Nutrient Solution TSP
- Part number
- RXSOL-34-1522-055
- Category
- RIGS Oil Field
- Brand
- RXSOL
Overview
Manufacturer supplier and exporter of Nutrient Solution TSP Trisodium Phosphate which is used as nutrition enlargement agent and sequestrant (metal-chelating agent). Used for softening hard water and also Helps in removing soils and keeping soil from re-depositing.
Technical specifications
|
Technical Parameter |
Unit |
Specification |
|
Apperance |
Clear slightly yellowish liquid | |
| Concentration of the supplied product | TSP 10% (w/w) | |
| Dilution | % | Not required |
| Dosage | ||
| WWTP | Approx 1.12 lit/kg BOD to be added | |
| Quantity (Initial Charges +Annual consumption +15% spare Charges+ 1%spillage etc) | 243.7 m3 | |
| Physical Properties | ||
| Colour | Almost Colourless | |
| Odour | Light ammoniated odour | |
| pH (Concentrated product) | Alkaline Powder | |
| pH (aqueous solution) | 10.0-10.5 (10 g/lit) | |
| Boiling point/range | Degree C | 100 |
| Flash Point(Pensky / Martens) | Degree C | Non |
| Density at 20*C | kg/m3 | 1.1 g/cm3 |
| Solubility in water | % weight | Highly soluble |
| segregation coefficient (Pow) | -2 log | |
| Viscosity at 20*C | mPas | 5-10 cps |
| Vapour Pressure at 20*C | kg/cm2 | 20 hPA |
| Vapour density | Not Applicable | |
| Decomposition | Degree C | over 130 |
| Freeze point | Degree C | -5 |
| Ignition Temperature | Degree C | Non Flammable |
| Chemicals Properties | ||
| Evaporation result | % | Anhydrous Trisodium Phosphate (TSP) 10-20% |
Applications
Sodium Phosphate Tribasic TSP based Nutrient Solution is also used to clean up all the mineral spirits.
Dosage and directions
Nutrient Solution TSP treatment chemical for calcium precipitation, Sodium Phosphate Tribasic is also used to clean polyester filter elements.
Characteristics and notes
RXSOL is Trisodium phosphate Manufacturers in INDIA, and RXSOL team also work as trisodium phosphate Suppliers in Mumbai, Navi Mumbai, Surat, Kandla, Gandhidham, Visakhapatnam, Ennore, Chennai, Kolkata, Ennore, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Middle East and entire Gulf region. RXSOL group also listed in top 10 Trisodium phosphate Exporters.
Synonym (s)...................……………...Sodium orthophosphate dodecahydrate
RXSOL group have major stock point at following location :::
Suppliers in Chennai Suppliers in Mumbai Suppliers in Kolkata Suppliers in Dubai Supplier in Fujairah Supplier in Visakhapatnam
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Nutrient Solution TSP |
| HS CODE | 28352300 |
| Product Code | RXSOL-34-1522-055 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
|
Chemical Name |
Percent |
Value |
Cas No |
|
TSP ( Anhydorus Tri Sodium Phosphate ) |
% |
10-20 |
|
| Urea | % | 5-10 | 57-13-6 |
| De-Ionized Water | % | 80-85 | 7732-18-5 |
Synonym (s)...................……………...Sodium orthophosphate dodecahydrate
|
Potential Health Effects:- |
|
|
Inhalation |
Material is irritating to mucous membranes and upper respiratory tract. Exposure can cause coughing, chest pains and difficulty breathing. |
|
Ingestion |
May cause burns of the mouth, throat and stomach. Aspiration into the lungs may occur during ingestion or vomiting, resulting in lung injury. Symptoms may include bleeding, vomiting diarrhoea, fall in blood pressure. Damage may appear days after exposure. |
|
Skin Contact |
Material is irritating to mucous membranes and upper respiratory tract. Exposure can cause coughing, chest pains and difficulty breathing. |
|
Eye Contact |
May cause eye burns. May cause permanent corneal injury. May cause severe eye irritation. Corrosive! Causes irritation of eyes, and with greater exposures, it can cause burns that may result in permanent impairment of vision, even blindness. |
|
Inhalation |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician. |
|
Ingestion |
Do Not Induce Vomiting! Give large quantities of water or milk if available. Never give anything by mouth to an unconscious person. Get medical attention immediately. |
|
Skin Contact |
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Call a physician, immediately. Wash clothing before reuse. |
|
Eye Contact |
Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately. |
|
Fire |
Not considered to be a fire hazard. The hot or molten material can react violently with water. Can react with certain metals, such as aluminium, to generate flammable hydrogen gas. |
|
Explosion |
Not considered to be an explosion hazard. |
|
Fire Extinguishing Media |
Use any means suitable for extinguishing surrounding fire. Adding water to caustic solution generates large amounts of heat. |
Pick up and place in a suitable container for reclamation or disposal, using a method that does not generate dust. Residues from spills can be diluted with water, neutralized with a dilute acid such as acetic, hydrochloric or sulfuric. Absorb neutralized caustic residue on clay, vermiculite or other inert substance and package in a suitable container for disposal.
