SOAP POLYMER FOR LUBRICATION OF CHAIN CONVEYORS

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

2.1 Hazardous Ingredients

2.1.1 2.1.2 2.1.3 2.1.4

CAS # EINECS No Name Concentration Warning, Risk phrases

15630-89-4 239-707-6 Sodium carbonate 1-5% R20/21/22

peroxyhydrate

497-19-8 207-838-8 Sodium carbonate 1-5% R20/21/22

2492-26-4 219-660-8 Sodium 2-mercaptobenzothiazole 1- 5% R 34, R50/53

Proprietary Aqueous partially fluorinated 1- 5% R20/21/22

Proprietary polymer 2 - 5%

Proprietary phosphate blend 75-95% R20/21/22

2.1.5 Two confidential ingredients: water based polymer, proprietary phosphate blend

2.1.6 Confidential components are not listed dangerous less than 1 percent each.

2.1.7 Other information: None

Human: This product is bolend of biodegradable ingredient may cause irritation to eyes. If swallowed the product may be harmful and cause irritation to mucous membranes.

Environment: This product is easily degradable in aquatic environment.

Eye Contact: Flush with water for at least 15 minutes. If irritation persists, seek medical attention.

Skin Contact: Wash with water. 

Inhalation: No Vapour formation

Ingestion: Wash out mouth with water. Do not induce vomiting. Dilute with one to two glasses of water. Seek medical attention.

The product is non-combustible; use suitable extinguishing media for the surrounding fire.

Self-contained breathing apparatus (SCBA) with full protective bunker gear for fire fighters.

This product is unlikely to support combustion as it is not combustible and not an oxidiser.

Exposure hazard: decomposition of product may be oxides of carbon.

Sweep up spills for re-use or disposal. Check local authority for proper disposal methods.

Do not mix this product with other waste materials.

Handle product with best business practices.

Keep this product stored away from food, drink and animal feeding stuffs.

Keep out of the reach of children. Store in a cool and dry area.

Exposure limit values:

HTP values: None

Other limit values: Nuisance dust (USA) OSHA PEL 15 mg/m3

Limit values in other countries: Nuisance dust (AICS)10mg/m3

Exposure controls: Avoid contact with eyes, skin or clothing. Avoid ingesting the product as it may be harmful. Wear a dust mask to avoid long term effect of breathing the material.Wear chemical imperious gloves to protect exposure to your hands. Wear chemical safety goggles or glasses to protect your eyes.

The product is a dry off-white powder with a clean odour.

Important health, safety and environmental information RTU

The product is stable and will not polymerise.

Avoid strong oxidising agents. Hazardous decomposition of product may be oxides of carbon.

 Sub-acute, sub-chronic and prolonged toxicity have not been determined.

Dispose in accord with National regulations.

Do not mix waste material with other waste materials.

Not Regulated.

ILO: Xi(Irritant)

WHMIS Irritant

Risk Phrases: R20/22 – Harmful by inhalation and if swallowed

R36/38 – Irritating to eyes and skin

Safety Phrases: S2 – Keep out of the reach of children

S13 – Keep away from food, drink and animal feeding stuffs

S24/25 – Avoid contact with eyes and skin

S37/39 – Wear suitable gloves and eye/face protection

S62 – If swallowed do not induce vomiting:

seek medical advice immediately and show this container or label

Special regulations on certain preparations:

HMIS NFPA

1 Health 1

0 Fire 0

0 Reactivity/Instability 0

E PPE

Restrictions on use: Ready to use after label dilution. This product intended for professional use only. Further information: This is a revised Safety Data Sheet. This information is furnished without warranty expressed or implied except that it is accurate to the best knowledge of RX MARINE International.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.