RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Medicine

Cupric Sulphate Pentahydrate

Copper sulphate pentahydrate is safe for all animal species up to the maximum total copper content authorised in feed.
Part number
RXSOL-95-9503-500
Category
Medicine
Brand
RXSOL
Cupric Sulphate Pentahydrate

Overview

Copper sulphate pentahydrate is safe for all animal species up to the maximum total copper content authorised in feed. No concerns for consumer safety are expected from the use of the feed additive. The maximum residue limits (MRLs) for copper in foods of animal origin established by European Union pesticides legislation are not consistent with legal practices in animal nutrition. As copper is an essential micronutrient, the FEEDAP Panel is not in favour of establishing MRLs for animal products, unless there is a clear consumer safety issue; if MRLs are to be maintained, the Panel has proposed amended values.

The additive is an eye irritant and may induce allergic dermatitis in sensitive persons.

 

Applications

Copper sulfate is also used to test blood for anemia. The blood is tested by dropping it into a solution of copper sulfate of known specific gravity – blood which contains sufficient hemoglobin sinks rapidly due to its density, whereas blood which does not sink or sinks slowly has insufficient amount of hemoglobin.


Copper Sulphate is commonly used by gardeners and commercial farmers to prevent problems with fungus or mold The copper status of the soil, together with the frequency of application and quantity of copper sulfate applied, will determine the effects of copper sulfate on plants.

Used in an area of copper-deficient soil, copper sulfate enriches the soil and provides an essential nutrient to growing plants. When soil is copper-deficient, young plants may develop chlorosis, a condition in which leaves yellow due to lack of chlorophyll. Copper deficiencies can also cause stunted or atypical growth; young plants in very nutrient-deficient soil may simply die. Wilting, lack of flowers and reduced fruit harvest are all likely effects of copper-deficient soil. Copper sulfate prevents these problems. Test soil regularly, and apply copper sulfate as needed in a spray or fertilizer preparation.

Various Applications of Copper Sulphate:
 

  • Agriculture: Technical Grade Fungicide used for making of Bordeaux Mixture
  • Industrial : It is largely used as Textile mordant and also used in Electroplating and Dyes Intermediate

Characteristics and notes

The use of copper compounds in aquaculture is not expected to pose a risk. The limited database available on the influence of copper to the development of antibiotic resistance in gut and soil bacteria indicates that high copper concentrations in the microbial environment increase the number of copper-resistant bacteria, and copper resistance seems to be correlated with more frequent resistance to several antibiotics in certain bacterial species. A potential copper threshold concentration could not be derived. The total pool of macrolide resistance in animals probably originates from antibiotic treatment and not from the use of high dietary copper. The extent to which copper-resistant bacteria contribute to the overall antibiotic resistance can not be quantified at present. Copper sulphate pentahydrate is efficacious in meeting animal requirements.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Cupric Sulphate Pentahydrate
Part Number RXSOL-95-9503-500

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 27815540 -42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

Chemical Name

Concentration

CAS Number

Cupric Sulphate Pentahydrate

99-100 %

7758-99-8

Chemical Formula : CuSO4.5H2O
Molecular weight : 249.69 g/mol

Potential Acute Health Effects:
 Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.

Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells.
TERATOGENIC EFFECTS: Not available. DEVELOPMENTAL TOXICITY: Not available. The substance may be toxic to kidneys, liver. Repeated or prolonged exposure to the substance can produce target organs damage.


Contact with skin

In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.

Contact with eyes

Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

Ingestion

Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If large quantities of this material are swallowed, call a physician immediately. Loosen tight clothing such as a collar, tie, belt or waistband.

Inhalation

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

General

Not available.

Flammability of the Product: Non-flammable.
Auto-Ignition Temperature: Not applicable.
Flash Points: Not applicable.
Flammable Limits: Not applicable.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances: Not applicable.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available. Fire Fighting Media and Instructions: Not applicable.
Special Remarks on Fire Hazards:
When heated to decomposition it emits toxic fumes. Solutions are acidic and can react with magnesium to evolve flammable hydrogen gas Special Remarks on Explosion Hazards: Nitromethanes and copper salts spontaneously form explosive materials.

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

No special precautions are required for this product.

Small Spill

Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.

Large Spill

Use a shovel to put the material into a convenient waste disposal container. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with local authorities.

Precuation

Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as metals, alkalis.

Storage

Keep container tightly closed. Keep container in a cool, well-ventilated area.

Engineering Control

Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.

Personal Protection

Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.

Occupational exposure controls

Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.

Exposure Limits
TWA: 1 (mg/m3) from ACGIH (TLV) [United States] Inhalation TWA: 0.1 (mg/m3) from OSHA (PEL) [United States] Inhalation.
TWA: 1 (mg/m3) from NIOSH InhalationConsult local authorities for acceptable exposure limits.

Goggles 

Odour

Odourless

Appearance

Crystalline granules solid. Powdered, Light Blue

pH

NA

Boiling point

150°C (302°F)

Melting Point

110°C (230°F)

Vapour pressure

Not known

Odor Threshold

NA

Specific Gravity                   2.28 @ 15.6 deg. C(Water = 1)

Vapor Density

Not available.

Solubility

Easily soluble in cold water

Stability

The product is stable.

Instability Temperature

Not available.

Conditions of Instability

Incompatibles

Incompatibility with various substances

Reactive with metals, alkalis.

Corrosivity

Highly corrosive in presence of steel.

