SODIUM HYDROXIDE SOLUTION IN 1M N1
- Part number
- RXSOL-60-6605-519
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Applications
What are some uses of sodium hydroxide? Sodium hydroxide is used in bar soaps and detergents. Sodium Hydroxide is also used as a drain cleaner to unclog pipes. Around 56% of sodium hydroxide produced is used by industry, with 25% of NaOH used in the paper industry.
Characteristics and notes
dissolve 40.00 g of sodium hydroxide in water to make volume 1 liter. For a 0.1 N solution (used for wine analysis) 4.00 g of NaOH per liter is needed.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | SODIUM HYDROXIDE SOLUTION IN 1M N1 |
| Part Number | RXSOL-60-6605-519 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | CAS | EC number | Weight | Index-No. |
| SODIUM HYDROXIDE SOLUTION IN 1M N1 | 1310-73-2 | 215-185-5 | 39.997 | 011-002-00-6 |
| Signal Word | Danger |
| Hazard Statements |
H290 May be corrosive to metals
H314 Causes severe skin burns and eye damage
|
| P280 Wear protective gloves.P305 + P351 + P338 | Wear protective gloves/ protective clothing/ eye protection/ face protection IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Precautionary statements - response | P234 Keep only in original packaging. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/ doctor. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P363 Wash contaminated clothing before reuse. |
| Supplemental Hazard Statements | None |
| Other hazards |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher
|
| General advice | First aiders need to protect themselves. Show this material safety data sheet to the doctor in attendance. |
| If inhaled | After inhalation: fresh air. Call in physician |
| Eye Contact | After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses. |
| swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Skin Contact | In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately. |
| If swallowed | After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Suitable extinguishing media |
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
|
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given. |
| Special hazards arising from the substance or mixture |
Sodium oxides
Not combustible.
Ambient fire may liberate hazardous vapours.
|
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
| Advice for firefighters | Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Personal Protection | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Enviromental Precaution | Do not let product enter drains. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area. |
| Reference to other sections | For disposal see section 13. |
| Precautions for safe handling | For precautions see section 2.2. |
| Conditions for safe storage, including any incompatibilities | Storage conditions No metal containers. Tightly closed. |
| Storage conditions | No metal containers. Tightly closed. |
| Storage class | Storage class (TRGS 510): 8B: Non-combustible, corrosive hazardous materials |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Storage stability | Recommended storage temperature |
| Exposure controls | Personal protective equipment |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles |
| Body Protection | protective clothing |
| Skin protection | required |
| Respiratory protection |
required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system.
Recommended Filter type: Filter type ABEK The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Control of environmental exposure | Do not let product enter drains. |
| Control parameters | Ingredients with workplace control parameters |
Gloves Suit
| Physical state | liquid |
| Colour | colorless |
| Odour | No data available |
| Odor Threshold | Not Applicable |
| pH | Not Applicable |
| Viscosity |
Viscosity, kinematic: No data available
Viscosity, dynamic: No data available
|
| Melting Point | >300°C |
| Boiling Point | No data available |
| Flash Point | No data available |
| Evaporation Rate | Not Applicable |
| Flammability (solid, gas) | No data available |
| Explosive limits | No Data Available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No Data Available |
| Density | 1,04 g/cm3 at 20 °C |
| Vapour Density | No Data Available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | Not classified as explosive. |
| Water solubility | at 20 °C soluble |
| Ignition temperature | No information available. |
| Particle characteristics | No data available |
| Other safety information | No data available |
| Reactivity | No data available |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature |
| Possibility of hazardous reactions | Violent reactions possible with: The generally known reaction partners of water. |
| Conditions to avoid | No data available |
| Incompatible materials | Strong oxidizing agentsMetals |
| Hazardous decomposition products | In the event of fire: see section 5 |
| Acute toxicity | Symptoms: If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the esophagus and the stomach. Symptoms: mucosal irritations, Cough, Shortness of breath, Possible damages:, damage of respiratory tract Dermal: No data available |
| Skin corrosion/irritation | Remarks: Mixture causes burns. |
| Serious eye damage/eye irritation |
Remarks: Mixture causes serious eye damage.
Risk of blindness!Remarks: Mixture causes serious eye damage.
Risk of blindness!
|
| Respiratory or skin sensitization | No data available |
| Serious eye damage/eye irritation |
Remarks: Mixture causes serious eye damage.
