Your shopping cart is empty.
Product Code: RXSOL-23-3025-210
12.5% wt. SODIUM HYPOCHLORITE - EXTRA - PURE
| Parameters | Specification Range | Typical |
|
Sodium Hypochlorite as NaOCl (%wt) |
12.5 - 13.2 | 13.0 |
| Available Chlorine (%wt) | 11.9 - 12.6 | 12.4 |
| Available Chlorine (%vol) | 14.3 - 15.3 | 15.0 |
| Available Chlorine grams/liter | 143 - 153 | 150 |
| Excess Caustic (%wt) | 0.25 - 0.80 | 0.30 |
| Specific Gravity @ 60°F | 1.197 - 1.220 | 1.210 |
| pH | 12.0 - 13.0 | 12.50 |
| Iron (Fe) ppm | <0.5 | 0.05 |
| Nickel (Ni) ppm | <0.2 | 0.02 |
| Copper (Cu) ppm | <0.2 | 0.05 |
| Mercury (Hg) ppb | 0.001 - 0.003 | 0.002 |
| Sodium Chloride (NaCl)% | <15.0 | 12.5 |
Appearance: Clear greenish-yellow liquid miscible in any proportion with water.
This product meets the requirements of NSF standard 60 for drinking water.
Sodium Hypo Chlorite
Electrolysis Process ( Pure & Concentrated )
This is an improved version of this method, known as the Hooker process, In the process, sodium hypochlorite (NaClO) formed when chlorine is passed into cold and dilute sodium salt solution. It is prepared with minimal separation between the anode and the cathode .The solution must be kept below 40 °C (by cooling coils) to prevent the undesired formation of sodium chlorate and to keep chlorine concentration up to 15%.
Chloro Alkali process ( Chlorine value is less )
E. S. Smith patented a method of sodium hypochlorite production involving electrolysis of brine to produce sodium hydroxide and chlorine gas, which then mixed to form sodium hypochlorite. This is known as the chloralkali process. Both electric power and brine solution were in cheap supply at the time, and various enterprising marketers took advantage of the situation to satisfy the market's demand for sodium hypochlorite. Bottled solutions of sodium hypochlorite were sold under numerous trade names.
Bye Products ::: NEVER use this product as it contains hazardous mixture.
This is bye products of HEAVY / Metal industries. During treatment of main products, huge quantities of SOD. HYPO Chlorite produce, with mixture of many unwanted toxic impurities . This is completely waste of the plant , but sold by traders to satisfy market demands.
Product Code: RXSOL-15-1735-005
Product Code: RXSOL-40-4050-025
Product Code: RXSOL-60-6604-201
Product Code: RXSOL-60-6604-200
Product Code: RXSOL-60-6604-202
Product Code: RXSOL-60-6604-005
| Physical state at 20 °C : | Solid |
| Odour : | Odorless |
| Odour threshold : | No data available. |
| pH value : | Not applicable |
| Melting point [°C] : | 248 - 255 °C |
| Decomposition point [°C] : | N/A |
| Critical temperature [°C] : | N/A |
| Auto-ignition temperature [°C] : | N/A |
| Flammability (solid, gas) : | N/A |
| Flash point [°C] : | 150°C |
| Boiling point [°C] : | 2600C |
| Initial boiling point [°C] : | N/A |
| Final boiling point [°C] : | N/A |
| Evaporation rate : | N/A |
| Vapour pressure [20°C] : | N/A |
| Vapour pressure mm/Hg : | N/A |
| Vapour density : | N/A |
| Density [g/cm3] : | N/A |
| Relative density, gas (air=1) : | N/A |
| Relative density, liquid (water=1) : | N/A |
| Solubility in water [% weight] : | Patially soluble in |
| Solubility in water : | N/A |
| Log Pow octanol / | No data available. |
| water at 20°C : | N/A |
| Solubility : | N/A |
| Viscosity at 40°C [mm2/s] : | N/A |
| Explosive properties : | N/A |
| Explosion limits - upper [%] : | N/A |
| Explosion limits - lower [%] : | N/A |
| Oxidising properties : | No data available |
Product Code: RXSOL-60-6600-201
Product Code: RXSOL-21-2148-008
STORAGE:
When storing a sump pump for any length of time precautions should be taken to prevent corrosion and to maintain the pump in a serviceable condition.
Remove discharge and exhaust hose or pipe and run a pump out of water to blow out all moisture.
Remove the air line and pour a small amount of rust resistant oil in the live air inlet, re-connect hose and idle motor for a few minutes to carry oil to all internal parts.
Remove air hose and plug air inlet and air exhaust post with corks.
Wipe out the pump with rust resisting oil. Wrap pump in oiled paper and pack in covered box.
Store pump in dry place.
Product Code: RXSOL-31-3114-050
| Appearance | White Powder, Granular, |
| Chemical Name | Sodium Dichloroisocyanurate |
| Formula | C3O3N3Cl2Na |
| Chlorine | >62% |
| Molecular Weight | 219.95 |
| pH (1% solution) | 6.0 to 7.0 |
| Moisture | 0.5 to 1.00% max |
| Solubility @ 25°C | Completely soluble in water |
| Density | Tap density = 0.974 g/mL |
The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).
Product Code: RXSOL-60-6503-001
Product Code: RXSOL-60-6565-001
