BOVINE ALBUMIN FRACTION V POWDER
- Part number
- RXSOL-60-6604-088
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Bovine Albumin is primarily used to enhance the reactivity of blood group antibodies, either in direct agglutination tests or indirect antiglobulin test.
Applications
Bovine serum albumin (BSA) Fraction V has uses in many applications such as stabilizing proteins in solution, blocking non-specific binding in immuno-assays, and as a protein standard in various protein assays.
Dosage and directions
A stabilizing agent for proteins and enzymes, or a blocking agent in immuno-detection procedures such as western blotting and cell staining.
Characteristics and notes
Biochem/physiol Actions. Certain conformational and primary-sequence epitopes of BSA are suspected allergens in human beef and milk allergies.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | BOVINE ALBUMIN FRACTION V (POWDER) | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : BOVINE ALBUMIN FRACTION V (POWDER)
CAS-No. : 9048-46-8
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1 Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
3.2 Label elements
Not a hazardous substance or mixture.
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
4.1 Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see
section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Nature of decomposition products not known.
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
6.1 Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
6.2 Environmental precautions
No special environmental precautions required.
6.3 Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature 2 - 8 °C Light sensitive.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
•Personal protective equipment
•Eye/face protection
Use equipment for eye protection tested and approved under appropriate government
standards such as NIOSH (US) or EN 166(EU).
•Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with
applicable laws and good laboratory practices. Wash and dry hands.
If used in solution, or mixed with other substances, and under conditions which
differ from EN 374, contact the supplier of the CE approved gloves. This
recommendation is advisory only and must be evaluated by an industrial hygienist
and safety officer familiar with the specific situation of anticipated use by our
customers. It should not be construed as offering an approval for any specific use
scenario.
•Body Protection
Choose body protection in relation to its type, to the concentration and amount of
dangerous substances, and to the specific work-place., The type of protective
equipment must be selected according to the concentration and amount of the
dangerous substance at the specific workplace.
•Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of
dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use
respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
•Control of environmental exposure
No special environmental precautions required.
9.1 Information on basic physical and chemical properties
Odour Threshold: No data available
pH: 4,8 - 7,5
Melting point/freezing point :No data available
Initial boiling point and boiling range :No data available
Flash point: No data available
Evaporation rate: No data available
Flammability (solid, gas) :No data available
Upper/lower flammability or explosive limits :No data available
Vapour pressure: No data available
Vapour density: No data available
Relative density: No data available
Water solubility: solubleslightly soluble
Partition coefficient: n-octanol/water :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity :No data available
Explosive properties: No data available
Oxidizing properties: No data available
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Nature of
decomposition products not known. Other decomposition products - No data available
In the event of fire: see section 5
11.1 Information on toxicological effects
• Acute toxicity
No data available
•Skin corrosion/irritation
No data available
•Serious eye damage/eye irritation
No data available
•Respiratory or skin sensitisation
No data available
•Germ cell mutagenicity
No data available
•Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
•Reproductive toxicity
No data available
•Specific target organ toxicity - single exposure
No data available
•Specific target organ toxicity - repeated exposure
No data available
•Aspiration hazard
No data available
•Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have
not been thoroughly investigated.
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
No data available
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
ADR - Limited Quantity : 1 L
ADR - Tunnel code : D/E : Bulk or tank carriage: Passage forbidden through tunnels of
category D and
E. Other carriage: Passage forbidden through tunnels of category E.
14.2. Sea transport (IMDG) [English only]
Proper shipping name : ACETIC ACID,
UN N° : 2789
IMO-IMDG - Class or division : 8 : Corrosive substance. ( 3 : Flammable liquid. )
IMO-IMDG - Packing group : II
IMO- IMDG - Packing instructions : P001
IMO-IMDG - Limited quantities : 1 L
IMO-IMDG - Marine pollution : No
EMS-Nr : F-E S-C
14.3. Air transport (ICAO-IATA) [English only]
Proper shipping name : ACETIC ACID
UN N° : 2789
IATA - Class or division : 8 : Corrosive substance. ( 3 : Flammable liquid. )
IATA - Packing group : II
IATA - Passenger and Cargo Aircraft : ALLOWED
- Passenger and Cargo - Packing : 851
instruction
- Passenger and Cargo - Maximum : 1 L
Quantity/Packing
IATA - Cargo only : ALLOWED
- Cargo only - Packing instruction : 855
- Cargo only - Maximum Quantity/ : 30 L
Packing
IATA - Limited Quantites : 0.5 L
ERG-Nr : 8F
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
BOVINE ALBUMIN FRACTION V POWDER manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
BOVINE ALBUMIN FRACTION V POWDER is available in small packing as well as in bulk. Buy premium quality BOVINE ALBUMIN FRACTION V POWDER and other lab chemicals from one of the most trusted brands.