Remarks: Mixture causes serious eye damage. Risk of blindness!
|
| Germ cell mutagenicity | No data available |
| Reproductive toxicity | No data available |
| Carcinogenicity | No data available |
| Specific target organ toxicity - single exposure | No data available |
| Aspiration hazard | No data available |
| Additional Information | Endocrine disrupting properties |
| Specific target organ toxicity - repeated exposure | No data available |
| Assessment |
The substance/mixture does not contain components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Other dangerous properties can not be excluded. Handle in accordance with good industrial hygiene and safety practice
|
| Endocrine disrupting properties |
The substance/mixture does not contain components considered to have endocrine
disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated. Other dangerous properties can not be excluded. Handle in accordance with good industrial hygiene and safety practice
|
| Persistence and degradability | No data available |
| Toxicity | Mixture No data available |
| Bioaccumulative potential | No data available |
| Toxicity to fish | LC50 - Gambusia affinis (Mosquito fish) - 125 mg/l - 96 h Remarks: (ECOTOX Database) |
| Toxicity to daphnia and other aquatic invertebrates | EC50 - Ceriodaphnia (water flea) - 40,4 mg/l - 48 h Remarks: (ECHA) |
| Toxicity to bacteria | EC50 - Photobacterium phosphoreum - 22 mg/l - 15 min Remarks: (External MSDS) |
| Mobility in soil | No Information available |
| Results of PBT and vPvB assessment |
This substance/mixture contains no components considered to be either persistent,
bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
|
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Assessment | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Waste treatment Method |
See www.retrologistik.com for processes regarding the return of chemicals and
containers, or contact us there if you have further questions.
|
| UN number |
ADR/RID: 1824 IMDG: 1824 IATA: 1824 |
| UN proper shipping name |
ADR/RID: SODIUM HYDROXIDE SOLUTION
IMDG: SODIUM HYDROXIDE SOLUTION
IATA: Sodium hydroxide solution
|
| Transport hazard class(es) |
ADR/RID: 8 IMDG: 8 IATA: 8 |
| Packaging group |
ADR/RID: II IMDG: II IATA: II |
| Environmental hazards |
ADR/RID: no IMDG Marine pollutant: no IATA: no |
| Special precautions for user | Tunnel restriction code : (E) |
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006. |
| Other regulations | Take note of Dir 94/33/EC on the protection of young people at work. |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|
PALLADIUM ACETATE RXSOL-60-6605-160
PALLADIUM HYDROXIDE 20% ON CHARCOAL RXSOL-60-6605-163
PALLADIUM NITRATE 44% PD content RXSOL-60-6605-164
PALLADIUM SPONGE 99.9% POWDER RXSOL-60-6605-165
PALLADIUM CALCIUM CARBONATE 10% pd RXSOL-60-6605-166
PARAFFIN WAX 58 60C BLOCK BRICKS RXSOL-60-6605-180
P DIMETHYL AMINO BENZALDEHYDE AR RXSOL-60-6605-192
P DIMETHYL AMINO CINNAMALDEHYDE AR RXSOL-60-6605-193
PEPTONE BACTERIOLOGICAL GRANULAR RXSOL-60-6605-197
PETROLEUM ETHER 100-2000 C FOR SYNTHESIS RXSOL-60-6605-205
PHENOL RED INDICATOR SOLUTION RXSOL-60-6605-215
PHENOLDISULPHONIC ACID SOLUTION 25% RXSOL-60-6605-216
PHENOLPHTHALEIN INDICATOR RXSOL-60-6605-218
PHENYL CHLOROFORMATE FOR SYNTHESIS RXSOL-60-6605-219
PHENYL HYDRAZINE AR RXSOL-60-6605-220
PHENYL HYDRAZINE FOR SYNTHESIS RXSOL-60-6605-221
PHENYL HYDRAZINE HYDROCHLORIDE AR RXSOL-60-6605-223
PHENYL MERCURY ACETATE FOR SYNTHESIS RXSOL-60-6605-224
PHENYL PHOSPHATE DISODIUM SALT AR RXSOL-60-6605-226
PHENYL TRIMETHYL AMMONIUM CHLORIDE RXSOL-60-6605-227
PHLOXIN B FOR MICROSCOPY RXSOL-60-6605-229
PHTHALAMIDE FOR SYNTHESIS RXSOL-60-6605-237
