RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Coolant Glycol Antifreeze

DIPROPYLENE GLYCOL

Part number
RXSOL-19-1155-050
Brand
RXSOL
DIPROPYLENE GLYCOL

Overview

Dipropylene glycol supplier and exporter. Di propylene glycol used as a plasticizer, and also used in intermediate chemical reactions.

Applications

PRODUCT NAME     : DIPROPYLENEGLYCOL
CAS number  : 25265-71-8
UN number :  
Formula  : (CH3CHOHCH2)2O
Odour   : ODOURLESS
Solubility in water      : COMPLETE
Density   : 1.025   at 20   oC
Boiling point   : 233oC
Melting point  : <-20oC
Viscosity    : 107 cp at 20 oC
Flashpoint    : 138 oC
Explosive limits   : 2.9 – 12.6 Vol%
Vapour pressure   : .01 mbar at 20 oC
Skin absorption/irritation   : YES
TLV       Country   :  
Pollution category        :  III

Dosage and directions

Dipropylene glycol also used in chemicals reaction as a polymerization initiator or monomer.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name RXSOL-19-1155
Product Type   DIPROPYLENE GLYCOL

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK Point : Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam, Fujairah

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmarine.com

Chemical Name

CAS Number

EC Number

Oxydipropanol

25265-71-8

246-770-3

Hazard description: Not applicable.
Information concerning particular hazards for human and environment: Not applicable.

General information No special measures required.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.

After swallowing

If symptoms persist consult doctor.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: Mouth respiratory protective device.

Person-related safety precautions: Not required.
Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: No special requirement
Additional information: No dangerous substances are released. No dangerous substances are released.

Handling:
Information for safe handling:
Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
No special requirement
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace: Not required.

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures: The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection:Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection:Not required

General Information

Form

Fluid

Colour

Colourless

Odour

Characteristic

Change in condition

Melting point/Melting range

Undetermined.

Boiling point/Boiling range

Undetermined.

Flash point

Not applicable.

Danger of explosion

Product does not present an explosion hazard.

Density at 20°C Not determined.
Solubility in / Miscibility with water at 20°C Soluble g/l g/l

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.
Additional toxicological information: When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.
The substance is not subject to classification according to the latest version of the EU lists.

General notes: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Product:
Recommendation Smaller quantities can be disposed of with household waste.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.

• Land transport ADR/RID (cross-border)
• ADR/RID class: -
• Maritime transport IMDG:
• Marine pollutant: No

Labelling according to EU guidelines:
Observe the general safety regulations when handling chemicals.
The substance is not subject to classification according to EU lists and other sources of literature known to us.

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

DIPROPYLENE GLYCOL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of DIPROPYLENE GLYCOL at a competitive price from us. We have ready stock of DIPROPYLENE GLYCOL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches