Butyl Glycol LR Grade
- Part number
- RXSOL-60-2099-001
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
RXSOL-20-2099-210 A fast-evaporating glycol ether with an excellent balance of hydrophilic and hydrophobic character; excellent active solvency and coupling properties.is a very versatile solvent product with a good balance of many different properties. With a nearly equal balance of hydrophobic and hydrophilic character, RXSOL-20-2099-210 provides excellent performance in coatings, cleaners, and many other types of products. It is one of our fastest saling Product whis is frequently use for Dobule Bottom Tank Cleaning Purpose. RXSOL-20-2099-210 is compatible with a wide range of resin types, and it also offers 100% water solubility.
Applications
Active solvent for solvent-based coatings.
Coalescent for industrial water-based coatings.
Coupling agent for architectural water-borne coatings.
Coupling agent and solvent in household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants.
Primary solvent in solvent-based silk screen printing inks.
Coupling agent for resins and dyes in water-based printing inks.
Solvent for agricultural pesticides.
Very Effective and multi Tank Cleaning Active solvent for solvent-based coatings.
Coalescent for industrial water-based coatings.
Coupling agent for architectural water-borne coatings.
Coupling agent and solvent in household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants.
Primary solvent in solvent-based silk screen printing inks.
Coupling agent for resins and dyes in water-based printing inks.
Solvent for agricultural pesticides.
Very Effective and multi Tank Cleaning
Coalescent for industrial water-based coatings.
Coupling agent for architectural water-borne coatings.
Coupling agent and solvent in household and industrial cleaners, rust removers, hard surface cleaners, and disinfectants.
Primary solvent in solvent-based silk screen printing inks.
Coupling agent for resins and dyes in water-based printing inks.
Solvent for agricultural pesticides.
Very Effective and multi Tank Cleaning
Dosage and directions
Chemical Tank Cleaning
Spraying –
The tank should be sprayed with BSOLV, and then left for 45 minutes. After 45 minutes the tank should be butterworthed warm 50-60 o C for 30 minutes, followed by a 4 hour hot wash 80 – 85 o C, after which fresh water rinse and dry the tank. All safety precautions must be taken whenever handling this product.
Re-circulation –
Sufficient BSOLV should be filled into the tank so that the cargo pump and butterworth machines function properly. Circulations should be carried out for at least 4 and ideally 6 hours and all areas of the tanks must be rinsed. The tank MUST be at least cleaned to a good Water White standard and must be dry, before filling the Butyl Glycol. If another tank is to be circulated, then the product can be directly transferred. IF not, it can be returned to drums for further use at a later date. Following the circulations, the same washing procedure is carried out as outlined above in the spraying section.
* Use a strainer at the pumpstack when circulating any solution.Tank Lining – Stainless / Zinc / Epoxy
Characteristics and notes
Features
- Powerful solvency
- Coupling ability
- Coalescing ability
- Moderate evaporation rate
- High dilution ratio
- Wide range of applications
BUTYL CELLOSOLVE or 2-Butoxyethanol is an organic compound with the chemical formula BuOC2H4OH (Bu = CH3CH2CH2CH2). This colorless liquid has a sweet, ether-like odor, as it derives from the family of glycol ethers, and is a butyl ether of ethylene glycol. As a relatively nonvolatile, inexpensive solvent of low toxicity, it is used in many domestic and industrial products because of its properties as a surfactant.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-2099-001 |
| Product Type | Butyl Glycol LR Grade |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Kolkata, Mumbai, Chennai, Visakhapatanm, Kandla, Fujairah
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
|
Chemical Name |
CAS Number |
EC Number |
Index number |
|
Butyl Glycol |
111-76-2 2 |
203-905-0 |
603-014-00-0 |
Hazard description:
Information concerning particular hazards for human and environment:
R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 36/38 Irritating to eyes and skin.
| General information | Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. |
|
After inhalation |
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.In case of unconsciousness place patient stably in side position for transportation. |
|
After skin contact |
Immediately wash with water and soap and rinse thoroughly. |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. |
|
After swallowing |
Call for a doctor immediately. |
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Mouth respiratory protective device.
Person-related safety precautions: Not required.
Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.
Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 111-76-2 2-butoxyethanol | |
|
PEL (USA) REL (USA)
TLV (USA) |
240 mg/m³, 50 ppm Skin 24 mg/m³, 5 ppm Skin 97 mg/m³, 20 ppm Short-term value: 246 mg/m³, 50 ppm Long-term value: 98 mg/m³, 20 ppm Skin Short-term value: 50 ppm Long-term value: 25 ppm |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands:Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed goggles
|
Typical Physical Properties These properties are typical but do not constitute specifications. |
||
| Molecular weight (g/mol) | 118.2 | |
| Boiling point @ 760 mmHg, 1.01 bar | 340°F | 171°C |
| Flash point | 149°F | 65°C |
| Freezing point | -107°F | -77°C |
| Vapor pressure@ 20°C — extrapolated |
0.66 mmHg 0.89 mbar |
|
| Specific gravity (25/25°C) | 0.901 | |
|
Density @ 20°C @ 25°C |
7.53 lb/gal 7.49 lb/gal |
0.902 g/cm³ 0.898 g/cm³ |
| Viscosity (cP or mPa•s @ 25°C) | 2.9 | |
| Surface tension (dynes/cm or mN/m @ 25°C) | 27.4 | |
| Specific heat (J/g/°C @ 25°C) | 2.38 | |
| Heat of vaporization (J/g) at normal boiling point | 348 | |
|
Net heat of combustion (kJ/g) — predicted @ 25°C |
30.0 | |
| Autoignition temperature | 471°F | 224°C |
| Evaporation rate |
n-butyl acetate = 1.0) (diethyl ether = 1.0) |
0.079 154 |
|
Solubility, g/100 g @ 25°C Solvent in water Water in solvent |
||
|
Hansen solubility parameters (J/cm³)1/2 _d (Dispersion) _p (Polar) _h (Hydrogen bonding) |
16.0 7.6 12.3 |
|
| Flammable limits (vol.% in air)Lower (measured @ 170°C) Upper (measured @ 180°C) |
1.13 10.60 |
|
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
| Acute toxicity: | |||||
| LD/LC50 values relevant for classification: | |||||
|
Oral Dermal |
LD50 LC50 |
1480 mg/kg (rat) 400 mg/kg (rab) |
|||
| Primary irritant effect: | |||||
| on the skin | Irritant to skin and mucous membranes. | ||||
| on the eye | Irritating effect. | ||||
| Sensitization | No sensitizing effects known. | ||||
General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Product:
Recommendation Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
Land transport ADR/RID (cross-border)
• ADR/RID class: -
Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous
Materials.
• Risk phrases:
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
36/38 Irritating to eyes and skin.
• Safety phrases:
2 Keep out of the reach of children.
36/37 Wear suitable protective clothing and gloves.
46 If swallowed, seek medical advice immediately and show this container or label.
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Butyl Glycol Ether, Butyl Cellosolve, 2-Butoxyethanol, Ethylene glycol butyl Mono Ether Butyl Glycol supplier in Mumbai, Kandla, Chennai, Kolkata - Haldia, Visakhapatnam, Fujairah, Dubai, Sharjah, Abu Dhabi, Ajman, Barka, Muscat Oman
