Your shopping cart is empty.
Product Code: RXSOL-19-3760-025
|
ITEM |
: |
per CHLORO ETHYLENE , Cl2C:CCl2 |
|
DATE OF SUPPLY |
: |
12.6.2025 |
SPECIFICATION OF PRODUCT |
|
|
|
CAS No. |
: |
127-18-4 |
|
Density |
: |
1.625 |
|
B.P. |
: |
121 OC |
|
IDENTITY |
: |
By IR spectrum |
|
WATER CONTENT, WT. % MAX |
: |
0.03 % |
|
APPEARANCE |
: |
CLEAR COLOURLESS LIQUID |
|
NON VOLATILE MATTER |
: |
0.002% |
|
SULPHURCOMPOUNDS ( as S ) |
: |
0.003 % |
|
ORGANIC IMPURITIES |
: |
PASSES ACID WASH TEST |
|
PHASE |
: |
LIQUID |
|
TLV |
: |
50 ppm in air |
|
PROPERTIES |
: |
Miscible with alcohol , ether , and oils ; insoluble in water . Nonflammable. |
Perchloroethylene is used in aerosol formulations for the automotive aftermarket, particularly for brake cleaning, as well as water repellents for garments, spot removers and silicone lubricants. It can be used as an insulating fluid in some electrical transformers as a substitute for polychlorinated biphenyls (PCBs).
Product Code: RXSOL-19-3760-300
Chemical Name: Tetrachloroethylene
Formula: C₂Cl₄
Type: Non-flammable, chlorinated solvent
Appearance: Colorless liquid with a sweet, ether-like odor
Toxic if inhaled in large amounts or over time (linked to liver, kidney, and nervous system effects)
Classified as a possible human carcinogen
Requires well-ventilated, sealed systems and PPE for operators
Strictly regulated in many countries (e.g., banned or phased out in California, EU restrictions)
Hydrocarbon solvents (less aggressive, more eco-friendly)
Liquid CO₂ cleaning
Siloxane-based solvents (e.g., GreenEarth®)
Professional wet cleaning (water-based with special machines and detergents)
Perchloroethylene remains effective but is increasingly being replaced due to safety and environmental concerns. Dry cleaners using PERC must comply with strict safety protocols and environmental regulations.
Product Code: RXSOL-15-2658-005
Product Code: RXSOL-43-4035-220
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
Product Code: RXSOL-39-1668-005
| Appearance | Clear, Slight Yellow |
| Odor | Fresh |
| pH | Alkaline |
| Sp. Gravity | >1.15 |
Product Code: RXSOL-15-1055-210
Advantage : RXSOL STAINLESS STEEL CLEANER cleans and polishes in one easy operation. Resists finger printing and masks surface blemishes on stainless steel, chrome and architectural aluminium. Natural derived solvents clean the surface of the metal and also provide a protective film on surfaces keeping them in new condition.
Product Code: RXSOL-43-4022-025
| Parameter | Value |
|---|---|
| Appearance | Clear, pale amber liquid |
| Odor | Mild, characteristic |
| pH (as supplied) | Acidic |
| Specific Gravity @ 25°C | 1.12 – 1.18 |
| Solubility | 100% water soluble |
| Biodegradability | >90% (readily biodegradable) |
Product Code: RXSOL-42-4029-050
| Parameter | Result |
|---|---|
| Appearance | Paly Yellow, Clear liquid |
| Density | 1.01-1.1 |
| Boiling Poitnt | 100 degree celcius |
Frequently Asked Questions about Boiler treatment
Answer:
A corrosion scale inhibitor is a chemical solution designed to prevent rust, corrosion, and scale formation inside boiler systems. It protects metal surfaces from degradation and ensures smooth heat transfer, ultimately extending the lifespan of the boiler and reducing energy costs and maintenance downtime.
Answer:
Choosing the right inhibitor depends on:
Boiler pressure and temperature
Feedwater quality (e.g., hardness, pH, oxygen content)
Type of scaling or corrosion (e.g., calcium carbonate vs. oxygen pitting)
Look for inhibitors that are multi-functional, offering both scale and corrosion protection, and ensure they’re compatible with your boiler material (carbon steel, copper alloys, etc.).
Answer:
The frequency of dosing depends on your boiler’s operating conditions, feedwater quality, and the type of inhibitor used. Typically, dosing is done continuously through a dosing pump or daily during boiler operation. Regular water testing and monitoring (pH, conductivity, hardness) is essential to maintain the correct inhibitor levels and ensure optimal protection against corrosion and scale.
Product Code: RXSOL-42-1524-050
| Solubility (10 % Aquous Soln) | V. S. Hazy to clear solution. |
| pH Value of 5% Solution | 3.5 to 4.5 |
| Specific Gravity @ 25° C | 1.310 – 1.370 |
| Density, lbs/gal @ 25° C | 10.9 - 11.3 |
| Description | Oxygen Scavenger for Boiler |
| Standard Packing | 30 Kg / 50 Kg. / 250 kg HM HDPE Barrel |
The most common oxygen scavengers in oilfield production are sodium bisulfite (SBS) and ammonium bisulfite (ABS). Ammonium bisulfite is more water soluble than sodium bisulfite and typically react with oxygen faster. However, ammonium in the ammonium bisulfite can promote bacteria growth.
Being a salt of a weak acid and a strong base, sodium bisulfite forms a significantly basic aqueous solution whereas ammonium bisulfite is only slightly basic at around pH 8. As a rule of thumb, 60ppm of 65wt% ammonium bisulfite is required to reduce the oxygen concentration in water from 9ppm to 50ppb.
The reaction of bisulfite with oxygen is typically faster at higher temperatures and can be facilitated by transition metal ion catalysts, e.g. Cobalt.
The most common applications of oxygen scavenger in oil and gas production are for seawater injection facilities, hydro-testing, and acid stimulation
It is used to arrest oxygen in sea water
It removes Entrapped Oxygen and thus reduces Corrosion
In Oil Drilling Chemicals
Product Code: RXSOL-27-1464-240
Physical Properties:
| Melting Point | −7 °C(lit.) |
| Boiling Point | 125-127 °C0.1 mm Hg(lit.) |
| Density | 1.124 g/mL at 20 °C(lit.) |
| Vapour density | 5.2 (vs air) |
| Vapour pressure | <0.01 mm Hg ( 20 °C) |
| Refractive index |
n |
| Flash Point | 165 °C |
| Storage temprature | Store below +30°C. |
| Solublity | H2O: 50 mg/mL at 20 °C, clear, colorless |
| Form | Viscous liquid |
| pKa | 14.06±0.10(Predicted) |
| Colour | Clear very slight yellow |
| PH | 5.5-7.0 (25℃, 50mg/mL in H2O) |
| Odour | Very mild sweet |
| Explosive limit | 0.9-9.2%(V) |
| Water solublity | Soluble |
| Sensitive | Hygroscopic |
| Dielectric constant | 2.4（25℃） |
| Stability | Stable combustible incompatible with strong oxidizing agent |
| H2O: 50 mg/mL at 20 °C, clear, colorless |
Product Code: RXSOL-46-1149-240
| Appearance | White Powder to Crystal |
| Purity(GC) | min. 98.0 % |
| Melting point | 72.0 to 76.0 °C |
| Solubility in Hot Methanol | Almost transparency |
Chemical properties: Diphenyl phthalate has the following chemical and physical properties:
Product Code: RXSOL-19-1533-026
Properties :
| Compound Formula | H3NaOS |
| Molecular Weight | 74.08 |
| Appearance | White crystals or chunks |
| Melting Point | 52-54 °C |
| Boiling Point | N/A |
