Acidic Detergent RXSOL 240

Product Code: RXSOL-15-1011-025

Size:

Color:

Product Short Description: Acidic cleaning agent used for the removal of light oil, rust and grease from steel, descaler and oxydes remover
Product Technical Specification:
Remarks:
Images: Alt

BioClean Organic Debris Cleaner 99

Product Code: RXSOL-33-3323-035

Size:

Color:

Product Short Description: High pH liquid to remove microbiological fouling organics, silt, and other particulate deposits from polysulfone, fluorocarbon, and all polyamide thin film composite reverse osmosis (RO) and ultrafiltration (UF) membranes. The product is effectively used in nanofiltration (NF), and microfiltration (
Product Technical Specification:

Physical and Chemical Properties :
 

Appearance

Colorless To Amber

Physical State

Liquid

Specific Grav.(70F,21C)

> 1

pH As Is (approx.)

> 10 (Alkaline)

Odor

Odourless

Flash Point P-M

(CC) > 200F > 93C

Vapor Pressure (mmHG)

~ 18.0

Solubility (water)

100.0

Evaporation Rate

(Ether=1) < 1.00

 
Remarks:

Materials Compatibility:
Corrosion-resistant equipment, such as PVC, should be used for the storage and preparation of this product. Pumping materials coming in contact with the concentrated or diluted products should also be corrosion resistant.

Packaging Information:
BioClean Organic Debris Cleaner 99 (Membrane Cleaner)  is a liquid material, available in a wide variety of customized containers and delivery methods. Contact your GE representative for details.

Safety Precautions:
A Material Safety Data Sheet containing detailed information about this product is available upon request.

Images: Alt

Membrane Cleaner ORG 77

Product Code: RXSOL-33-3304-050

Size:

Color:

Product Short Description: ADVANCE MEMBRANE SYSTEM CLEANER FOR R.O PLANT Membrane Cleaner Removal of Iron Containing deposits
Product Technical Specification:
Property Value
Appearance Clear to light yellow liquid
Odor Mild acidic
pH (1% solution) ~3.6 (buffered)
Specific Gravity 1.20 – 1.25
Solubility Fully miscible in water
Remarks:

Key Features of Membrane Cleaner ORG 77

  • Highly effective against iron oxide and hydroxide fouling.
  • Provides secondary cleaning of light calcium carbonate scale.
  • Buffered formulation ensures stable pH ~3.6 throughout cleaning.
  • Color change indicator – exhausted solution turns red/brown when saturated with iron.
  • Compatible with all major RO, NF, and UF membranes.
  • Enhances system performance by restoring flow and salt rejection rates.
Images: Alt

Oil Emulsion Brite

Product Code: RXSOL-26-2631-001

Size:

Color:

Product Short Description: Laundry Emulsifier detergent contains a blend of nonionic and anionic surfactants and fluorescent whitening agent.
Product Technical Specification:

 

Form         Liquid
Colour Clear
Odour Charachteristic
Boiling point and boiling range  Not Determine
Flash Point 72°C
Bulk Density 0.89 - 0.97
pH 6 -7
Solubility in Water Soluble
 
Remarks:
Images: Alt

FOT Low Sulphur Conditioner

Product Code: RXSOL-70-7027-025

Size:

Color:

Product Short Description: Superior additive to maintain homogenious dispersion of FUEL oil BLEND. Its chemical reaction improves water separation in tanks and separators which also increase combustion efficiency.
Product Technical Specification:

Flash Point PM CC                              : Approx. 80 0C

Specific Gravity (200C)                        : Approx. 0.9

IMO Code                                             : 9-3082-T310

Remarks:
CLEAN FUEL, HIGH PERFORMANCE
KEY FEATURES
Powerful fuel treatment that prevents sludge formation and fuel stratification in storage tanks. It breaks water-in-oil emulsions and improves water and sediment separation. This results in cleaner bunker lines, reduced filter blockages, and more efficient combustion. The additive enhances fuel homogeneity, ensuring smoother engine operation. Centrifugal separation systems work more effectively. All fuel system components stay cleaner and more reliable.
  • Disperses sludge – prevents sediment build-up in fuel tanks
  • Breaks emulsions – improves water and contaminant separation
  • Enhances combustion – creates a more uniform fuel mixture
  • Protects equipment – keeps filters, injectors, and lines clean
  • Improves fuel stability – reduces stratification and sludge formation
  • Boosts separator efficiency – helps centrifugal units work better
Images: Alt