Keep in a tightly closed container. Protect from physical damage. Store in a cool, dry, ventilated area away from sources of heat, moisture and incompatibilities. Always add the caustic to water while stirring; never the reverse. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Do not store with aluminum or magnesium. Do not mix with acids or organic materials.
|
Airborne Exposure Limits |
OSHA |
|
OSHA Permissible Exposure Limit (PEL) |
2 mg/m3 Ceiling – ACGIH |
|
Threshold Limit Value (TLV) |
2 mg/m3 Ceiling |
|
Ventilation System |
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details. |
|
Personal Respirators |
If the exposure limit is exceeded, a half-face dust/mist respirator may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece dust/mist respirator may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. |
|
WARNING |
Air-purifying respirators do not protect workers in oxygen-deficient atmospheres. |
|
Skin Protection |
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. |
|
Eye Protection |
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area. |
|
Technical Parameter |
Unit |
Specification |
|
Apperance |
Clear slightly yellowish liquid | |
| Concentration of the supplied product | TSP 10% (w/w) | |
| Dilution | % | Not required |
| Dosage | ||
| WWTP | Approx 1.12 lit/kg BOD to be added | |
| Quantity (Initial Charges +Annual consumption +15% spare Charges+ 1%spillage etc) | 243.7 m3 | |
| Physical Properties | ||
| Colour | Almost Colourless | |
| Odour | Light ammoniated odour | |
| pH (Concentrated product) | Alkaline | |
| pH (aqueous solution) | 10.0-10.5 (10 g/lit) | |
| Boiling point/range | Degree C | 100 |
| Flash Point(Pensky / Martens) | Degree C | Non |
| Density at 20*C | kg/m3 | 1.1 g/cm3 |
| Solubility in water | % weight | Highly soluble |
| segregation coefficient (Pow) | -2 log | |
| Viscosity at 20*C | mPas | 5-10 cps |
| Vapour Pressure at 20*C | kg/cm2 | 20 hPA |
| Vapour density | Not Applicable | |
| Decomposition | Degree C | over 130 |
| Freeze point | Degree C | -5 |
| Ignition Temperature | Degree C | Non Flammable |
| Chemicals Properties | ||
| Evaporation result | % | Anhydrous Trisodium Phosphate (TSP) 10-20% |
|
Stability |
Stable under ordinary conditions of use and storage. Very hygroscopic. Can slowly pick up moisture from the air and react with carbon dioxide from air to form sodium carbonate. |
|
Hazardous Decomposition Products |
Decomposition by reaction with certain metals releases hydrogen gas. |
|
Hazardous Polymerization |
Will not occur. |
|
Incompatibilities |
Contact with nitromethane and other similar nitro compounds causes the formation of shock-sensitive salts. Contact with metals such as aluminium, tin, and zinc causes the formation of flammable hydrogen gas. |
|
Conditions to Avoid |
Moisture, dusting and incompatible. |
|
Skin Irritation |
Irritant wash with soapy water |
|
Eye Irritant |
Moderate irritant, flush with copious amounts of water |
|
Sensitization |
Not Sensitizing. |
(All above information as per data available with us)
|
Comment |
Not applicable |
|
Ecotoxicity |
Fish Toxicity..................……………... EC50(96hr, Mosquitofish): 151mg/L Biodegradability.............……….….... The resulting phosphate |
| Environmental Effects | Not available |
|
Do not allow the product to reach drinking water soil. |
|
This material must be disposed with local national regulations. Product Recommendation ( Recommended cleaning agent: water ) Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations.Can be reused or recycled after cleaning .
- Transport/Additional information
Land transport ADR/RID (cross-border)
ADR/RID class: -
Maritime transport IMDG:
IMDG Class: - Marine pollutant: No
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: - TDG
• Irritating to eyes and skin.
• Safety phrases
2 Keep out reach of children
If swallowed, seek medical attention immediately
22 Harmful if swallowed
26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention.
27 After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
• National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Department issuing data specification sheet Environment protection department. Note: No Environmental Problems Are Expected If The Product Is Handled Correctly.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Nutrient Solution TSP manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Nutrient Solution TSP at a competitive price from us. We have ready stock of Nutrient Solution TSP in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
