Your shopping cart is empty.
Product Code: RXSOL-13-1648-005
Product Code: RXSOL-20-2042-210
ph ::: 6.5 - 8
Density ::: 1.01 g/cm3
Flash Point ::: None
Physical State ::: Liquid
Product Code: RXSOL-16-1200-025
PROPERTIES
| Appereance | Clear Blue Liquid |
| pH | Alkaline |
| Boiling Point | 100°C |
| Flash Point | NA |
| Specific Gravity | 1.05-1.115@20°C |
| Solublility in water | 100 % |
| Biodegradable | Yes |
Product Code: RXSOL-15-1640-001
| pH (as is) | 11.5 |
| Density (20°C) | 1.135 g/cc |
| Colour | Clear |
| Fragrance | Odourless |
| Characteristic | Corrosive, Poison |
| Biodegradability | Complete |
| Flash Point | More than 95°C |
| Freezing Stability | Keep out from freezing |
| Degradability determined in accordance with OECD no. 301D. |
Product Code: RXSOL-10-1744-025
A FAST ACTING SPECIALTY SOLVENT ENGINEERED FOR UTILITY USE
· RXSOL-10-1744-025 contains hydrocarbons. If ingested, do not induce vomiting.
· RXSOL-10-1744-025 fumes are non toxic, non narcotic and have a fresh citrus odor. Use in areas having at least normal room ventilation.
· RXSOL-10-1744-025 is minimally irritating if splashed into eyes, Wash, eyes with water for 15 minutes.
· RXSOL-10-1744-025 is combustible under specific conditions not encountered during normal use. Keep away from open flames and ignition sources. Use recommended cleaning procedures.
Product Code: RXSOL-20-2010-210
|
Odour |
Odourless |
|
Appearance |
Liquid, colourless to yellow, soluble in water |
|
pH |
11.5 - 12.5 at 0.1 % concentration, pH 13 - 14 at 100 % concentration |
|
Boiling point |
>100 °C at 760 mm /Hg |
|
Vapour pressure |
Not known |
|
Vapour density |
Not applicable |
|
Freezing point |
5 °C at 760 mm/Hg |
|
Completely soluble in water |
|
|
Specific gravity (water=1) |
1.23 |
FIRST AID MEASURES:
General:
Remove patient from source of contamination. If unconscious, loosen tight clothing and place patient in recovery position. Never give anything to drink to an unconscious person. Ensure open respiration passage. Seek medical attention if in doubt, show label / MSDS.
Inhalation:
Ensure fresh air and rest.
Skin contact:
Contaminated skin should be rinsed with plenty water.
Eye contact:
Immediately flush with plenty of water for at least 15 minutes. Keep eyes open. Seek medical attention/transportation to hospital. Flush during transport.
Ingestion:
Rinse mouth with water, drink plenty of water, or preferably milk. Consult a doctor if necessary.
PROTECTION AGAINST FIRE AND EXPLOSION
Extinguishing media
Extinguish surrounding fires with suitable extinguisher.
Storage:
Store frost-free, preferably at room temperature. Store in closed containers. Keep away from children.
Handling:
Use rubber or plastic gloves.
Special precaution:
Can degrease skin and squirts will irritate the eyes.
Product Code: RXSOL-41-4126-005
Product Code: RXSOL-61-2155-001
Product Code: RXSOL-15-1521-005
Carpet shamoo and cleaner remove dirt and restore a carpet to its original texture. No need for had scrubbing because the dirt is lifted to the surface automatically where it can be brushed or vaccumed clean.
Product Code: RXSOL-41-4122-010
Product Code: RXSOL-19-1182-230
| PRODUCT NAME | : | ETHYLENEGLYCOL |
| CAS number | : | 107-21-1 |
| UN number | : | |
| Formula | : | CH2OHCH2OH |
| Odour | : | ODOURLESS |
| Solubility in water | : | COMPLETE |
| Density | : | 1.115 at 20 oC |
| Boiling point | : | 197 oC |
| Melting point | : | -13 oC |
| Viscosity | : | >18 CP |
| Flashpoint | : | 116 oC |
| Explosive limits | : | 3.2 – 28 Vol% |
| Vapour pressure | : | .07 mbar at 20 oC |
| Skin absorption/irritation | : | YES |
| TLV Country NL Year 1995 | : | 10 ppm 26 mg/m3 |
| Pollution category 1994 | : | D |
Product Code: RXSOL-19-2032-210
Buffer Cleaner PRODUCT CHARACTERISTICS:
1. Appearance : Clear Liquid
2. Specific gravity: 1.0
3. Flash Point : None
4. pH-value at 20 C : 5.5
Recommended DOSAGE
Spraying 10 % in freshwater
Recirculation 10 % in freshwater
The ordinary cleaning method with a synthetic soap takes a long time and is insufficient in removing the described contaminants. A week acid solution in combination with synthetic soap gives a much better cleaning result.
BUFFER CLEAN is used as a final cleaning procedure when the cargo tanks have to be completely free of lead, chlorides, sulphides or MTBE prior to loading of special high purity cargoes.
