Acid Slurry LABSA Synthetic Detergent 5 Kg

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Harmful if swallowed. Causes burns.
ADVERSE HUMAN HEALTH EFFECTS: The product is a corrosive substance. Contact With the eye may cause ocular lesions and Contact with wet skin may cause burns. It is seriously irritating to the mucous if swallowed. The product is harmful if ingested.
ENVIRONMENTAL EFFECTS: The product is not classified as dangerous to the environment. The user is advised to use anyway good work practice an to avoid contamination of the environment.
OTHER EFFECTS: The product is a strong acid which reacts exothermically with bases. Dilution with water produces heat.

INHALATION: The product is not volatile. If under particular conditions such as in the case of fire, fumes or Aerosols are inhaled, remove the patient to a well-ventilated location and call a physician. 
ANNOTATIONS TO A PHYSICIAN: The product is a high foaming anionic surfactant. If gastric lavage is necessary, then use silicon antifoam (dimethicone).

GENERAL INFORMATION: The product poses little risk of ignition. If it happens to be involved in a fire, keep the tank cooled by means of a water spray in order to avoid decomposition of the product. SUITABLE EXTINGUISHING: Water spray, foam, carbon dioxide. MEDIA
NOT SUITABLE EXTINGUISHING: None in particular. MEDIA
 SPECIFIC HAZARDS: Combustion produces carbon dioxide, carbon monoxide and oxides of Sulphur. When heated to decomposition, toxic fumes of SO2 and SO3 are emitted.
SPECIAL EQUIPMENTS : For large fires, wear self-contained breathing apparatus.

HANDLING: Avoid contact with the product. While handling the product, wear a protective apron, rubber or PVC gloves and a face shield. Handle the product in well-ventilated areas. Neutralize with the base under controlled conditions. Compatible materials are Stainless Steel, Mild Steel, and Plastic Materials. Incompatible with galvanised steel, aluminium and copper alloys.

PRECAUTIONARY MEASURES: Installation of an eyewash fountain is recommended. Do not eat, drink onto the workplace. When handling the product use approved protective clothing, rubber or PVC gloves, and a face shield.

PERSONAL PROTECTIVE: Wear safety goggles or a face shield and approved EQUIPMENT protective clothing.
THRESHOLD LIMIT VALUE: Not established.
REQUIREMENTS FOR PERIODIC: Specific measures are not foreseen. HEALTH 

Appearance: Brown, viscous liquid with a penetrating odour.
Viscosity at 60°C ca. 200 cps.
Viscosity at 20°C ca. 1500 – 2000 MPa.s.
S.G. at 20°C 1.07 g/ml  ( MASS DENSITY )
Mol. Weight 322 +2
Neutralization # 179 mg KOH/g sulphonic acid
Flash point (°C) >90° (DIN 51758)
pH (1% solution) ca. 1.5 to 2
ODOUR: Of Sulphur.
NOMINAL ACTIVE MATTER CONC. : ~ 90% m/m.
AVEREAGE MOLECULAR MASS: ~ 326
SOLUBILITY AT 20 DEGREE C - Water : Soluble - Ethanol: Soluble - Acetone: Not Compatible - Aliphatic Hydrocarbons: Insoluble
MELTING RANGE: ~ -10 DEGREE C.
BOILING POINT: ~ 315 DEGREE C.
VAPOUR PRESSURE AT 20 C : BELOW 0.15 (0.001 mm Hg)
VAPOUR DENSITY (Air = 1) : Not Applicable to this Product.
FLASHPOINT (PMcc) : 210 DEGREE C.
AUTOIGNITION TEMPERATURE: Not Applicable to this product.
DECOMPOSITION TEMPERATURE : > 100 DEGREE C.
EXPLOSION PROPERTIES: Not pertinent to this product.
OXIDIZING PROPERTIES: Not pertinent to this product.

HAZARDOUS DECOMPOSTION PRODUCTS: In case of overheating, sulphur oxides can be emitted.
CONDITIONS TO AVOID : Do not heat above 90 degree centigrade.
MATERIALS TO AVOID : Neutralization with bases under uncontrolled conditions.
INTENDED USE AND TRANSFORMATION : The product may be neutralized under controlled conditions with the appropriate base to produce the corresponding salt.

POSSIBLE ROUTES OF PENETRATION : Ingestion and contact.

INGESTION : Corrosive substance, harmful for ingestion. Oral acute LD50 : > 500 – 2000 mg/kg.
EYE CONTACT : Severe eye irritant. It may cause irreversible damage to the eyes.
SKIN CONTACT : Contact may cause ulcerations.
SENSITIZATION : Not Sensitizing.
INHALATION : Inhalation is possible only as an aerosol. Strong irritant to respiratory

ENVIRONMENTAL DISTRIBUTION : Water is likely to be the main transport medium for the chemical, to estimate its possible environmental distribution.
PRIMARY BIODEGRADABILITY : > 90% (OECD screening test (sodium salt)). The surfactant fulfils the requisite minimum requirements of primary biodegradability.
ABIOTIC DEGRADABILITY : Not available.
ECOTOXITY : 2.49 mg O2/mg.
CHEMICAL OXYGEN DEMAND (COD) : Not available.
LOG P o/w : Not applicable, surface active substance.
BCF : Insufficient available information.

Dispose of product in authorised places / methods in observance with the current laws. It may be treated in a biological waste treatment plant.

UN CLASSIFICATION NUMBER: 2586
NAME OF THE DELIVERING PRODUCT: Linear Alkyl Benzene Sulphonic Acid/LABSA90%
PACKING INSTRUCTION: P001
PACKAGING GROUP: III
CLASS: 8
MARINE POLLUTANT: NO
EMS NUMBER: F-A, S-B
 

15. REGULATORY INFORMATION

RISK PHRASES
R22 - Harmful if Swallowed
R34 - Causes Burns
SAFETY ADVICE
S26 - In case of contact with the eyes, rinse immediately with plenty of water and seek medical help. S28 - After contact with skin, wash immediately with plenty of water
S36/37/39 - Wear suitable protective clothing, gloves and eye face protection.

The information contained in this MSDS sheet is based on the available knowledge at the time of compilation, RX MARINE INTERNATIONAL  no responsibility for applications that are incorrect or improper or not in accordance with the information reported above. For any application outside normal foreseen, it is advisable to ask information from RX MARINE International. The data provided herein do not constitute specifications of quality. This MSDS cancels and replaces any preceding release.