Your shopping cart is empty.
|
|
|
|
Properties |
|
|
Molecular formula |
HCl in water (H2O) |
|
Molar mass |
36.46 g/mol (HCl) |
|
Appearance |
Clear colorless to light-yellow liquid |
|
Melting point |
−26°C (247 K) 38% solution |
|
Boiling point |
110 °C (383 K), 20.2% solution; |
|
Solubility in water |
Miscible |
|
Acidity (pKa) |
−8.0 |
|
Viscosity |
1.9 mPa s at 25° C, |
|
Flash point |
Non-flammable |
Safety
Hydrochloric acid in high concentrations forms acidic mists. Both the mist and the solution have a corrosive effect on human tissue, with the potential to damage respiratory organs, eyes, skin, and intestines. Upon mixing Muriatic acid with common oxidizing chemicals, such as bleach (NaClO) or permanganate (KMnO4), the toxic gas chlorine is produced. To minimize the risks while working with hydrochloric acid, appropriate precautions should be taken, including wearing rubber or PVC gloves, protective eye goggles, and chemical-resistant clothing.
Chemical & Physical Properties
| Chemical Formula | CO(NH2)2 |
| CAS Number | 57-13-6 |
| Molecular Weight | 60.056 |
| Specific Gravity | 1.140 |
| pH | 6.5 - 8.5 |
| Salt-Out Temp | 62°F (18°C) |
| Colour | Clear Liquid |
| Odor | slight ammonia smell |
Typical Analysis :
| Urea 23% Nitrogen | 50% |
| Turbidity | 5 ppm |
| pH | 8.5 Max |
| Ammonia | 0.03% |
| Biuret | < 0.25% |
| Ash | 35 ppm |
| Iron | 2 ppm |
| Chloride | 10 ppm |
| Color - Max | 0 (APHA) |
| Alkalinity - wt (NH3) Max |
0.05% |
Application Graphite most commonly used in Lubricants, Greases, Paints, Coatings, Filler, Pigments, Ink
| Product Name | : MAGNESIUM NITRATE -HEXAHYDRATE |
| CAS Number | : 13446-18-9 |
| Molecular Weight | : 256.41 |
| Min Assay Purity as percentage Magnesium Nitrate Mg (No3)2.6H2O) | : 98 - 99% |
| Assay as MgO | : 15.50% |
| N (Nitrogen) | : 10.50% |
| Apperance | : White crystalline powder/ white crystals |
| Chlorides | : 0.01 % Max |
| Sulphates | : 0.01% Max |
| Calsium (Ca) | : 0.05% Max |
| Feric (Fe) | : 0.02% Max |
| Heavy Metal | : 0.01% Max |
| pH of 5% solution | : 5 - 7 |
| Solubility in water | : Highly soluble |
| UN Class | : 5.1 |
| UN No | :1474 |
| Packing Group | : III |
| IMDG No |
: 5159 |
Physical state: Solid
Colour: White
Odour: Chlorine
Molecular Formula: Ca(OCl)2
Solubility: Soluble in water.
Specific Gravity: 2.35
Relative Vapour Density (air=1): Not available
Vapour Pressure (20 °C): Not available
Flash Point (°C): Not available
Flammability Limits (%): Not available
Autoignition Temperature (°C): Not available
% Volatile by Weight: Not available
Solubility in water (g/L): Not available
Melting Point/Range (°C): Not available
Decomposition Point (°C): ca. 180
pH: Not available
In accordance with the latest EEC Council directives this product is not subjected to any recommendation.
R8 : Contact with a flammable substance may cause fire
R22 : Harmful if swallowed
R31 : Contact with acids liberates toxic gas
R34 : Causes burns
R36/37/38 : Irritating to the eyes, respiratory system and to the skin
S2 : Keep out of reach of children
S23 : Do not breathe gas, fumes, vapor or spray
S24/25 : Avoid contact with skin and eyes
S26/28 : In case of contact with eyes or skin, rinse immediately with plenty of water for at least 15 minutes
and seek medical advice
S36/37/39 : Wear suitable protective clothing, gloves and eye / face protection
S45 : In case of accident or if you feel unwell, seek medical advice immediately (show the label if possible)
Storage :
* Keep in a Cool, Dry & Dark Place and away from Moisture, Heat & Skin.
* Keep the Container Tightly Closed after use.
* Product is highly Hygroscopic.
* Chlorine contains Stable if Stored in room temperature and may reduce depending on storage Conditions and on exposure to light & Moisture.
* Tablet are not for Swallow & Oral Use.
| Form | Liquid |
| Colour | Colourless to slightly Yellow |
| Odour | Sharp |
| Flash Point | > 100 degree C |
| Density | 1.05-1.11 g/cm3 (25 degree C) |
| pH |
3 - 7 |
Non-Flammable
Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.
Hydro Testing Corrosion Inhibitor RXSOL 4000 is a cocktail of water soluble chemicals designed to protect pipelines from corrosion during hydrostatic testing and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 incorporates oxygen scavenger to rapidly remove oxygen, biocide to prevent Microbial Influenced Corrosion (MIC), together with a film forming corrosion inhibitor to combat acid (low pH) corrosion. Hydro Testing Corrosion Inhibitor RXSOL 4000 represents a single stage treatment chemical treatment, for hydrotest and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 is a completely soluble product in fresh water, seawater and in most oilfield brine solutions. It is, therefore, suitable for use in water injection systems (which have no mechanical deaeration), hydrotest and mothball operations, and as a packer fluid. Hydro Testing Corrosion Inhibitor RXSOL 4000 has been used in a large number of major projects in the North Sea, Latin America and South East Asia.
Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice. Wear suitable gloves and eye / face protection
Performance Characteristics
Plastic Properties: The plastic properties of concrete are not significantly affected by the use of RXSOL CIA 222. However, a higher than normal dosage of air-entraining admixture may be required to achieve desired air contents.
Hardened Properties: Depending on the ingredients and proportions of a concrete mixture, a decrease in compressive strength may be experienced with RXSOL CIA 222 typically in the range of 5 to 10 percent. Please consult your local sales representative for recommended concrete mixture adjustments prior to the use of RXSOL CIA 222 admixture. Other hardened properties of concrete are not significantly affected by the use of RXSOL CIA 222.
Slump and Temperature Development: RXSOL CIA 222 has no effect on slump or the temperature development profile of concrete.
Concrete-Steel Bond Strength: Concrete to steel bond strength is not affected by RXSOL CIA 222.
TYPICAL PROPERTIES
| Appearance | : | Light yellow liquid |
| Specific Gravity @25° C | : | 1.14 |
| Flash Point | : | None |
| Freeze Point | : | -8° C |
| Water Solubility | : | Completely Soluble |
Standardized at 25°C against chemicals whose certification is traceable to NIST.
Formula: C₁₀H₁₄N₂Na₂O₈·2H₂O
MW: 372.24 g/mol
Melting Point: 255 °C
Storage Temperature: Ambient
CAS Number: 6381-92-6
EINECS: 205-358-3
