delayed | No information available. |
| Information to physician | Treat symptomatically. |
| Suitable Extinguishing Media | Water spray. Carbon dioxide (CO 2). Dry chemical. Chemical foam. |
| Unsuitable Extinguishing Media | No information available |
| Method | No information available |
| Autoignition Temperature | 245 °C / 473 °F |
| Explosion Limits |
Upper No data available Lower No data available Sensitivity to Mechanical Impact No information available Sensitivity to Static Discharge No information available |
| Specific Hazards Arising from the Chemical | Keep product and empty container away from heat and sources of ignition. |
| Hazardous Combustion Products | Carbon monoxide (CO) Carbon dioxide (CO2) |
| Protective Equipment and Precautions for Firefighters | As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. |
| Personal Precautions/Protective Equipment / Emergency Procedures | Ensure adequate ventilation. Use personal protective equipment. |
| Environmental Precautions | See Section 12 for additional ecological information. |
| Methods and Materials for Containment and Cleaning Up | Sweep up or vacuum up spillage and collect in suitable container for disposal. |
| Precautions for safe Handling |
Avoid contact with skin and eyes. Do not breathe dust. |
| Conditions for Safe Storage | Keep containers tightly closed in a dry, cool and well-ventilated place. |
| Engineering Control Ventilation Requirements | None under normal use conditions. |
| Eye/face Protection | Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. |
| Skin and body protection |
Wear appropriate protective gloves and clothing to prevent skin exposure. |
| Respiratory Protection | No protective equipment is needed under normal use conditions. |
| Hygiene Measures | Handle in accordance with good industrial hygiene and safety practice. |
| Physical State | Liquid |
| Appearance | White |
| Odour | Odourless |
| Odor Threshold | No information available |
| Melting Point/Freezing Point | No information available |
| Boiling Point and Boiling Range | around 100 deg C |
| Evaporation Rate | Not Applicable |
| Flammability | No information available |
| Upper Flammable Limit | Not Applicable |
| Lower Flammable Limit | Not Applicable |
| Vapour Pressure | Not Applicable |
| Specific Gravity (Water=1) | 1 kg/cm3 |
| Solubility | Soluble in water |
| Autoignition Temperature | 245 °C / 473 °F |
| Decomposition Temperature | No information available |
| Viscosity per second | > 10 |
| Reactivity | Hazard None known, based on information available |
| Stability | Stable under normal conditions. |
| Conditions to Avoid | Incompatible products. |
| Incompatible Materials | Strong oxidizing agents |
| Hazardous Decomposition Products | (CO), Carbon dioxide (CO2) |
| Hazardous Polymerization Hazardous polymerization | does not occur. |
| Hazardous Reactions | None under normal processing |
Chronic Toxicity – Carcinogenicity Component
| Toxicologically Synergistic Products | No information available |
| Irritation | No information available |
| Sensitization | No information available |
| Carcinogenicity | The table below indicates whether each agency has listed any ingredient as a carcinogen |
| Mutagenic Effects | No sensitizing effects known |
| Reproductive Effects | No information available. |
| Developmental Effects | No information available. |
| Teratogenicity | No information available. |
| STOT - single exposure | None known |
| STOT - repeated exposure | None known |
| Aspiration hazard | No information available |
| Symptoms / effects,both acute and delayed | No information available |
| Endocrine Disruptor Information | No information available |
| Other Adverse Effects | The toxicological properties have not been fully investigated. |
| Persistence and Degradability | Soluble in water |
| Bioaccumulation/ Accumulation | No information available. |
| Mobility | Is not likely mobile in the environment due its low water solubility. |
| Waste From Residues/Unused Products | Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Chemical waste generators must also consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification |
| DOT | Not regulated |
| TDG | Not regulated |
| IATA | Not regulated |
| IMDG/IMO | Not regulated |
U.S. Federal Regulations
| TSCA 12(b) | Not applicable |
| SARA 313 | Not applicable |
| SARA 311/312 Hazard Categories | See section 2 for more information |
| CWA (Clean Water Act) | Not applicable |
| Clean Air Act | Not applicable |
| OSHA Occupational Safety and Health Administration | Not applicable |
| CERCLA | Not applicable |
| California Proposition 65 | Not applicable |
| U.S. Department of Homeland Security | This product does not contain any DHS chemicals. |
| Other International Regulations | Mexico - Grade No information available |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Concrete CureGuard Curing Agent manufacturer, exporter and supplier Mumbai, Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Oman Barka, Nairobi Kenya Africa, Canada
