Your shopping cart is empty.
Product Code: RXSOL-37-1904-025
| Property | Typical value |
|---|---|
| Appearance | Clear to slightly opalescent, colorless–pale straw |
| Density | 1.15 - 1.2 kg/L |
| pH (neat) | Acidic |
| Solubility in water | Miscible in all proportions |
| Insolubles | ≤ 0.2 % (water-treatment grade) |
Works best when pH of water is 6-7
Key Features of Coagulant Clear AL
Product Code: RXSOL-25-1005-005
PROEDURE OF USE:-
1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.
2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.
3rd Method:-
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.
Product Code: RXSOL-15-1101-025
|
Appearance |
Clear colorless to light-yellow liquid |
|
Solubility in water |
Miscible |
|
pH |
Acidic |
Product Code: RXSOL-22-2006-210
Product Code: RXSOL-10-2006-030
Product Code: RXSOL-10-2006-210
Product Code: RXSOL-22-6709-210
Performance Characteristics
Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.
Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of RXSOL CIA 222.
Slump and Temperature Development: RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.
Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by RXSOL CIA 222.
Product Code: RXSOL-81-8120-050
Product Code: RXSOL-98-6580-025
| Appearance (Colour) | : White |
| Appearance (Form) | : Crystalline compound |
| Solubility (Turbidity) | : 50% aq. solution Clear |
| Solubility (Colour) | : 50% aq. solution Colourless |
| Assay | : min. 98.5% |
| pH (5% aq. solution) | : 5.0 - 6.0 |
| Loss on drying | : max. 0.2% |
| Sulphated Ash | : max. 0.01% |
| Iron (Fe) | : max. 0.0001% |
| Chloride (CI) | : max. 0.0005% |
| Nitrate (NO3) | : max. 0.001% |
| Arsenic (As) | : max. 0.00002% |
Product Code: RXSOL-98-6580-050
| Appearance (Colour) | : White |
| Appearance (Form) | : Crystalline compound |
| Solubility (Turbidity) | : 50% aq. solution Clear |
| Solubility (Colour) | : 50% aq. solution Colourless |
| Assay | : min. 98.5% |
| pH (5% aq. solution) | : 5.0 - 6.0 |
| Loss on drying | : max. 0.2% |
| Sulphated Ash | : max. 0.01% |
| Iron (Fe) | : max. 0.0001% |
| Chloride (CI) | : max. 0.0005% |
| Nitrate (NO3) | : max. 0.001% |
| Arsenic (As) | : max. 0.00002% |
Product Code: RXSOL-17-4160-025
Properties :
| Form | :Powder |
| Colour | :Off-white |
| Odour | :Odourless |
| Flash point | :Not applicable |
| Flammability | :Not flammable |
| Bulk density | :Approx. 750 kg/m3 |
| Self ignition | :Not self-igniting |
| Explosion hazard | :Not explosive |
| Fire promoting properties | :Not fire-propagating |
| Solubility in water |
:Forms a viscous solution. |
Anionic Polyelectrolyte is white colored free-flowing powder which is widely used in food processing, chemical, petrochemical, and dairy industries. It can also be used for destabilizing colloidal suspension by inducing flocculation and precipitation. This polyelectrolyte is required for stabilizing solutions and to impart desired characteristics. It is most commonly used for enhancing efficiency of filtration and clarification processing of sugar. The product offered by us is compatible to be used for any pH conditions which make it suitable for paper making and wastewater and drinking water treatment industries. It is known to have ability to settle inorganic suspended solids.
Product Code: RXSOL-23-3114-025
| Appearance | White Powder, Granular, |
| Chemical Name | Sodium Dichloroisocyanurate |
| Formula | C3O3N3Cl2Na |
| Chlorine | >62% |
| Molecular Weight | 219.95 |
| pH (1% solution) | 6.0 to 7.0 |
| Moisture | 0.5 to 1.00% max |
| Solubility @ 25°C | Completely soluble in water |
| Density | Tap density = 0.974 g/mL |
The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).
