Corrosion Inhibitor
- Part number
- RXSOL-16-1047-025
- Category
- Corrosion Inhibitor
- Brand
- RXSOL
Overview
RXSOL-16-1047-025 corrosion Inhibitor is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.
Technical specifications
Corrosion inhibitor that is used on metal equipment and surfaces that are acid cleaned to prevent the formation of rust.
Applications
The addition of Acid corrosion Inhibitor RXSOL-16-1047-025, inhibitors to Acid solution provides maximum protection for equipment during:
- a. The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equipment.
- b. The removal of scale and deposits from equipment in refineries, utility companies,paper mills, chemical plants and other industries.
Acid corrosion Inhibitor RXSOL-16-1047-025 inhibitors meet the requirements of Military Specification Nos.MIL-I-17433 and MIL-C-17434.
Dosage and directions
For each 1000 gallons of either 3% or 5 % by weight* hydrochloric acid solution, not less than the following amount of Acid corrosion Inhibitor RXSOL-16-1047-025 should be used:
1 gallon for a cleaning temperature of 150° Fahrenheit.
2 gallons for a cleaning temperature of 175° Fahrenheit.
3 gallons for a cleaning temperature of 200° Fahrenheit.
* A 5% by weight hydrochloric acid solution contains 14.1% by volume of 20° Bé hydrochloric acid.
The exceptional strength and heat stability of Acid corrosion Inhibitor RXSOL-16-1047-025 give the user a considerable safety factor in relation to temperature, acid strength, and time. Acid corrosion Inhibitor RXSOL-16-1047-025 may be added to either the diluted or concentrated hydrochloric acid. In either case, Acid corrosion Inhibitor RXSOL-16-1047-025 should be thoroughly mixed with the acid by stirring or agitation.
The hydrochloric acid solution inhibited with Acid corrosion Inhibitor RXSOL-16-1047-025 is best circulated through the equipment to be cleaned. When circulation cannot be accomplished, the equipment should be filled with the inhibited acid and allowed to react for sufficient time to remove the objectionable deposits. To estimate the proper acid concentration and cleaning time, samples of the deposits to be removed can be tested in the laboratory prior to cleaning. If heating of the equipment to be cleaned or acid solution is desired to speed the cleaning action, it should be done prior to the start of the cleaning operation.
Characteristics and notes
Storage and Disposal
Acid corrosion Inhibitor RXSOL-16-1047-025 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL-16-1047-025 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL-16-1047-025 be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.
Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-
Disposal information for Acid corrosion Inhibitor RXSOL-16-1047-025 is given on the Material Safety Data Sheet for each product.The industrial cleaning bath is acidic and contains hydrochloric acid and organic Acid corrosion Inhibitor RXSOL-16-1047-025 components. Waste treatment , neutralization is required. The industrial cleaning bath and sludge can contain ingredients other than those in the chemical as supplied and analysis of the solution and/or sludge is required before waste treatment and disposal.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | : | RXSOL-16-1047-025 |
| Product Type | : | Corrosion Inhibitor |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah, Muscat, Kenya, Uganda
| Phone | : | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | rxsolchemicals@gmail.com |
| Chemica Name | Concentration | CAS Number | EC Number | R Phrases* | Symbols |
| Sodium Nitrite | 10-30 | 7632-00-0 | 231-555-9 | 8, 25, 50 | T, O,N |
| Sodium Tetraborate 10 aq | 1-5 | 1303-96-4 | 215-540-4 | 62,63 | Xn |
| Benzothiazol-2-thiol | 0.1-.02 | 149-30-4 | 2299129 | 34,37 | O |
| Proprietary Blend | 65-89 | -- | -- | -- | -- |
| Odour | Odourless |
| Appearance | Pale Yellowis to Clear Liquid, soluble in water |
| Contact with eyes | May cause pain |
| Contact with skin | In cases of severe exposure, severe irritation may develop |
| Inhalation | Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
| Ingestion | Toxic if swallowed (R25) |
| Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. Contaminated clothing should be laundered before reuse. When in doubt or symptoms persist, seek medical attention. |
| Contact with Eye |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes Irrigate eyes thoroughly whilst lifting eyelids Obtain immediate medical attention |
| Ingestion |
Never make an unconscious person vomit or drink fluids Give water or milk to drink Induce vomiting (only if patient is conscious) Obtain immediate medical attention |
| Inhalation |
Inhalation is unlikely to occur Remove patient to fresh air When in doubt or symptoms persist, seek medical attention |
| General | In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) |
|
- Nitrogen oxides may be formed |
| Personal Precautions | Wear protective clothing as per section 8 |
| Environmental Precautions | Do not allow to enter public sewers and watercourses |
| Immediate Actions | Use appropriate containment to avoid environmental contamination (S57) |
| Clean Up Actions |
Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete |
| Special Precautions | Wear protective clothing as per section 8 |
| Handling |
Wear protective clothing as per section 8 |
| Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from heat Protect from frost |
| Exposure controls | No special precautions are required for this product |
| Occupational exposure controls | Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) |
Gloves Goggles suit No_Smoking
| Odour | Odourless |
| Appearance | Pink clear Liquid, soluble in water |
| pH | Alkaline at 100 % concentration |
| Boiling point | 100 °C at 760 mm /Hg |
| Vapour pressure | not known |
| Vapour density | not applicable |
| Freezing point | <0 °C at 760 mm/Hg |
| Completely soluble in water | |
| Specific gravity (water=1) | 1.10 to 1.20 |
|
- This article is considered stable under normal conditions |
| Toxicological information | No experimental data available |
| Inhalation | Not applicable |
| Contact with skin | In cases of severe exposure, severe irritation may develop |
| Contact with eyes |
May cause severe irritation May cause pain |
| Ingestion | Toxic if swallowed (R25) |
| Carcinogenicity | No evidence of carcinogenic effects |
| Ecotoxicity |
This product contains components which are classified in the EU as dangerous for the environment. May cause acute effects in the aquatic environment |
| Mobility | Completely soluble in water |
| Persistence and Biodegradability | Its main ingredients will either dissolve rapidly and dissociate in water or are readily/inherently biodegradable. |
| Bioaccumulation Potential | Bioaccumulation of the components in this product is insignificant. |
| Other Adverse Effects | No environmental problems are expected when the product is used / handled correctly. In its intended use, the product will not be released into the environment. |
| Classification | EU Waste class: 06.03 This material and/or its container must be disposed of as hazardous waste |
| Disposal considerations | Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation |
- Not classified as hazardous for transport
| Classification and labeling |
Contains Benzothiazol-2-thiol. May produce an allergic reaction. |
| Risk Phrases | Toxic if swallowed (R25) |
| Safety Phrases |
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45) This material and its container must be disposed of in a safe way (S35) |
|
Text of R and S phrase codes used in this safety data sheet:- R25: Toxic I f swallowed; R43: May cause sensitisation DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
Availability
Acid corrosion Inhibitor RXSOL-16-1047-025 manufacturer and supplier in Mumbai, Surat, Gandhidham - Kandla, Surat, Gujrat, Kudra Bihar, Chennai - Ennore, Visakhapatnam - Gangavaram, Kolkata - Haldia, Fujairah - Dubai - Sharjah Middle East UAE, Muscat, Sohar, Oman, Varanashi UP India