PHTHALIC ACID AR RXSOL-60-6605-238
PHTHALIC ACID FOR SYNTHESIS RXSOL-60-6605-239
PHTHALIC ANHYDRIDE FOR SYNTHESIS RXSOL-60-6605-249
PHTHALIDE FOR SYNTHESIS RXSOL-60-6605-250
PHTHALIMIDE FOR SYNTHESIS RXSOL-60-6605-251
PICRIC ACID SOLUTION AR 1.2% RXSOL-60-6605-256
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPERAZINE Anhydrous 98% RXSOL-60-6605-257
PIPES BUFFER piperazine NN-Bis-2-Ethene Sulfonic acid RXSOL-60-6605-260
PLATINIUM OXIDE Pt 80% RXSOL-60-6605-261
POLYETHYLENE GLYCOL 600 RXSOL-60-6605-269
POLYVINYL PYRROLIDONE PVP RXSOL-60-6605-241
PONCEAU S FOR ELECTROPHORESIS RXSOL-60-6605-242
POPOP Scintillation Grade 1 4-bis5-phenyloxaza-2yl benzene RXSOL-60-6605-243
POPSO BUFFER FOR BIOCHEMISTRY RXSOL-60-6605-244
POTASSIUM ACETATE AR RXSOL-60-6605-245
POTASSIUM ACETATE LR RXSOL-60-6605-246
SODAMIDE RXSOL-60-6605-451
SODIUM ACETATE TRIHYDRATE AR RXSOL-60-6605-462
SODIUM ARSENITE SOLUTION AR 0.1N N10 RXSOL-60-6605-468
SODIUM BENZOATE AR RXSOL-60-6605-472
SODIUM BISELENITE Sodium Hydrogen Selenite RXSOL-60-6605-473
SODIUM BROMATE LR RXSOL-60-6605-481
SODIUM BROMIDE AR RXSOL-60-6605-482
SODIUM BROMIDE LR RXSOL-60-6605-483
SODIUM CHLORIDE SOLUTION0 85% wv RXSOL-60-6605-488
SODIUM CHROMATE TETRAHYDRATE LR RXSOL-60-6605-490
SODIUM DI CHLOROISOCYANURATE RXSOL-60-6605-495
SODIUM HYDROXIDE SOLUTION IN 1M N1 RXSOL-60-6605-519
SODIUM LAURYL SULPHATE AR 99% RXSOL-60-6605-529
SODIUM LAURYL SULPHATE POWDER LR RXSOL-60-6605-531
SODIUM META BORATE TETRAHYDRATE LR RXSOL-60-6605-534
SODIUM METHOXIDE AR RXSOL-60-6605-535
SODIUM METHOXIDE POWDER LR RXSOL-60-6605-536
SODIUM MOLYBDATE AR DIHYDRATE RXSOL-60-6605-537
SODIUM NITRITE AR RXSOL-60-6605-541
SODIUM NITRITE LR RXSOL-60-6605-542
SODIUM NITRO PRUSIDE AR RXSOL-60-6605-543
SODIUM NITRO PRUSIDE LR RXSOL-60-6605-544
SODIUM OXALATE AR RXSOL-60-6605-545
SODIUM PERBORATE TRIHYDRATE PURE RXSOL-60-6605-548
SODIUM PER CARBONATE GRANULAR RXSOL-60-6605-549
SODIUM PER CARBONATE TABLET RXSOL-60-6605-550
SODIUM PERSULPHATE AR RXSOL-60-6605-553
SODIUM PERSULPHATE LR RXSOL-60-6605-554
SODIUM PHOSPHATE DI BASIC DIHYDRATE RXSOL-60-6605-559
SODIUM PYRUVATE RXSOL-60-6605-562
SODIUM SALICYLATE AR RXSOL-60-6605-563
SODIUM SELENITE AR ANHYDROUS RXSOL-60-6605-566
SODIUM SELENITE LR ANHYDROUS RXSOL-60-6605-567
SODIUM SELENITE PENTAHYDRATE LR RXSOL-60-6605-568
SODIUM SILICATE POWDER META HYDRATED RXSOL-60-6605-569
SODIUM SILICATE SOLUTION RXSOL-60-6605-570
SODIUM SILICO FLUORIDE 99% RXSOL-60-6605-571
SODIUM STANNATE LR RXSOL-60-6605-572
SODIUM SULPHATE ANHYDROUS AR RXSOL-60-6605-573
SODIUM SULPHIDE FLAKES AR RXSOL-60-6605-576
SODIUM SULPHITE ANHYDROUS AR RXSOL-60-6605-577
SODIUM SULPHITE ANHYDROUS LR RXSOL-60-6605-578
SODIUM TELLURITE 96% RXSOL-60-6605-579
SODIUM Tert BUTOXIDE 98% RXSOL-60-6605-580
SODIUM THIOCYANATE AR RXSOL-60-6605-581
SODIUM THIOSULPHATE AR PENTAHYDRATE RXSOL-60-6605-583
SODIUM TRI POLYPHOSPHATE ANHYDROUS STPP RXSOL-60-6605-585
SODIUM TUNGSTATE DIHYDRATE RXSOL-60-6605-586
SODIUM TUNGSTATE DIHYDRATE AR RXSOL-60-6605-587
SODIUM B GLYCERO PHOSPHATE AR RXSOL-60-6605-588
SOYA LECITHIN 30% RXSOL-60-6605-592
SOYA PEPTONE SOYATONE RXSOL-60-6605-593
SPADNS AR RXSOL-60-6605-595
SPAN 20 Sorbitan Monolaurate RXSOL-60-6605-596
SPAN 60 Sorbitane Monostearate RXSOL-60-6605-598
SPAN 80 SORBITANE MONOOLEATE RXSOL-60-6605-599
STANNIC OXIDE AR RXSOL-60-6605-601
STANNIC OXIDE LR RXSOL-60-6605-602
Availability
SODIUM HYDROXIDE SOLUTION IN 1M N1 manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
SODIUM HYDROXIDE SOLUTION IN 1M N1 is available in small packing as well as in bulk. Buy premium quality SODIUM HYDROXIDE SOLUTION IN 1M N1 and other lab chemicals from one of the most trusted brands.
