RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Solvent Chemicals

Methyl Acrylate

Methyl acrylate stabilised with hydroquinone monomethyl ether for synthesis
Part number
RXSOL-19-1363-210
Brand
RXSOL
Methyl Acrylate

Overview

Methyl Acrylate stockist and supplier in India, UAE, Nairobi, Oman.

Technical specifications

 PRODUCT NAME        : METHYLACRYLATE
 CAS number     : 96-33-3
 UN number  : 1919
 Formula   : CH2=CHCOOCH3
 Odour   : SHARP PUNGENT
 Solubility in water    : SLIGHT
 Density     : 0.953 at 20 oC
 Boiling point      : 80 oC
 Melting point   : -75oC
 Viscosity   :  
 Flashpoint     :  -4 oC
 Explosive limits     : 2.4 – 18.6 Vol%
 Vapour pressure     : 93 mbar at 20oC
 Skin absorption/irritation       : YES
 TLV       Country  NL              Year  1995  : 5 S ppm                18 S     mg/m3
 Pollution category    1994     : B

Applications

Methyl acrylate (stabilised with hydroquinone monomethyl ether) for synthesis. CAS 96-33-3, EC Number 202-500-6, chemical formula CH₂=CHCOOCH₃.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name RXSOL-19-1363
Product Type   Methyl Acrylate

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

Chemical Name

CAS Number

EC Number

Index number

Methyl Acrylate

96-33-3

202-500-6

607-034-00-0

Hazard description:
Information concerning particular hazards for human and environment:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system and skin.
R 43 May cause sensitisation by skin contact.

General information Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

After inhalation

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

After skin contact

Immediately wash with water and soap and rinse thoroughly.

After eye contact

Rinse opened eye for several minutes under running water.If symptoms persist, consult a doctor.

After swallowing

Call for a doctor immediately.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents: Water with full jet
Protective equipment: Mouth respiratory protective device.

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13. Ensure adequate ventilation

Handling:
Information for safe handling: Ensure good ventilation/exhaustion at the workplace.
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
96-33-3 methyl acrylate

PEL (USA)

REL (USA)

TLV (USA)


35 mg/m³, 10 ppm
Skin
35 mg/m³, 10 ppm
Skin
7 mg/m³, 2 ppm
Skin; SEN

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

General Information

Form

Fluid

Colour

Colourless

Odour

Pungent

Change in condition

Melting point/Melting range

-76.5°C

Boiling point/Boiling range

80.5°C

Flash point

-3°C

Ignition temperature 415°C

Danger of explosion

Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Explosion limits:
Lower 2.4 Vol %
Upper 18.6 Vol %
Vapour pressure at 20°C 89 hPa
Density at 20°C 0.9535 g/cm³
Solubility in / Miscibility with water at 20°C 60 g/l
Viscosity:
Dynamic at 22°C 32 mPas

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Dermal

LD50

LD50

277 mg/kg (rat)

1243 mg/kg (rabbit)

Primary irritant effect:
on the skin Irritant to skin and mucous membranes.
on the eye Irritating effect.
Sensitization Sensitization possible through skin contact.

General notes: Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water Do not allow product to reach ground
water, water course or sewage system. Danger to drinking water if even small quantities leak into the ground.

Product:
• Recommendation : Must not be disposed together with household garbage. Do not allow product to reach sewage system.
• Uncleaned packaging: Recommendation: Disposal must be made according to official regulations.

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable Liquids.
  Danger code (Kemler) 339
  UN-Number 1919
  Packaging group II
  Hazard label 3
  Description of goods 1919 METHYL ACRYLATE, STABILIZED
Maritime transport IMDG
  IMDG Class 3
  UN Number 1919
  Label 3
  Packaging group II
  EMS Number F-E,S-D
  Marine pollutant No
  Proper shipping name METHYL ACRYLATE, STABILIZED
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1919
  Label 3
  Packaging group II
  Proper shipping name METHYL ACRYLATE, STABILIZED

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases:
11 Highly flammable.
20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
36/37/38 Irritating to eyes, respiratory system and skin.
43 May cause sensitisation by skin contact.
• Safety phrases:
2 Keep out of the reach of children.
9 Keep container in a well-ventilated place.
25 Avoid contact with eyes.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not
establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Methyl Acrylate SUPPLIER in Dubai, Mumbai, Muscat, Kolkata, Chennai, Visakhaptanm, Surat, Gandhidham, Ajman, Abudhabi, Sharjah, UAE, Ruwi, Barka, Muscat, Sudan, Yemen, Nairobi

Our stock points and branches