BROMINE WATER
- Part number
- RXSOL-60-6604-095
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Image result for bromine water In addition, bromine water is commonly used to test for the presence of an alkene which contains a double covalent bond, reacting with the bromine water,
changing its color from an intense yellow to a colorless solution.
Bromine water is also commonly used to check for the presence of an aldehyde group in compounds.
Applications
Bromine is used in many areas such as agricultural chemicals, dyestuffs, insecticides,
pharmaceuticals and chemical intermediates. Some uses are being phased out for environmental reasons, but new uses continue to be found. Bromine compounds can be used as flame retardants
Dosage and directions
alkyne have one or more triple bond between them. when react with bromine water the bromine breaks into bonds
with water molecules and forms bond with alkyne so the alkyne can replace triple bond with double bond .
Characteristics and notes
Bromine water is an oxidizing, intense yellow-to-red mixture containing diatomic bromine (Br2) dissolved in water (H2O).
Bromine water is also commonly used to check for the presence of an aldehyde group in compounds.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
||
| Product Type | BROMINE WATER | ||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation
Substance name Contents CAS No
Water 98.7 % 7732-18-5
Bromine 1.3 % 7726-95-6
Substance.
Contains no other components or impurities which will influence the classification of the
product
3.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Inhalation (Category 4), H332
Skin irritation (Category 2), H315
Serious eye damage (Category 1), H318
Acute aquatic toxicity (Category 1), H400
For the full text of the H-Statements mentioned in this Section, see Section 16
3.2 Label elements
Labelling (EC) No 1272/2008
Symbol(s): C : Corrosive
N : Dangerous for the environment
R Phrase(s): R26: Very toxic by inhalation.
R35 : Cause severe burns.
R50 : Very toxic to aquatic organisms.
S Phrase(s) : S7: Keep container tightly closed.
S9 : keep container in a well ventilated place.
S26 : In the case of contact with eyes, rinse immediately with plenty of water and seek
medical advise.
S45: In case of accident or if you feel unwell, seek medical advice immediately (show the
label where possible).
S61 : avoid release to the environment . refer to special instruction/safety data sheets.
Hazard pictograms
Signal words : Danger
Hazard statement(s): H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H400 Very toxic to aquatic life.
Precautionary statement(s): P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/
spray.
P280 Wear eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately
call a POISON CENTER/doctor. Supplemental Hazard Statements None
3.3 Other hazards
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see
section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Hydrogen bromide gas
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information No data available
6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Discharge into the environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in
suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage. Store in cool
place.
Recommended storage temperature 15 - 25 °C
Storage class (TRGS 510): 12: Non Combustible Liquids
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
8.1 Control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and at the end of workday.
Personal protective equipment
Eye/face protection : Tightly fitting safety goggles. Faceshield (8-inch minimum). Use
equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection : Handle with gloves. Gloves must be inspected prior to use. Use proper
glove removal technique (without touching glove's outer surface) to avoid skin contact
with this product. Dispose of contaminated gloves after use in accordance with applicable
laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive
89/686/EEC and the standard EN 374 derived from it.
Body Protection L: Complete suit protecting against chemicals, The type of protective
equipment must be selected according to the concentration and amount of the dangerous
substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face
respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator
cartridges as a backup to engineering controls.
9.1 Information on basic physical and chemical properties
Odour Threshold: No data available
pH : No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: No data available
Flash point : No data available
Evaporation rate: No data available
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits: No data available
Vapour pressure: No data available
Vapour density: No data available
Relative density :1,04 g/cm3
Water solubility: No data available
Partition coefficient noctanol/water: No data available
Auto-ignition temperature: No data available
Decomposition temperature : No data available
Viscosity: No data available
Explosive properties: No data available
Oxidizing properties : No data available
9.2 Other safety information
No data available
10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
No data available
10.4 Conditions to avoid
No data available
10.5 Incompatible materials
Strong oxidizing agents
10.6 Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Hydrogen bromide
gas Other decomposition products - No data available
In the event of fire: see section 5
11.1 Information on toxicological effects
Acute toxicity
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is
identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have
not been thoroughly investigated.
12.1 Toxicity
No data available
12.2 Persistence and degradability
No data available
12.3 Bioaccumulative potential
No data available
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at
levels of 0.1% or higher.
12.6 Other adverse effects
Very toxic to aquatic life.
13.1 Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Waste
material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as
other national and local regulations. Leave chemicals in original containers. No
mixing with other waste. Handle uncleaned containers like the product itself.
Contaminated packaging :Dispose of as unused product.
14.1 UN number
ADR/RID: 1744 IMDG: 1744 IATA: 1744
14.2 UN proper shipping name
ADR/RID: BROMINE
IMDG: BROMINE
IATA: Bromine
Passenger Aircraft: Not permitted for transport
Cargo Aircraft: Not permitted for transport
14.3 Transport hazard class(es)
ADR/RID: 8 (6.1) IMDG: 8 (6.1) IATA: 8 (6.1)
14.4 Packaging group
ADR/RID: I IMDG: I IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: noIATA: no
14.6 Special precautions for user
No data available
15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008 DISCLAIMER OF LIABILITY The information in this SDS was
obtained from sources which we believe are reliable. However, the information is
provided without any warranty, express or implied, regarding its correctness. The
conditions or methods of handling,storage, use or disposal of the product are beyond our
control and may be beyond our knowledge. For this and other reasons, we do not assume
responsibility and expressly disclaim liability for loss, damage or expense arising out of
or in any way connected with the handling, storage, use or disposal of the product. This
MSDS was prepared and is to be used only for this product. If the product is used as a
component in another product, this MSDS information may not be applicable.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[BROMINE WATER] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[BROMINE WATER] is available in small packing as well as in bulk. Buy premium quality [BROMINE WATER] and other lab chemicals from one of the most trusted brands.
