Sealant Fungicide

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Non-hazardous:
Pigmented Latex emulsion coating comprised of water, pigments, fillers, additives and latex emulsion resin.

Hazardous:

Chemical Name                    CAS#            Percent             Exposure Limits

3 - Proprietary biocide2          N/A            < 0.10               Not Established

Note: Normal application procedures pose no hazard since titanium dioxide is
wetted and encapsulated, but grinding or sanding dried films of this product may
yield respirable titanium dioxide dust. Control exposures to less than 0.1 mg/m3
using NIOSH-approved dust filter respirators.
Note: Per 29CFR 1910.1200 (g) (2) (1) (C) (2), only hazardous substances
present in excess of 1.0% by weight (or 0.1% for carcinogens) must be listed on
an MSDS.

 Emergency Overview:

Product Description: This product is a pigmented liquid.

Health Hazards:

Eyes: May cause slight irritation.

Skin: Substance may cause slight skin irritation.

Inhalation: May cause irritation of respiratory tract.

Ingestion: Ingestion may cause gastrointestinal irritation, nausea, and vomitting.

Flammability Hazards: This product is not flammable. If this product is involved

in a fire, the decomposition products generated will include irritating vapors and

gases and some carbon monoxide.

Reactivity Hazards: This product is not reactive.

Environmental Hazards: Although release of this product to the environment is

not expected to cause significant adverse effect, all releases should be avoided.

Eyes: Immediately flush eyes with plenty of water for at least 15 minutes and

consult physician.

Skin: Wash skin thoroughly with soap and water. If drenched with product,

remove and wash clothing before reuse.

Ingestion: Ingestion If victim is conscious give 2 glasses of water. Call a

physician.

Inhalation: N/A

Product is non-combustible.

Flash point:                  Autoignition Temperature:
F: Not flammable         F: Not Established 
C: Not Established       C: Not Established

Extinguishing Media:
Use extinguishing media appropriate for surrounding fire

Water Spray                 OK
Carbon Dioxide            OK
Foam                             OK
Dry Chemical               OK
Halon                            OK
Other                            Any “ABC” Class

 Accidental Release Measures:

Personal Precautions: Do not get in eyes. Do not take internally. Avoid skin

contact. Prevent prolonged or repeated breathing of vapor or spray mists. Keep

unnecessary people away. Floor may be slippery, use care to avoid falling.

Ventilate the area. Remove with inert absorbent.

Environmental Precautions: Keep spills and cleaning run-offs out of municipal

sewers and open bodies of water. Comply with local, state and national

regulations.

 

Handling and Storage:

Storage: Store in a cool, dry place

Keep closure tight and containers upright to prevent leakage.

Precautionary labeling: “KEEP FROM FREEZING”.

Precautions:

Use only with adequate ventilation.

Avoid contact with skin and eyes. Avoid breathing vapor and spray mist.

Wash hands after using.

Work Hygienic Practices: Avoid contact with skin. Do not get in eyes. Do not take

internally. Avoid breathing vapors or spray mists.

Ventilation: Use in well-ventilated areas. General exhaust acceptable if the

exposure to materials in Section 2 is maintained below applicable exposure limits.

Refer to OSHA Standards 1910.94, 1910.107, 1910.108.

Respiratory Protection: If personal exposure cannot be controlled below

applicable limits by ventilation, wear a properly fitted organic vapor/particulate

respirator approved by NIOSH/MSHA for protection against materials in Section 2.

When sanding or abrading the dried film, wear a dust/mist respirator approved

by NIOSH/MSHA for dust which may be generated from this product, underlying

paint, or the abrasive.

Eye Protection: Use approved safety eyewear including side shields, chemical

goggles or face shields.

Skin Protection: Wear neoprene or rubber gloves to prevent skin contact if

prolonged skin contact is likely. Wash hands before eating, smoking or using the

wash room.

 

 Stability: Stable

Incompatibility: (Material to Avoid): Avoid contact with strong oxidizing agents

(e.g. nitric acid, permanganates), etc.

Hazardous Decomposition or By-Products: Some carbon monoxide.

Hazardous Polymerization: Will not occur.

 Toxicological Information:

No Data Available

Ecological Information:

No Data Available

Waste Disposal Method:

Waste from this product is not hazardous as defined under the Resource

Conservation and Recovery Act (RCRA) 40 CFR 261. If incinerating, do so

in an approved facility, and do not incinerate closed container. Dispose of in

accordance with Federal, State/Provincial, and Local regulations regarding

pollution.

U.S. Department of Transportation

Proper Shipping Name: Non-Hazardous Water-Based Paint

Hazard Class: “Not Regulated”

Label Statement: “Keep From Freezing”

Class 55 Non-Hazardous Water-Based Paint

Canada (TDG)

Not Regulated for Transportation.

IMO

Not Regulated for Transportation.

U.S. Federal Regulations:

TSCA (TOXIC SUBSTANCE CONTROL ACT): All components of this product are

in compliance with the inventory listing requirements of the U.S. Toxic Substances

Control Act (TSCA) Chemical Substance Inventory.

CERCLA (COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY

ACT): Releases of this material to air, land, or water are not reportable to the

National Response Center under the Comprehensive Environmental Response,

Compensation, and Liability Act (CERCLA) or to state and local emergency planning

committees under the Superfund Amendments and Reauthorization Act (SARA) Title

III Section 304.

SARA TITLE III: No ingredients in this product are subject to SARA 313 (40 CFR

372.65C) Supplier Notification.

CALIFORNIA SAFE DRINKING WATER AND TOXIC ENFORCEMENT ACT

(PROPOSITION 65): Components of this product are on the California Proposition

65 lists.

NOTES: (*)This proprietary biocide is listed as a carcinogen under California

Proposition 65, however, a risk assessment was conducted by the biocide

manufacturer and it was determined that when this product is used in accordance

with label directions, exposure and thus risk is below the level which requires a

Proposition 65 warning.

Titanium Dioxide is subject to the reporting requirements of Section 313 of the

Emergency Planning and Community-Right-To-Know Act of 1986 and of 40 CFR 372.

CANADA DSL: All components are listed or exempt.

 This product has been classified in accordance with the hazard criteria of the
Canadian Controlled Products Regulations (CPR) and the MSDS contains all of the
information required by the CPR.
To comply with New Jersey DOH Right-To-Know labeling law (NJAC 8:59 – 5.1 & 5.2)

CAS. No.:          CHEMICAL INGREDIENTS
 

7732-18-5                  Water

12174-11-7               Magnesium aluminum silicate

25265-77-4 2,2,4 -   Trimethyl - 1, 3 - pentenediol

                                monoisobutyrate

57-55-6                    Propylene glycol

Not Available +        Latex resin solids

                               (+) Contents Partially Unknown

                   HMIS HAZARD RATING
Health 1    Flammability 0    Physical Hazard 0    Personal
                                                   Protection A
HAZARD INDEX: 0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe
                   PERSONAL PROTECTION CODE:
A=Safety glasses

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.