Your shopping cart is empty.
| CharactersItics | Properties | |
| Appearance Thermal Firmness | Clear yellow liquid 250° C | By keeping heat transfer surfaces free of scale, Ensures that the evaporator works at maximum efficiency. |
| Density | In g/cm3 at 15°C: 1.1 |
Permits more efficient evaporation. |
| pH (1 Vol%) | 9 |
Reduces downtime and maintenance costs. |
| Compatibility | Concentrated, safe liquid, easy and economical dosing. | |
| Metal | No known effect |
For use in both high pressure and vacuum evaporators |
| Rubber | No known effect | The antifoaming properties ensure that distillate quality is high |
| Packaging |
20 / 25 ltr |
Improves the quality of distilled water |
RXSOL-51-6001-025 is a concentrated solution of a POLYELECTROLYTE polymer and Antifoaming Agents for use in SEA WATER evaporator as a controller of scale and foam in side the evaporators. It can be used as a scale inhibitor in the feed water to EVAPORATORS producing fresh water .
A liquid polymer-based evaporator treatment specially designed to control and prevent scale formation in evaporators
| Appearance | : Clear, dark yellow liquid |
| Density | : 1.14 – 1.16 g/cm3 |
| Viscosity | : Approx. 50 mPa.s |
| pH-value | : 4.8 – 5.3 |
| Boiling Point | : 105° C |
| Freezing Point | : -10° C |
| Solubility in water | : unlimited |
Other Valuable grade :::
Nu-look Tire Dressing TYRE ( http://rxmarine.com/nu-look-tire-dressing ) Part No. RXSOL-41-4107-025
Gloss Tyre Enhancer ( http://rxmarine.com/gloss-tire-enhancer ) Part No. RXSOL-41-4109-010
This bulk brake cleaner is quick evaporating and leaves no film after use. Contains no harmful solvents. Use to refill pressurize containers or trigger sprayers for cleaning parts, tools, brake parts, and other item. Save money and help the environment by refilling containers instead of throwing money away on aerosol cans. Saving for most customers is 30 - 50 % over aerosols. Don't pay for propellants in aerosols when you can use 100% of your spray container.
Health Hazard Data: Harmful or fatal if swallowed. Contains petroleum distillates. If swallowed, DO NOT INDUCE VOMITING. Call a physician immediately. Avoid prolonged or repeated breathing of vapors. Extremely flammable. Do not use near fire, flame, or while smoking.
A professional-grade degreasing solution specially formulated for effective cleaning of brake system components. The liquid penetrates deeply to dissolve oil, grease, brake fluid, and carbon deposits, ensuring clean and reliable braking surfaces. Fast-acting and residue-free, it restores performance without leaving harmful films. Its heavy-duty solvent blend is designed for soak, dip, or brush applications in workshops and service centers. Safe for use on most metallic brake parts, it simplifies maintenance and reduces downtime.
| Assay | Min.98% |
| Heavy metals (as Pb) | Max. 5ppm |
| Insolubility in water | Max. 50 ppm |
| Cl (Chloride) | Max. 50 ppm |
| So4 (Sulphate) | Max. 100 ppm |
| Fe (Iron) | Max. 1 ppm |
| pH (200c; 5%) | 4.2 to 5.8 |
| Ignition residue (So4) | Max. 0.025% |
| Substances reducing iodine | Max. 0.4% |
| S (Sulphide) | Max. 10 ppm |
| Cu (Copper) | Max. 4 ppm |
| Pb (Lead) | Max.4 ppm |
Ammonium Thiocyanate (Analytical reagent grade) – 500 gm – CAS no – 1762-95-4
Precaution: The primary hazard is the threat posed to the environment. Immediate steps should be taken to limit its spread to the environment.
AMMONIUM THIOCYANATE can release ammonia vapours if mixed with a chemical base or with an acid. Violent or explosive reactions have occurred when thiocyanates are mixed with oxidizing agents (such as chlorates(potassium chlorate), nitrates, nitric acid, and peroxides). Nitric acid violently oxidized a thiocyanate solution.
Appearance /Physical state : Slightly viscous clear to slightly opaque Liquid
Odour : None Odour threshold : No available data
pH : 11.3 Relative evaporation rate : No available data
Melting point : No available data
Freezing point : -2°C
Boiling point : 100°C
Flash point : Not applicable (aqueous solution)
Auto-ignition temperature : No available data
Decomposition temperature : No available data
Flammability (solid, gas) : Not applicable (aqueous solution)
Vapour pressure : No available data
Relative vapour density at 20°C : No available data
Relative density : 1.0 to 1.01 @ 20°C
Density : No available data
Solubility : Dispersible
Viscosity : No available data
Explosive properties : No available data
Oxidising properties : No available data
Keep away from children. Refer MSDS before using this product.
| Property | Typical Value |
|---|---|
| Appearance | White powder |
| Odour | Mild |
| Bulk density | ~1.20 – 1.30 g/cm³ |
| Solubility | Soluble in water |
| pH (1% aqueous solution) | < 2.0 |
| Freezing point | Not applicable |
| Stability / Shelf Life | 2 years under normal conditions, stored dry and sealed |
PRODUCT PROPERTIES :
| Appearance | White – Powder |
| Density | 1.2g/cm3 |
| pH | Acidic |
| Compatibility | |
| Metal | Avoid aluminium, zinc, tin and their alloys. Avoid galvanised surfaces |
| Rubber | No known effect |
Physical Properties:
| Density | 2.7 |
| Form | Solid |
| Colour | White Powder |
| Odour | Odourless |
| Water solublity | Insoluble in water |
