Zinc Phenolsulfonate
- Part number
- RXSOL-19-3902-025
- Category
- Hand Wash / Personal care
- Brand
- RXSOL
Overview
Zinc phenolsulfonate is a chemical compound that is used as an antimicrobial and astringent in cosmetics, medicine, and ophthalmic solutions. It is also known as zinc sulfocarbolate, zinc sulphophe- nate, and zinc p-hydroxysulfonate.
Applications
It is used as an antiperspirant, an antiseptic, and in insecticide formulations.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | Zinc Phenolsulfonate |
| Part Number | RXSOL-19-3902-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Product name | Cas No | Weight | Formula |
| ZINC PHENOLSULFONATE | 1300-55-6 | 100% | C12H26O16S2Zn |
| Signal Word | Warrning |
| Hazard Statements | Harmful if swallowed Causes skin irritation Causes serious eye irritation |
| Precautionary statements | Wash face, hands and any exposed skin thoroughly after handling Do not eat, drink or smoke when using this product Wear protective gloves Wear eye/face protection |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | No data available |
| General advice | National Capital Poison Center in the United States can provide assistanceif youhave a poison emergency and need to talk to a poison specialist. Call 1-800-222-1222. |
| If inhaled | No data available |
| Eye Contact | Flush eyes with water for 15 minutes. Get medical attention. |
| Swallowed | After swallowing: immediately make victim drink water (two glasses at most). Consult a physician. 4.2 Most import |
| Skin Contact | Wash off immediately with soap and plenty of water removing all contaminatedclothingandshoes. Get medical attention. |
| Inhalation | Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention. |
| Ingestion | Do not induce vomiting without medical advice. Never give anything by mouthtoanunconscious person. Obtain medical attention. |
| Most important symptoms and effects, both acute and delaye | Moderate skin irritation Moderate eye irritation |
| Indication of any immediate medical attention and special treatment needed | Treat symptomatically. |
| Flammability | No data available |
| Suitable extinguishing media | Carbon dioxide (CO2). Dry chemical. Water spraymist orfoam |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture | May be combustible at high temperatures. |
| Further information | Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
Carbon Monoxide, Carbon Dioxide. Sulfur oxides. Zincoxides. Zinc. |
| Advice for firefighters | First-Aid Providers: Avoid exposure to blood or body fluids. Wear gloves and other necessary protective clothing. Disposeof contaminated clothing and equipment as bio-hazardous waste.. |
| Protective Equipment | As in any fire, wear self-contained breathingapparatuspressure-demand, MSHA/NIOSH (approvedor equivalent)and full protective gear |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Ensure adequate ventilation. Keep people away from and upwind of spill/leak. Avoidcontact with skin, eyes and clothing. Use personal protective equipment. Do not touchdamaged containers or spilled material unless wearing appropriate protective clothing. Avoid dust formation. Remove all sources of ignition. |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | Prevent further leakage or spillage if safe to do so. Do not let product enter drains.Prevent from entering into soil, ditches, sewers, waterways, and/or groundwater |
|
Methods and materials for containment and cleaning |
Stop leak if you can do it without risk. Cover with plastic sheet to prevent spreading.Sweep up and shovel into suitable containers for disposal. Clean contaminatedsurface thoroughly |
| Reference to other sections | For disposal see section 13. |
| Advice on protection against fire and explosion | No data available |
| Incompatible materials | Oxidizing agentse |
| Hygiene measures | Avoid contact with skin, eyes and clothing. Wash hands before breaksandimmediately after handling the product When using, do not eat, drink or smoke |
| Advice on safe handling | Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Avoid dust formation. Donot ingest. Do not breathe dust. Keep away from heat and sources of ignition. Handle in accordance withgoodindustrial hygiene and safety practice. |
| Conditions for safe storage including any incompatibilities |
No data available |
| Storage conditions | Keep container tightly closed in a dry and well-ventilated place. Store at room temperature in the original container. Store away from incompatible materials |
| Storage class | No data available |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | Ensure adequate ventilation. Use process enclosures, local exhaust ventilation, or other engineeringcontrolstokeep airborne levels below recommended exposurelimits.If user operations generate dust, fume or mist, useventilation to keep exposure to airborne contaminantsbelow the exposure limit. |
| Eye/face protection | Safety glasses |
| Body Protection | Protective clothing. |
| Skin protection | Long sleeved clothing Chemical resistant apron gloves. |
| Respiratory protection |
Effective dust mask. Use a dust respirator under conditions where exposuretothe substance is apparent (e.g. generation of high concentration of dust (dust clouds) , inadequate ventilation, development of respiratory tract irritation), andengineering controls are not feasible. Be sure to use an approved/certifiedrespirator or equivalent
|
| Other Protection Measure | No data available |
| Physical state | Solid Crystalline powder |
| Colour | White |
| Odour | No data available |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | No data available |
| Boiling Point | No data available |
| Flash Point | No data available |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | No data available |
| Density | No data available |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | Soluble in Water |
| Ignition temperature | No data available |
| Particle characteristics | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibilityof hazardous reactions | No data available |
| Conditions to avoid | Heat. Avoid dust formation. Incompatible materials |
| Incompatible materials |
Oxidizing agents
|
| Hazardous decomposition products | Carbon oxides. Sulfur oxides. Zinc oxides |
| Acute toxicity | LD50 Oral - Rat - female - > 2.000 mg/kg (OECD Test Guideline 425) LC50 Inhalation - Rat - male and female - 4 h - > 6,04 mg/l - dust/mist (OECD Test Guideline 436) |
| Skin corrosion/irritation | Causes skin irritation. Moderate skin irritation |
| Serious eye damage/irritation | Causes serious eye irritation. Moderately irritating to the eyes |
| Respiratory or skin sensitization | May cause irritation of respiratory tract. Symptoms may include coughingandwheezing, and shortness of breath. |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | Test Type Ames test Test system Escherichia coli/Salmonella typhimurium Metabolic activation with and without metabolic activation Method OECD Test Guideline 47 |
| Reproductive toxicity | No data available |
| Specific target organ toxicity - single exposure |
No data available
|
| Additional Information | No data available |
| Persistence and degradability | No data available |
| Toxicity to fish | No data available |
| Toxicity to daphnia and other aquatic invertebrates | No data available |
| Toxicity | No data available |
| Toxicity to bacteria | No data available |
| Toxicity to algae | No data available |
| Products Biodegradation | No data available |
| Mobility in soil | No data availalble |
| Results of PBT and vPvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher |
| Other adverse effects | No data available |
| Product | Waste must be disposed of in accordance with Federal, State and Local regulation. |
| Contaminated packaging | Empty containers should be taken for local recycling, recovery or waste disposal |
| Waste treatment Method | No data available |
| UN number | ADR/RID:- | IMDG:- |
IATA:- |
| UN proper shipping name | ADR/RID:Not dengerous goods | IMDG:Not dengerous goods | IATA:Not dengerous goods |
| Transport hazard class(es) | ADR/RID:- | IMDG:- | IATA:- |
| Packaging group | ADR/RID:- | IMDG:- | IATA:- |
| Environmental hazards | ADR/RID:No | IMDG:No | IATA:No |
| Special precautions for user | No data available | ||
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | A Chemical Safety Assessment was not carried out for this substance. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
| No data available |
| No data available |