Cement Remover Advance Formula

Product Code: RXSOL-10-3006-008

Size:

Color:

Product Short Description: Specially formulated heavy-duty cleaner to remove stubborn cement, concrete, grout, and lime deposits from metal, plastic, and painted surfaces. Safely and effectively removes even the most difficult temporary cements from common dental surfaces.
Product Technical Specification:
Appearance: Clear liquid (Another variant also available as GEL)
 
Colour: Colourless to pale yellow
 
Odour: Pungent acidic
 
pH (1% solution): < 1
 
Specific Gravity: 1.08 – 1.12 at 25 °C
 
Solubility: Completely soluble in water
Remarks:

Frequently Asked Questions - Cement Remover Advance

1. What is Cement Remover ADVANCE used for?
Cement Remover ADVANCE is used for dissolving and removing hardened cement, mortar, lime, and concrete deposits from construction equipment, floors, tiles, walls, and industrial surfaces.
 
2. How is it different from normal cement removers?
 
Unlike ordinary acid-based cleaners, Cement Remover ADVANCE contains a dual modified acid system along with corrosion inhibitors and surfactants. This makes it more powerful, safer on metals, and lower in fuming.
 
 
3. Can Cement Remover ADVANCE be used on tiles and painted surfaces?
 
Yes, it can be used on tiles, ceramics, and painted surfaces, provided it is used in the recommended dilution. Always do a small patch test before full application.
 
4. How should it be diluted for use?
 
Heavy deposits: Dilute 1:2 with water or use undiluted if too heavy deposits
 
Normal cleaning: Dilute 1:5 with water.
 
Light deposits / routine cleaning: Dilute 1:10 with water.
 
5. Does it come in liquid or gel form?
 
Both. Cement Remover ADVANCE is available as a clear liquid for general use and as a gel formulation that clings to vertical walls and overhead surfaces for longer contact time.
 
6. Is it safe to use indoors?
 
Yes, but ensure good ventilation. Cement Remover ADVANCE should always be used with PPE (gloves, goggles, mask) in a well-ventilated area.
 
7. Can it remove lime scale and rust?
 
Yes. The dual modified acid system helps dissolve lime scale, calcium carbonate, and mineral deposits. It can also assist in removing light rust stains, although it is primarily designed for cement and concrete residues.
 
8. How long should it be left on the surface?
 
Allow a contact time of 5–10 minutes. But contact time varies from deposit to deposit. Do not allow the solution to dry on the surface. Rinse thoroughly with plenty of clean water. Repeat the process if necessary.
 
9. What packaging options are available?
 
Cement Remover ADVANCE is supplied in 25 Ltr cans, 210 Ltr drums, 1000 Ltrs IBC Tanks. Custom packaging is available on request.
Images: Alt

ORG 75 Membrane Clean MC Acid Cleaner

Product Code: RXSOL-33-1092-025

Size:

Color:

Product Short Description: Rapid mineral scale removal acid based cleaners for membrane systems.
Product Technical Specification:
Parameter Value
Appearance Clear, colorless to slightly hazy liquid
Odor Mild, acidic
pH (1% solution) < 2
Specific Gravity (25 °C) ~ 1.20 – 1.25 g/cm³
Solubility Completely miscible in water
Flash Point Non-flammable
Boiling Point > 100 °C
Freezing Point ~ –10 °C
Remarks:

Frequently Asked Questions FAQs on Membrane Cleaning Liquid

Q1. What is ORG 75 Membrane Cleaning Acid used for?
ORG 75 is an acidic membrane cleaner designed to remove inorganic scales, carbonates, sulfates, and iron deposits from RO, NF, UF, and MF membrane systems that are acid-tolerant.
 
Q2. Why is the recommended dosage only 0.3%?
Even at a low concentration (~0.3% v/v), it provides sufficient acidity to dissolve mineral scales without exceeding the pH limits recommended by membrane manufacturers. This ensures safe but effective cleaning.
 
