Vinyl Conditon for All surface
- Part number
- RXSOL-41-4110-010
- Category
- Automobiles
- Brand
- RXSOL
Overview
This premium silicone emulsion treatment conditions surfaces and protects against checking, dulling cracking, sun fading, hardening, deterioration and aging. Condition-all renews the original finish and restores " like new" luster to most any surface, with anti-soil and anti-static agents to repel dirt and dust, to keep surfaces looking their best. This formula is odorless, non-toxic, and non-corrosive, and contains no harmful solvents.
Also acts as VINYL CONDITIONER
Applications
Spray onto surface to be treated, and spread evenly with a cloth. Allow to penetrate several minutes, then buff dry with a clean cloth. To renew weathered or damaged surfaces, three applications are recommended as an initial treatment. Then maintain the finish as needed.
This product is available in a super concentrate that can be diluted with water 1 part concentrate to 3 to 5 parts water. (Condition-all concentrate )
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-41-410-010 |
| Product Type | Vinyl Conditon-All |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| INGREDIENTS | Conc % W/W | CAS no | EXPOSITION CL50 | LETHAL DOSE INGESTION DL50 |
| Propylene glycol | 1 -5 | 57-55-6 | N.D. | 22800 mg/kg (rat-oral) |
N/A
|
Contact with Eyes |
Immediately flush eyes with plenty of water for at least 15 minutes. Occasionally lifting upper and lower lids. Get medical attention at once. |
| Contact with skin |
It should be rinsed off with water. |
|
Ingestion |
If this product is swallowed, do not induce vomiting. If victim is conscious give plenty of water to drink. Get medical attention at once. (ANTIPOISON CENTER: 1-800-463-5060) |
|
Inhalation |
Move exposed person to fresh air. If irritation persists. Get medical attention promptly. |
|
Flammable |
No |
| Condition | Nothing |
|
Extinction |
Chemical foam, carbon dioxide, water |
|
Flash Point (open cup) |
Superior at 95° C |
| Autoinflammation temperature | N/D |
| Dangerous product made by combustion | Carbon oxide, nitrogen oxide |
| Eyes Protection | You don't need a safety google with normal using. |
| Respiratory Protection | You don't need a safety mask with normal using. |
| Skin Protection | You don't need a special thing for skin protection with normal using. |
| Technical installation | Put good ventilation for close chamber for eliminate a vapour could be concentrated. |
| Measures if a leaks and spills | Take off the leaks and put in a identify drums Rinse the floor with water |
| Elimination | Conform with federal and provincial laws Put in a closed material. Protect against the freeze |
N/A
N/A
| Physical State | White creamy liquid |
| Boiling Point | > 100°C |
| Odor | Odorless |
| pH | 6.5 - 7.0 |
| Freeze Point | 0°C |
| % Volatile | N/D |
| Density (20°C) | 1.00 g/cc |
| Vapor Pressure | N/D |
| Water solubility | yes |
| Vapor Density | N/D |
|
Chemical stability |
Stable |
|
Incompatibility with other products |
Reductor, oxidant and acid product |
| Conditions |
If the product enter in contact with acid or oxidizer (chlore) product they could be produce hot temperature. |
|
Polymerization |
None |
|
Decomposition product |
Carbon oxide, nitrogen oxide |
| Exposition limit | N/D |
|
Absorption way |
Inhalation ( ) Eyes (X) Skin ( ) Ingestion (X) |
|
Chronics exposure with the product |
N/D |
| Inhalation | No Object |
| Eyes | Irritation. |
| Skin | Should be irritating if the product is apply directly on skin |
| Ingestion | Irritation, nausea |
| Cancerogenicity | None |
| Synergics products | None |
N/A
N/A
N/A
N/A
N/A
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
