Floor Care (Polish / Cleaner )
Floor Polish 5 Ltr
- Part number
- RXSOL-13-1015-005
- Category
- Floor Care (Polish / Cleaner )
- Brand
- RXSOL
Overview
Rxsol Floor Polish is a advance and new generation polish which gives a long lasting gloss finish. Rxsol Floor Polish not only protects and extends the life of floorsbut also provides a safe high gloss finish which is easy to maintain and resistant to scuffing.
| Floor will lose its natural beauty from exposure to sunlight, dirt buildup and cleaning with abrasive chemicals. To prevent damage, treat your FLOOR RXSOL-13-1015-010 |
- Cleans and Shines Wood to a Deep Luster.
- Quick and Easy to Use with No Rubbing or Buffing.
- Protects Against Sun Damage, Stains, Drying and Cracking.
Applications
Use Instructions
Ensure old polish is removed.
Apply only to a clean dry floor
Post wet floor signs
Using a clean mop or applicator, charge with product and tamp down in a wringer, but do not wring out, the mop or applicator should be saturated but not dripping.
Apply to the floor using overlapping figure of 8 motion. On the first coat leave a 6 inch gap along the edges.
Allow 20 to 30 minutes drying time. Ensure 1st coat is completely dry before applying a second coat, at right angles to the first coat appling product up to the edges. If required apply a 3rd coat in a similar manner.
Some floors such as stone, or worn porous/vinyl will require sealing , do the accordingly.
Regularly maintain the floor by damp mopping, machine scrubbing or spray cleaning. The ideal maintenance product for Rxsol Floor Polis is Rxsool Floor Stripper.
Properties :
Appearance : Clear Transparent liquid
Odour : Characteristic
Density : 1.03 g/cm3
Dosage and directions
Easy-to-use spray is perfect for a clean shine on wood furniture that gets regular use. The spray dispenses a larger amount of the active protectant for a deep shine, which will protect against damage from sunlight, stains, drying, cracking and everyday wear and tear.
Directions
- SHAKE WELL.
- Hold bottle 6 inches from surface and spray over the entire area.
- Wipe immediately along the grain with a clean, soft cloth, turning occasionally.
- For small items and hard-to-reach surfaces, spray product directly onto cloth and wipe.
- Heavily soiled surfaces should be cleaned prior to using polish.
OTHERWISE
Using a clean mop or applicator, charge with product and tamp down in a wringer, but do not wring out, the mop or applicator should be saturated but not dripping.
Apply to the floor using overlapping figure of 8 motion. On the first coat leave a 6 inch gap along the edges.
Allow 20 to 30 minutes drying time. Ensure 1st coat is completely dry before applying a second coat, at right angles to the first coat appling product up to the edges. If required apply a 3rd coat in a similar manner.
Some floors such as stone, or worn porous/vinyl will require sealing do the accordingly.
Regularly maintain the floor by damp mopping, machine scrubbing or spray cleaning. The ideal maintenance product for Rxsol Floor Polish is Floor Stripper.
Characteristics and notes
Benefits
Produces a hard wearing durable floor polish
Acts as a sacrificial wear layer for resilient and hard floor coverings
Good level of gloss
Excellent resistance to scuffs and marks
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-13-1015-005 |
| Product Type | Floor Polish-I |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com , sales@tankcleaner.net/ | |
| Website | www.rxmarine.com/ , www.tankcleaner.net/ |
|
Principle Hazardous Component(s) (chemical and common name(s)) |
(Cas. No) | % | OSHA PEL mg/m3 | ACGIH TLV mg/m3 | NTP | IARC | OSHA regulated |
| Sodium Metasilicate Pentahydrate | (6834-92-0) | <85% | 5 | 10 | No | No | No |
| Emergency overview | |
| Appearance | White powder |
| Immediate effects | Caustic, irritating to skin and mucous membranes. Ingestion causes GI upset. Potential health effects |
| Primary Routes of entry | Inhalation, skin and eye contact. |
| Signs and Symptoms of Overexposure | The dust can cause tissue damage, especially to eyes and lungs. |
| Eyes | May cause eye irritations or damage. |
| Skin | May cause skin irritation. |
| Ingestion | Causes GI upset. |
| Inhalation | May cause irritations or tissue damage to throat and lungs. |
| Chronic Exposure | ND |
| Chemical Listed As Carcinogen Or Potential Carcinogen | No |
See Toxicological Information (Section11) Potential environmental effects See Ecological Information (Section 12)
If accidental overexposure is suspected:-
| Eye(s) Contact | Flush eyes immediately with water for at least 15 minutes.Get medical attention. |
| Skin Contact | Flush immediately with water for at least 15 minutes. Was clothes before reuse. |
| Inhalation | Remove victim to fresh air. Administer oxygen if breathing is difficult. |
| Ingestion | See medical attention. |
|
Note to physician |
|
| Treatment | ND |
| Medical Conditions generally Aggravated by Exposure | ND |
| Flash Point | None |
| Flammable Limits | None |
| Auto-ignition point | ND |
| Fire Extinguishing Media | None |
| Special Fire Fighting Procedures | None |
| Unusual Fire and Explosion Hazards | None |
| Hazardous combustion products | Carbon monoxide and dioxide when burned |
| DOT Class | None |
Steps to be Taken in Case Material is Released or Spilled : Clean up solids. Remnants may be neutralized with weak acid and absorbed for disposal.
