Your shopping cart is empty.
Performance Characteristics
Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.
Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of RXSOL CIA 222.
Slump and Temperature Development: RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.
Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by RXSOL CIA 222.
| Appearance (Colour) | : White |
| Appearance (Form) | : Crystalline compound |
| Solubility (Turbidity) | : 50% aq. solution Clear |
| Solubility (Colour) | : 50% aq. solution Colourless |
| Assay | : min. 98.5% |
| pH (5% aq. solution) | : 5.0 - 6.0 |
| Loss on drying | : max. 0.2% |
| Sulphated Ash | : max. 0.01% |
| Iron (Fe) | : max. 0.0001% |
| Chloride (CI) | : max. 0.0005% |
| Nitrate (NO3) | : max. 0.001% |
| Arsenic (As) | : max. 0.00002% |
| Appearance (Colour) | : White |
| Appearance (Form) | : Crystalline compound |
| Solubility (Turbidity) | : 50% aq. solution Clear |
| Solubility (Colour) | : 50% aq. solution Colourless |
| Assay | : min. 98.5% |
| pH (5% aq. solution) | : 5.0 - 6.0 |
| Loss on drying | : max. 0.2% |
| Sulphated Ash | : max. 0.01% |
| Iron (Fe) | : max. 0.0001% |
| Chloride (CI) | : max. 0.0005% |
| Nitrate (NO3) | : max. 0.001% |
| Arsenic (As) | : max. 0.00002% |
Properties :
| Form | :Powder |
| Colour | :Off-white |
| Odour | :Odourless |
| Flash point | :Not applicable |
| Flammability | :Not flammable |
| Bulk density | :Approx. 750 kg/m3 |
| Self ignition | :Not self-igniting |
| Explosion hazard | :Not explosive |
| Fire promoting properties | :Not fire-propagating |
| Solubility in water |
:Forms a viscous solution. |
Anionic Polyelectrolyte is white colored free-flowing powder which is widely used in food processing, chemical, petrochemical, and dairy industries. It can also be used for destabilizing colloidal suspension by inducing flocculation and precipitation. This polyelectrolyte is required for stabilizing solutions and to impart desired characteristics. It is most commonly used for enhancing efficiency of filtration and clarification processing of sugar. The product offered by us is compatible to be used for any pH conditions which make it suitable for paper making and wastewater and drinking water treatment industries. It is known to have ability to settle inorganic suspended solids.
| Appearance | White Powder, Granular, |
| Chemical Name | Sodium Dichloroisocyanurate |
| Formula | C3O3N3Cl2Na |
| Chlorine | >62% |
| Molecular Weight | 219.95 |
| pH (1% solution) | 6.0 to 7.0 |
| Moisture | 0.5 to 1.00% max |
| Solubility @ 25°C | Completely soluble in water |
| Density | Tap density = 0.974 g/mL |
The requirements for pool water testing in the application of dichlor based products should be indicated on the product label. The primary parameter to be tested is the level of FAC in the water. The choice of testing methods will vary depending on the type of pool (residential or commercial) and local regulations and standards. The product label should recommend that the pool water quality be properly balanced. This requires testing of the pool water balance parameters of pH, alkalinity, calcium hardness, and stabilizer (i.e. cyanuric acid).
Concentrate Heat Transfer Antifreeze Liq
| Colour | : | Clear |
| Odour | : | PRACTICALLY ODOURLESS |
| Solubility in water | : | SOLUBLE |
| Boiling point | : | 104 oC |
| Viscosity | : | 58.1 cp at 20 oC |
| Freezing Point | : | -22 oC |
| Reverse Alkalinity | : | Minimm 15.0 ml |
| Vapour pressure | : | .07 mbar at 20oC |
| Skin absorption/irritation | : | YES |
| TLV Country | : | |
| Pollution category 1994 | : |
III |
Persistence and degradability Readily biodegradable.
Urea formaldehyde resin (UFR) is a synthetic thermosetting resin made from the reaction between urea and formaldehyde. Colorless to pale yellow liquid.
Water based alkyd resin WL-310 is a modified alkyd emulsion diluted with water neutralized by ammonia, containing a small amount of co-solvent. This product reduces the content of organic volatiles (VOC) on the coating surface. Meanwhile, it combines the characteristic of fast drying, with the good film performances . (including high gloss, excellent salt fog resistance).
It is recommended to use in high performance protective coating and steel structure coating for indoor and outdoor metal equipments, can be used as primers and topcoats.
* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. *
Use a strainer at the pumpstack when circulating any solution. Tank Lining – Stainless / Epoxy, Phenolic
Product Properties:-
|
Appearance |
Colourless Liquid |
|
|
Density |
g/cm3 at 15°C: 1.2 |
|
|
pH |
10% solution 1.5-2.5 |
|
|
Compatibility Metal |
Concentrate and long touch may corrode. |
|
|
Rubber |
No known effect |
|
|
Packaging |
Order No:RXSOL MB 1011 HD |
Size (in litres) 25 , 35 |
Characteristics:-
• Non-flammable.
• Prevents further rusting.
• Economical , cost effsctive.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t affect rubber and plastic compounds
Note:- When cleaning aluminium, brass & copper flush with water upon completion of cleaning
What is METAL BRIGHT MB ?
Phosphoric Acid-Based Ship Cargo Hold Cleaner with Wetting Agents Specified Marine Chemicals :
RXSOL METAL BRIGHT MB is a powerful acid-based cleaner formulated with phosphoric acid and wetting agents for effective removal of stubborn residues in cargo holds and tanks. It is specially designed to eliminate white lime residues, cement, cement clinker, gypsum, and ore deposits. It is also highly effective against fatty acid residues and caustic soda buildups.
In addition to its cleaning power, RXSOL METAL BRIGHT MB brightens and restores the appearance of metal surfaces such as aluminum, copper, and stainless steel, making it ideal for ship maintenance and cargo tank cleaning.
METAL BRIGHT MB is a high-performance metal surface brightener and descaler, widely used in the marine shipping industry for cleaning and restoring metallic surfaces, especially in engine rooms, cargo areas, and pipelines. It is typically based on inhibited phosphoric acid blended with wetting agents and corrosion inhibitors, making it both effective and safe for use on various metals.
Key Features of RXSOL METAL BRIGHT MB:
Removes lime, cement, clinker, gypsum, and ore residues
Effective against fatty acids and caustic soda contamination
Brightens and cleans aluminum, copper, and stainless steel surfaces
Contains wetting agents for enhanced cleaning efficiency
Ideal for cargo hold and tank cleaning operations
Safe and effective when used as directed