Special Remarks on Reactivity:

Air Sensitive. Slowly efforescent in air. Solutions of hyprobromite are decomposed by powerful catalytic action of cupric ions, even as impurities. Incompatible with finely powdered metals.

Polymerization

Will not occur.


Routes of Entry:  Inhalation. Ingestion.

Toxicity to Animal

Acute oral toxicity (LD50): 300 mg/kg [Rat.]. Acute dermal toxicity (LD50): >2000 mg/kg [Rat].

Chronic Effects on Humans

MUTAGENIC EFFECTS: Mutagenic for mammalian somatic cells. May cause damage to the following organs: kidneys, liver.

Other Toxic Effects on Humans

Hazardous in case of skin contact (irritant), of ingestion, of inhalation.

Special Remarks on Toxicity to Animal

Lowest Published Lethal Dose: LDL [Human] - Route: Oral; Dose: 1088 mg/kg

Special Remarks on Chronic Effects on Humans

May affect genetic material based on animal data

Special Remarks on other Toxic Effects on Humans

Acute Potential Health Effects: Skin: Causes skin irritation. May cause skin burns. It may cause and itching allergic eczema. Eyes: Causes eye irritation. May cause eye burns. It may cause conjunctivitis, corneal discoloration, ulceration and turbidity of the cornea. Inhalation: Causes respiratory tract (nose, throat, lung) irritation with coughing and wheezing. May cause ulceration and perforation of the nasal septum if inhaled in excessive quantities. Burning copper sulfate may result in irritating and poisonous gases which may irritate the respiratory tract and lungs, and may cause fume metal fever which is characterized by flu-like symptoms such as fever, chills, muscle aches. Ingestion: Harmful if swallowed. May cause gastrointestinal tract irritation with nausea, vomiting, diarrhea, metallic taste, burning sensation in the stomach or epigastrum, abdominal pain, and possible gastrointestinal tract bleeding. May affect metabolism(metabolic acidosis), liver (liver damage, jaundice), blood (Methemoglobin, hemalytic anemia), urinary system (kidney damage, hematuria, hemoglobinuria, albuminuria), behavior/nervous systems (somnolence, tremor, psychosis, muscle weakness, coma), cardiovascular system(lowering of blood pressure, dysthrythmia). Oral mucosa, vomitus, stools, and saliva may be stained blue or green following ingestion. Aspiration pneumonia may develop following emesis and CNS depression. Chronic Potential Health Effects: Skin: Repeated or prolonged skin contact may cause thickening of the skin.

Ecotoxicity

Ecotoxicity in water (LC50): 0.1 ppm 48 hours [Goldfish]. 0.1 mg/l 96 hours [Rainbow Trout]. 2.5 mg/l 96 hours [Rainbow Trout].

Products of Biodegradation

Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.

Toxicity of the Products of Biodegradation.

The products of degradation are less toxic than the product itself.

Special Remarks on the Products of Biodegradation

If released to soil, copper sulfate may leach to groundwater, be partly oxidized, or bind to humic materials, clay, or hydrous of iron and manganese. In water, it will bind to carbonates as well as humic materials, clay and hydrous oxides of iron and manganese. Copper is accumulated by plants and animals, but it does not appear to biomagnify from plants to animals. This lack of biomagnification appears common with heavy metals. In air, copper aerosols (in general) have a residence time of 2 to 10 days in an unpolluted atmosphere and 0.1 to >4 in a polluted, urban areas.

Classification

EU Waste class: -

Disposal considerations

Copper dusts or mist or copper compounds may be disposed of in Group III sealed containers in a secure sanitary landfill. Copper containing soluble wastes can be concentrated through the use of ion exchange, reverse osmosis, or evaporators to the point where copper can be electrolytically removed and sent to a reclaiming firm. If recovery is not feasible, the copper can be precipitated through the use of caustics and the sludge depositied in a chemical waste landfill. Be sure to consult with authorities (waste regulators). Waste must be disposed of in accordance with federal, state and local environmental control regulations.

UN number
ADR/RID: 3077 IMDG: 3077 IATA: 3077

UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Copper sulphate
pentahydrate)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Copper sulphate
pentahydrate)
IATA: Environmentally hazardous substance, solid, n.o.s. (Copper sulphate pentahydrate)

Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9

Packaging group
ADR/RID: III IMDG: III IATA: III

Environmental hazards
ADR/RID: yes IMDG Marine pollutant: no IATA: yes

Special precautions for user
No data available

Federal and State Regulations:
SARA 313 toxic chemical notification and release reporting: Copper compounds CERCLA: Hazardous substances.: Copper
sulfate pentahydrate: 10 lbs. (4.536 kg)

Other Regulations: OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).

Other Classifications:

WHMIS (Canada)
: CLASS D-2B: Material causing other toxic effects (TOXIC).
DSCL (EEC):
R22- Harmful if swallowed. R36/38- Irritating to eyes and skin. R50/53- Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. S22- Do not breathe dust. S60- This material and its container must be disposed of as hazardous waste. S61- Avoid release to the environment. Refer to special instructions/Safety data sheets.

HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 0
Personal Protection: E

National Fire Protection Association (U.S.A.):
Health: 2
Flammability: 0
Reactivity: 0

Specific hazard:
Protective Equipment:
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Cupric Sulphate Pentahydrate manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Cupric Sulphate Pentahydrate at a competitive price from us. We have ready stock of Cupric Sulphate Pentahydrate in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches