Methyl2pyrrolidonen
- Part number
- RXSOL-19-1359-210
- Category
- Paint and Cleaning solvent
- Brand
- RXSOL
Overview
NMP Methyl2pyrrolidonen SUPPLIER in Mumbai, Kandla - Gandhidham, Chennai - Ennore, Kolkata, Fujairah, Dubai, Sharjah.
Technical specifications
| PRODUCT NAME | : | METHYL2PYRROLIDONE(N-) |
| CAS number | : | 872-50-4 |
| UN number | : | |
| Formula | : | CH3NCH2CH2CH2CO |
| Odour | : | MILD AMINE |
| Solubility in water | : | SOLUBLE |
| Density | : | 1.027 at 25 oC |
| Boiling point | : | 202 oC |
| Melting point | : | -24 oC |
| Viscosity | : | |
| Flashpoint | : | 95 oC |
| Explosive limits | : | |
| Vapour pressure | : | 0.3 mbar at 20oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 100 ppm 400 mg/m3 |
| Pollution category 1994 | : |
D |
Applications
Used as a solvent in pharmaceutical synthesis because of its broad solvancy.
OIL REFINING Solvant for selctive extraction of aromatic compound mixers and co-solvant for water resolution. Decoloring agent for oil & waxes. Extraction slvent in lube oil processing and in natural and Synthetic Gas purification.
Also uses as Solvent for paint stripping and resin. Metal finishing and PCB manufacturing. Pigment dispersant and disperser for paints and vamishes.
Dosage and directions
N-Methyl-2 Pyrrolidone Supplier and stockist in UAE, Middle East.
Characteristics and notes
STORAGS :- Mild or Stainless Steel. Store away from heat sparkes, open flames, storng oxidizing agents and direct sunlight.
PACKING :- 200 kgs. Net Weight in M.S. Drums.
HEALTH & SAFETY :- NMP is irritating to skin, eyes. In case of contact, affected areas should be washed with plenty of water. If sticky, use waterless cleaner. Inhalation should be avoided. If overcome by exposure, victim should be moved to fresh air, Give oxygen or artifical respiration as needed. Obtain emergency medical attention. Prompt action is essential.
E C Number :- 212-828-1
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-19-1359-210 |
| Product Type | N-Methyl Pyrrolidone |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai. Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
|
Chemical Name |
CAS Number |
EC Number |
Index number |
|
N -methyl-2-pyrrolidone |
872-50-4 |
212-828-1 |
606-021-00-7 |
Hazard description:
Information concerning particular hazards for human and environment:
R 36/38 Irritating to eyes and skin.
|
After inhalation |
In case of unconsciousness place patient stably in side position for transportation. |
|
After skin contact |
Immediately wash with water and soap and rinse thoroughly. |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor. |
|
After swallowing |
If symptoms persist consult doctor. |
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Special hazards caused by the substance, its products of combustion or resulting gases: During heating or in case of fire poisonous gases are produced.
Protective equipment: Mouth respiratory protective device.
Person-related safety precautions: Mount respiratory protective device.
Measures for environmental protection: Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water
Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection: Keep respiratory protective device available.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed.
Additional information about design of technical facilities: No further data; see item 7.
| Ingredients with limit values that require monitoring at the workplace: | |
| 872-50-4 N-methyl-2-pyrrolidone | |
|
WEEL (USA) WEL (Great Britain) |
10 ppm Skin Short-term value: 309 mg/m³, 75 ppm Long-term value: 103 mg/m³, 25 ppm Sk |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed.Wash hands before breaks and at the end of work.Avoid contact with the eyes and skin.
Respiratory protection: Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed goggles
|
General Information |
|
|
Form |
Fluid |
|
Colour |
Colourless |
|
Odour |
Amine-like |
|
Change in condition |
|
|
Melting point/Melting range |
-24°C |
|
Boiling point/Boiling range |
202°C |
|
Flash point |
93°C |
| Ignition temperature | 270°C |
|
Danger of explosion |
Product does not present an explosion hazard. |
| Explosion limits: | |
| Lower | 1.3 Vol % |
| Upper | 9.5 Vol % |
| Vapour pressure at 20°C | 0.3 hPa |
| Density at 20°C | 1.026 g/cm³ |
| Solubility in / Miscibility with water | Fully miscible. |
| pH-value (100 g/l) at 20°C | l. basisch |
| Viscosity | |
| Dynamic at 25°C | 1.65 mPas |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
| Acute toxicity: | |||||
| LD/LC50 values relevant for classification: | |||||
|
Oral Dermal |
LD50 LD50 |
3914 mg/kg (rat) 8000 mg/kg (rabbit) |
|||
| Primary irritant effect: | |||||
| on the skin | Irritant to skin and mucous membranes. | ||||
| on the eye | Irritating effect. | ||||
| Sensitization | No sensitizing effects known. | ||||
General notes:Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Product:
Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
Land transport ADR/RID (cross-border)
• ADR/RID class: -
• Maritime transport IMDG:
• IMDG Class: -
• Marine pollutant: No
• Air transport ICAO-TI and IATA-DGR:
• ICAO/IATA Class: -
Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases:
36/38 Irritating to eyes and skin.
• Safety phrases:
2 Keep out of the reach of children.
41 In case of fire and/or explosion do not breathe fumes.
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Methyl2pyrrolidonen manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Methyl2pyrrolidonen at a competitive price from us. We have ready stock of Methyl2pyrrolidonen in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
