Your shopping cart is empty.
* If the mixture is allowed to overheat, it will soften epoxy / phenolic coating. *
Use a strainer at the pumpstack when circulating any solution. Tank Lining – Stainless / Epoxy, Phenolic
Product Properties:-
|
Appearance |
Colourless liquid |
|
|
Density |
g/cm3 at 15°C: 1.2 |
|
|
pH |
10% solution 1.5-2.5 |
|
|
Compatibility Metal |
Concentrate and long touch may corrode. |
|
|
Rubber |
No known effect |
|
|
Packaging |
Order No:RXSOL MB 1011 HD |
Size (in litres) 25 , 35 |
Characteristics:-
• Non-flammable.
• Prevents further rusting.
• Economical , cost effsctive.
• Surface brightening
• Protects and maintains from corrosion
• Acts as rust proofing agent before the application of paints or coatings.
• It doesn’t affect rubber and plastic compounds
Note:- When cleaning aluminium, brass & copper flush with water upon completion of cleaning
RustoCIDE is Rust Cleaning detergent with advanced formulation with Non Ionic Detergent and Mixture of Inhibited Acid.
Appearance Clear, colorless liquid
Physical State Liquid
Color Colorless
Odor Characteristic Odor
Odor threshold Not applicable
pH <= 3.7
Melting point/freezing point -22 °C
Boiling Point/Range 105 °C
Flash point Not flammable
Evaporation Rate No information available
Flammability (solid, gas) Not flammable
Flammability Limit in Air Not applicable
Upper flammability limit:
Lower flammability limit:
Vapor pressure 26 mm Hg @ 30 °C
Vapor density No information available
Density 1.10 g/cm³ @ 20ºC
Specific gravity 1.10
Water solubility completely soluble
Solubility in other solvents No information available
Partition coefficient log Kow = -1.5 @ 20 °C
Autoignition temperature Not combustible
Decomposition temperature 100 °C
Viscosity, kinematic 1.06 cP @ 20 °C
Viscosity, dynamic No information available
Explosive properties No information available
Oxidizing properties Strong oxidizer
Molecular weight 34
Bulk density Not applicable
| Properties | Result |
| Appearance Color (at 25 °C) | : Water White |
| Appearance Clarity (at 25 °C) | : Clear |
| Odour (at 25 °C) | : Citrus |
| Density (at 20 °C) g/cm2 | : 0.80 |
| Flash Point (Boil Temperature) | : 66 °C |
| Specific Gravity | : 0.768 |
| Vapor Pressure K Pa | : 0.5 |
AFRIBAT 69 WP : Mancozeb 60%+ Dimethomorph 9%
| Specification | Result |
| Appearance/nature | :Clear liquid Colour |
| Colour | : Colourless to pale yellow |
| pH (5 % aqueous solution) | : 4 - 6 |
| Active matter, % by mass (Mol.wt. 360) | : 29 - 31 |
| Chloride, % by mass as NaCl, maximum | : 6 |
| Free amido amine, % by mass | : 0.5 Max |
| Fatty acid, % by mass, maximum | : 0.5 |
| Solid content (1050C, 2 hrs) % by mass, | : 36 Min. |
| Specific Gravity (at 200C) | : 1.045 – 1.065 |
| Microbial count, TVC, cfu/ml | : < 10 |
| Microbial count, Y/M, cfu/ml | : < 10 |
| Vapour pressure (mm Hg) | : Similar to water |
| Vapour density (Air = 1) | : Similar to water |
| Solubility | : Soluble in water, ethanol and isopropanol. |
| CHARACTERISTICS | TYPICAL VALUES |
| Appearance | : Clear, Fluid |
| Odor | : Characteristic |
| Spcific Gravity | : 0.85 - 0.95 |
| % Volatiles | : 95 ± 2 |
| Surface Tension (dynes/cm) | : 38 |
| Dielectric Strength (kV/mm) | : 20 (min) |
| Dielectric Constant | : 1.8 |
| Humidity Cabinet Resistance (days) | : 7 (min) |
| Degreasing Efficiency (%) | : 98 |
|
Compliance by FTIR (%) |
: 97 |
