POLYPHOSPHORIC ACID FOR SYNTHESIS
- Part number
- RXSOL-60-6605-271
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Synthesis and composition The basic compounds for the production of polyphosphoric acid (PPA) are phosphorus pentoxide (P2O5) and phosphoric acid (H3PO4), as shown in Figure 2. Phosphorus is first oxidized to phosphorus pentoxide, which crystallizes as P4O10. Upon its reaction with water, phosphoric acid is produced.
Applications
Polyphosphoric acid can be used in the manufacture of special supported catalysts, e. g. for use in the production of cumene from benzene. Polyphosphoric acid can be used in the descaling and brightening of metal surfaces. Polyphosphoric acid is suitable for the drying of gas streams.
Dosage and directions
PPA is also known as β-hydroxyamphetamine, and is a member of the phenethylamine and amphetamine chemical classes. ... PPA, structurally, is in the substituted phenethylamine class, consisting of a cyclic benzene or phenyl group, a two carbon ethyl moiety, and a terminal nitrogen, hence the name phen-ethyl-amine.
Characteristics and notes
The name phosphoric acid is the IUPAC name of orthophosphoric acid. The prefix –ortho is used to distinguish this acid from other phosphorous containing acids (polyphosphoric acids). There is no difference between orthophosphoric acid and phosphoric acid because both these names describe the same compound.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|||
| Product Type | POLYPHOSPHORIC ACID FOR SYNTHESIS | |||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
2.1 Substances CAS-No. : 8017-16-1
Substance name Contents CAS No
Polyphosphoric acid 100 % 8017-16-1
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin corrosion (Category 1B), H314
For the full text of the H-Statements mentioned in this Section, see Section 16.
3.2 Label elements
Labelling according Regulation (EC) No 1272/2008
Symbol(s) : C: Corrosive
R Phrase(s) : R34 : Cause burns.
S Phrase(s) : S26 : In the case of contact with eyes, rinse immediately with plenty of
water and seek medical advise.
S36/37/39 : Wear suitable protective clothing and gloves & eye/face protecting.
S45 : In case of accident or if you feel unwell, seek medical advice immediately (show
the label where possible).
Labelling according Regulation (EC) No 1272/2008
Hazard pictograms
Signal word: Danger
Hazard statement(s)
H314 Causes severe skin burns and eye damage.
Precautionary statement(s)
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
Supplemental Hazard Statements none
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
4.1 Description of first aid measures
• General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
• If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
• In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of
water. Consult a physician.
• In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
• If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see
section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Thermal decomposition may produce toxic fumes of phosphorus oxides and/or
phosphine, Phosphoric acid Oxides of phosphorus
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
6.2 Environmental precautions Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
Avoid inhalation of vapour or mist.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent
leakage. Hygroscopic. Store under inert gas.
Storage class (TRGS 510): 8B: Non-combustible, corrosive hazardous materials
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday.
• Personal protective equipment
• Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye
protection tested and approved under appropriate government standards such as NIOSH
(US) or EN 166(EU).
• Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.
If used in solution, or mixed with other substances, and under conditions which differ
from EN 374, contact the supplier of the CE approved gloves. This recommendation is
advisory only and must be evaluated by an industrial hygienist and safety officer familiar
with the specific situation of anticipated use by our customers. It should not be construed
as offering an approval for any specific use scenario.
• Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the
specific workplace.
• Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face
respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator
cartridges as a backup to engineering controls. If the respirator is the sole means of
protection, use a full-face supplied air respirator.
Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.
9.1 Information on basic physical and chemical properties
Odour Threshold: No data available
pH: No data available
Melting point/freezing point: 16 °C
Initial boiling point and boiling range: 300 °C at 1013 hPa
Flash point :No data available
Evaporation rate: No data available
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits: No data available
Vapour pressure :No data available
Vapour density : No data available
Relative density :2,060 g/cm3
Water solubility No data available
Partition coefficient: noctanol/ water :No data available
Auto-ignition temperature : No data available
Decomposition temperature: No data available
Viscosity: No data available
Explosive properties: No data available
Oxidizing properties No data available
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
Keep away from direct sunlight. Avoid moisture.
10.5 Incompatible materials
Bases, Reacts with water to generate heat and form posphoric acid. The reaction is not
violent
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Thermal
decomposition may produce toxic fumes of phosphorus oxides and/or phosphine,
Phosphoric acid Other decomposition products - No data available
Hazardous decomposition products formed under fire conditions. - Oxides of phosphorus
In the event of fire: see section 5
11.1 Information on toxicological effects
• Acute toxicity
•Skin corrosion/irritation
Serious eye damage/eye irritation
Causes serious eye damage. Risk of corneal clouding.
Respiratory or skin sensitisation
•Germ cell mutagenicity
•Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
•Reproductive toxicity
Specific target organ toxicity - single exposure
Acute oral toxicity - If ingested, severe burns of the mouth and throat, as well as a danger
of perforation of the oesophagus and the stomach. Acute inhalation toxicity - mucosal
irritations, Cough, Shortness of breath, Possible damages:, damage of respiratory tract
Specific target organ toxicity - repeated exposure
•Aspiration hazard
Additional Information
RTECS: Not available
Material is extremely destructive to tissue of the mucous membranes and upper
respiratory tract, eyes, and skin., Cough, Shortness of breath, Headache, Nausea
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or
higher.
12.6 Other adverse effects
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: 3264 IMDG: 3264 IATA: 3264
14.2 UN proper shipping name
ADR/RID: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (Polyphosphoric
acid)
IMDG: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (Polyphosphoric acid)
IATA: Corrosive liquid, acidic, inorganic, n.o.s. (Polyphosphoric acid)
14.3 Transport hazard class(es)
ADR/RID: 8 IMDG: 8 IATA: 8
14.4 Packaging group
ADR/RID: II IMDG: II IATA: II
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no
IATA: no 14.6 Special precautions for user
No data available
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLPRegulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[POLYPHOSPHORIC ACID FOR SYNTHESIS] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[POLYPHOSPHORIC ACID FOR SYNTHESIS] is available in small packing as well as in bulk. Buy premium quality [POLYPHOSPHORIC ACID FOR SYNTHESIS] and other lab chemicals from one of the most trusted brands.