Waste Disposal Methods : Dispose of waste according to Federal, State and Local Regulations.
| Precautions to be Taken in Handling and Storage | Store away from high heat, avoid skin contact |
| Storage temperature | Room temperature. |
| Storage Pressure | NA |
|
Engineering Controls |
|
| Ventilation required | Local exhaust. |
|
Personal Protection Equipment |
|
| Respiratory protection | Wear dust mask |
| Protective gloves | Rubber or latex. |
| Skin protection | Wear gloves |
| Eye protection | Safety glasses or face shield. |
| Additional clothing and/or equipment | None needed. |
| Exposure Guidelines |
See Composition/Information on Ingredients (Section2) |
| Appearance and Physical State | White powder. |
| Odor (threshold) | Mild odor. |
| Specific Gravity (H2O=1) | 1 |
| Vapor Pressure (mm Hg) | Nil |
| Vapor Density (air=1) | NA |
| Percent Volatile by volume | Nil |
| Evaporation Rate (butyl acetate=1) | NA |
| Boiling Point | NA |
| Freezing point / melting point | NA |
| pH | NA |
| Solubility in Water | NA |
| Molecular Weight | NA |
| Stability | Stable |
| Conditions to Avoid | None |
| Materials to Avoid (Incompatibility) | Strong acids. |
| Hazardous Decomposition Products | Carbon monoxide and dioxide. |
| Hazardous Polymerization |
Results of component toxicity test performed: Sodium Metasilicate Pentahydrate (6834-92-0) anhydrous material. Rat (oral) LD50: 1153 mg/Kg. Standard Draize, Skin human, 250 mg/24-hour, severe. Investigated as reproductive effectors.
Human experience: ND for product. This product does not contain any compounds listed by NTP or IARC or regulated by OSHA as a carcinogen.
| Ecological Information | ND |
| Chemical Fate Information | ND |
RCRA 40 CFR 261 Classification: Federal, State and local laws governing disposal of materials can differ. Ensure proper disposal compliance with proper authorities before disposal.
| US DOT Information | |
| Proper shipping name | Corrosive solid, basic, inorganic, n.o.s. (contains Sodium Metasilicate) |
| Hazard Class | 8 |
| Packaging group | III |
| UN Number | UN3262 |
| Limitations | See 49CFR173.154(B)(2)(c). |
| Ground | ORM-D |
| IATA | |
| Proper shipping name | Corrosive solid, basic, inorganic, n.o.s. (contains Sodium Metasilicate) |
| Hazard Class | 8 |
| Packaging group | III |
| UN Number | UN3262 |
| Limitations | See current IATA regulations |
| IMO | |
| Proper shipping name | Corrosive solid, basic, inorganic, n.o.s. (contains Sodium Metasilicate) |
| Canadian TDG | ND |
United States Federal Regulations MSDS complies with OSHA’s Hazard Communication Rule 29, CFR 1910.1200.
| SARA | None listed |
| SARA Title III | None listed |
| RCRA | None listed |
| TSCA | Sodium Metasilicate Pentahydrate (6834-92-0). Listed |
|
State Regulations |
|
| CERCLA | None listed. |
| California Proposition 65 | None listed |
| International Regulations | |
| Canada WHMIS | Sodium Metasilicate Pentahydrate (6834-92-0). Listed |
| Europe EINECS Numbers | ND |
Label Information : Caustic, irritating to eye, skin and mucous membranes.
European Risk and Safety Phrases : ND
European symbols needed : ND
Canadian WHMIS Symbols :
NFPA Hazard Rating: Health : 1; Fire : 0; Reactivity : 1
(0=least, 1=Slight, 2=Moderate, 3=High, 4=Extreme)
Abbreviations used in this document
NE= Not established
NA= Not applicable
NIF= No Information Found
ND= No Data
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Floor Polish manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Floor Polish at a competitive price from us. We have ready stock of Floor Polish in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
