Inhibitor Killer
- Part number
- RXSOL-11-1101-025
- Category
- Tank Cleaner
- Brand
- RXSOL
Overview
Presence of Lead content in petroleum product contaminent tank for next voyage, RXsol Lead Cleaner / Inhibitor Remover is a speacial and concentrated clear organic, Surfactant basis liquid compound which is very effective to clean and upgrade cargo tanks that have carried leaded gasoline, carbon tetrachloride and virgin naphtha.
Rxsol Lead Cleaner/Inhibitor Remover contains hydrocarbon acids, which has an excellent property to bind lead-ions and keep them in solutions.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-20-2038-210 |
| Product Type | LEAD CLEANER / INHIBITOR REMOVER |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Visakhapatnam, Chennai Ennore, Fujairah, Muscat
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
FattyAlcohol Ethoxylate |
10-15 |
34398-01-1 |
500-084-3 |
41 |
Xi |
|
2-,2(butoxyethoxy)ethanol |
20-30 |
112-34-5 |
203-961-6 |
36 |
Xi |
| Proprietory Blend | 40-60 | ------- | -------- | --- | -- |
*See Section 16
|
Chemical characterization |
|
|
Description |
Mixture of substances listed below with nonhazardous additions. Cleansing agent |
|
Dangerous components |
non-ionic surfactants Xn, Xi; R 22-41 10-25 % CAS: 111-76-2 |
|
Einecs |
203-905-0 2-butoxyethanol Xn, Xi; R 20/21/22-36/38 2.5-10% |
|
General Information |
Immediately remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. |
|
After inhalation |
Supply fresh air; consult doctor in case of complaints. |
|
After skin contact |
Generally the product does not irritate the skin. |
|
After eye contact |
Rinse opened eye for several minutes under running water. Then consult a doctor. |
|
After swallowing |
Call for a doctor immediately |
|
Suitable extinguishing agents |
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. |
|
Protective equipment |
No special measures required. |
|
Person-related safety precautions |
Wear protective clothing. |
|
Measures for environmental protectio |
Dilute with plenty of water. |
|
Do not allow to enter sewers/ surface or ground water. |
|
|
Measures for cleaning/collecting |
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).Dispose contaminated material as waste according to item 13.Ensure adequate ventilation.Dispose Of The Material Collected According To Regulations. |
|
Handling |
|
|
Information for safe handling |
Store in cool, dry place in tightly closed receptacles..Prevent formation of aerosols. |
|
Information about fire- and explosion protection |
No special measures required. |
|
Storage |
|
|
Requirements to be met by storerooms and receptacles |
No special requirements. |
|
Information about storage in one common storage facility |
Not required. |
|
Further information about storage conditions |
None. |
|
Additional information about design of technical facilities: No further data; see item 7. • Ingredients with limit values that require monitoring at the workplace: 111-76-2 2-butoxyethanol WEL Short-term value: 50 ppm Long-term value : 25 ppm • Additional information : The lists valid during the making were used as basis. • Personal protective equipment: • General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. • Respiratory protection : Not required. • Protection of hands : Protective gloves The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. • Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. • Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. • Eye protection : Safety glasses • Body protection : Protective work clothing |
|
General Information |
|
|
Form |
Fluid |
|
Colour |
Clear |
|
Odour |
Characteristic |
|
• Change in condition |
|
|
Melting point/Melting range |
Undetermined. |
|
Boiling point/Boiling range |
171°C |
|
• Ignition temperature |
240°C |
|
• Self-igniting |
Product is not selfigniting. |
|
• Danger of explosion |
Product does not present an explosion hazard. |
|
• Explosion limits |
|
|
Lower |
1.1 Vol % |
|
Upper |
10.6 Vol % |
|
• Vapour pressure at 20°C |
23 hPa |
|
• Density at 20°C |
1.01 g/cm³ |
|
• Solubility in / Miscibility with |
|
|
water |
Fully miscible. |
|
• pH-value at 20°C |
> 7 |
|
Thermal decomposition / conditions to be avoided |
No decomposition if used according to specifications.- |
|
Dangerous reactions No dangerous reactions known. |
|
|
Dangerous decomposition products |
Carbon monoxide and carbon dioxide. |
|
Acute toxicity |
Primary irritant effect: |
|
on the skin |
No irritant effect. |
|
on the eye |
No irritating effect. |
|
Sensitization |
No sensitizing effects known. |
|
Additional toxicological information |
The product shows the following dangers according to the calculation method of the General EU |
|
Classification Guidelines for Preparations as issued in the latest version |
Harmful |
|
General notes |
Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.Do not allow product to reach ground water, water course or sewage system..Danger to drinking water if even small quantities leak into the ground. |
|
Product Recommendation |
Must not be disposed together with household garbage. Do not allow product to reach sewage system. |
|
Uncleaned packaging Recommendation |
Disposal must be made according to official regulations. |
|
Recommended cleansing agents |
Water, if necessary together with cleansing agents. |
• Land transport ADR/RID (cross-border)
• ADR/RID class : -
• Maritime transport IMDG:
• IMDG Class : -
• Marine pollutant : No
• Air transport ICAO -TI and IATA-DGR :
• ICAO/IATA Class : -
|
Labelling according to EU guidelines |
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials. |
|
Code letter and hazard designation of product |
Xn Harmful |
|
Risk phrases |
22 Harmful if swallowed. |
|
Safety phrases |
23 Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer). 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. 60 This material and its container must be disposed of as hazardous waste. |
|
National regulations |
|
|
Waterhazard class |
Water hazard class 2 (Self-assessment): hazardous for water. |
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. • Relevant R-phrases. 20/21/22 Harmful by inhalation, in contact with skin and if swallowed..22 .Harmful if swallowed. 36/38 Irritating to eyes and skin. 41 Risk of serious damage to eyes.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Lead Cleaner Inhibitor Remover manufacturer and supplier in India UAE Middle East. We are most popular tank cleaner Lead Cleaner / Inhibitor Remover supplier in Mumbai, Kandla, Mundra, Jamnagar, Hazira, Visakhapatnam, Chennai, Ennore, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Dubai, Ajman, Abudhabi, Muscat, Oman