Q3. How often should I clean with ORG 75 Membrane Cleaning Acid?
Cleaning is recommended when:
  • Normalized permeate flow drops by 10–15%, or
  • Differential pressure rises by 15–20%.
For preventive maintenance, many plants schedule cleaning every 3–6 months, depending on feedwater quality.
 
Q4. Is ORG 75 Membrane Cleaning Acid compatible with all membranes?
It is compatible with most acid-tolerant RO, NF, UF, and MF membranes. However, always verify with the membrane manufacturer’s chemical compatibility guidelines.
 
Q5. Can ORG 75 Membrane Cleaning Acid  be used at higher concentrations for severe fouling?
Yes, in exceptional cases of heavy scaling, higher concentrations (up to 0.5–1.0%) may be used, but only under the advice of the membrane OEM or a water treatment specialist.
 
Q6. Is ORG 75 Membrane Cleaning Acid  safe to handle?
It is a corrosive acidic liquid. Operators must wear gloves, goggles, and protective clothing during use. It is safer than stronger mineral acids like HCl, but still requires standard chemical handling precautions.
 
Q7. What happens if the cleaning solution is reused?
A solution can sometimes be reused if not heavily contaminated, but effectiveness drops as it neutralizes during cleaning. For best results, prepare a fresh 0.3% solution for each CIP cycle.
 
Q8. How should ORG 75 Membrane Cleaning Acid  be stored?
Store in tightly closed HDPE containers in a cool, dry, well-ventilated area, away from strong alkalis and oxidizers. Avoid freezing and direct sunlight. Shelf life is 24 months.
Images: Alt

Polycarboxylate Ether Superplasticizer Dry

Product Code: RXSOL-67-6701-026

Size:

Color:

Product Short Description: Concrete Admixtures Polycarboxylate Ether Polymers
Product Technical Specification:
Remarks:
Images: Alt

Polycarboxylate Ether PCE

Product Code: RXSOL-67-6701-210

Size:

Color:

Product Short Description: Concrete Admixtures Polycarboxylate Ether Polymers
Product Technical Specification:
Remarks:
Images: Alt

ALKACLEAN s. LAC

Product Code: RXSOL-22-2015-210

Size:

Color:

Product Short Description: A very strong alkaline cleaner, which can be used to soften up / remove baked on drying oils
Product Technical Specification:
  • Removes grease, oil, carbon deposits, soil and grime.
     
  • Keeps loosened deposits in suspension preventing re-deposition.
     
  • Low toxic.  , Non-flammable.
     
  • Free from hydrocarbon solvents.
     
  • Effective and economical in use , Water-based cleaner.
     
  • RXSOL-20-2015-020 has numerous cleaning applications including removal of greases, waxes,
     
  • oil, sludge, soot, carbon   deposits and general dirt and grime.
     
  • Non-corrosive to ferrous metals.  Suitable for all tank-coatings.
     
  • Can be used for gas and hydrocarbon freeing of tanks.
     
  • Can be used for deodorizing
     
  • Contains wetting agents.


NOTE : Acts as an acid-neutralizing agent.

Remarks:

ALKACLEAN s.  LAC supplier and exporter. Cleaner, Alkaline Marine  Degreaser, Alkaline Heavy Duty, For Removing Oil, Grease, Fats and Other Soils, Packed in 25 Ltr Pail and also in 50, 210 Ltr

Images: Alt

Sodium Ethoxide

Product Code: RXSOL-19-3756-025

Size:

Color:

Product Short Description: It is commonly used as a strong base
Product Technical Specification:

 

Physical Properties:

Melting Point > 450 °C
Boiling Point   2.850 °C - lit
Flash Point  30 °C - closed up
Density 0,87 g/cm3 at 20 °C
Appearance Crystalline Powder
Colour White to light yellow
PH 12,6 at 20 °C
Vapour Pressure  < 0,1 hPa at 20 °C  
Solublity Soluble in methanol and ethanol

 

Remarks:
Images: Alt

Sodium Ethoxide

Product Code: RXSOL-19-3356-027

Size:

Color:

Product Short Description: Sodium ethoxide, also referred to as sodium ethylate, is the ionic, organic compound
Product Technical Specification:
Remarks:
Images: Alt
stock-clearance.png