RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Solvent Chemicals

ETHANETHIOL

Ethanethiol, commonly known as ethyl mercaptan, is an organosulfur compound with the formula CH3CH2SH. is a colorless liquid with a distinct odor. Abbreviated EtSH, it consists of an ethyl group (Et), CH3CH2, attached to a thiol group, SH. Its struct
Part number
RXSOL-19-3356-075
Brand
RXSOL
RXSOL

Overview

Ethanethiol, commonly known as ethyl mercaptan, is an organosulfur compound with the formula CH3CH2SH. is a colorless liquid with a distinct odor. Abbreviated EtSH, it consists of an ethyl group (Et), CH3CH2, attached to a thiol group, SH. Its structure parallels that of ethanol, but with sulfur in place of oxygen.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name               ETHANETHIOL
Part Number   RXSOL-19-3356-075

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA  

Phone +91 22 20871200 - 1400
Fax +91 22 27612100 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Website www.rxmraine.comA
Chemical  Name                            CAS                    EC number              Weight             Formula 
Ethanethiol 75-08-1 200-837-3 <= 100 %        C2H6S     
Signal Word  Danger
Hazard Statements H224 Extremely flammable liquid and vapor. H302 + H332 Harmful if swallowed or if inhaled. H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements   P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P273 Avoid release to the environment. P301 + P312 IF SWALLOWED: Call a POISON CENTER/ doctor if you feel unwell. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008.
Supplemental Hazard      Statements None.
Other hazards  This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Stench.
General advice Show this material safety data sheet to the doctor in attendance.
If inhaled  After inhalation: fresh air. If breathing stops: mouth-to-mouth breathing or artificial respiration. Oxygen if necessary. Immediately call in physician.
Eye Contact After eye contact: rinse out with plenty of water. Remove contact lenses.
Swallowed After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Skin Contact In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Inhalation Remove patient to fresh air, keep warm and at rest and get medical assistance in necessary. 
Ingestion Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms and effects, both acute and delaye The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed  No data available
Flammability                                                  Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Suitable extinguishing media Carbon dioxide (CO2) Foam Dry powder
Unsuitable extinguishing media For this substance/mixture no limitations of extinguishing agents are given.
Special hazards arising from the substance or mixture  Carbon oxides Sulfur oxides Combustible. Pay attention to flashback. Vapors are heavier than air and may spread along floors. Development of hazardous combustion gases or vapours possible in the event of fire. Forms explosive mixtures with air at ambient temperatures.
Further information Remove container from danger zone and cool with water. Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.
Hazardous combustion
products
Fire may cause the evolution of Sulphur oxides, nitrogen oxides.
Advice for firefighters In the event of fire, wear self-contained breathing apparatus.
Protective Equipment Use personal protective equipment.
Specific Hazards Arising from the Chemical Oxides of phosphorus Sodium oxides Not combustible. Fire may cause evolution of: Oxides of phosphorus Ambient fire may liberate hazardous vapours.
Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8.
Spillage Oxidizing material. Stop leak if without risk. Avoid contact with a combustible material (wood, paper, oil, clothing...). Keep substance damp using water spray. Do not touch spilled material. Prevent entry into sewers, basements or confined areas dike if needed. Eliminate all ignition sources. Call for assistance on disposal.
Enviromental Precaution Do not let product enter drains. Risk of explosion.
Methods and materials for
containment and cleaning
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area.
Advice on protection against fire and explosion Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge.
Incompatible materials  Keep away from alkalis, strong oxidizing agents and metals. Provide containment walls of adequate capacity to hold any accidental spills. 
Hygiene measures Change contaminated clothing. Preventive skin protection recommended. Wash hands after working with substance. For precautions see section 2.2.
Precautions for     safe handling Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
Storage conditions Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition.
Storage class Storage class (TRGS 510): 3: Flammable liquids
Specific end     use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated
Advice on general occupational hygiene Advice on safe handling Observe label precautions. Change contaminated clothing. Wash hands after working with substance.
Requirements for storage  Keep in cool and store under shade. 
Exposure controls  Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. 
Control parameters Ingredients with workplace control parameters Contains no substances with occupational exposure limit values.
Engineering Control Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
Body Protection Flame retardant antistatic protective clothing.
Skin protection This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Full contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested:Butoject® (KCL 898) This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: butyl-rubber Minimum layer thickness: 0,7 mm Break through time: 480 min Material tested:Butoject® (KCL 898)
Respiratory protection Required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type AX The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
Other Protection      Measure Handle in accordance with good industrial hygiene and safety practice.
Control of    environmental exposure Do not let product enter drains. Risk of explosion.
Physical state Clear, liquid
Colour Colorless
Odour Stench.
Odor Threshold No data available
pH No data available
Melting Point No data available
Boiling Point 35 °C - lit.
Flash Point -45 °C - closed cup
Evaporation Rate Not Applicable
Flammability (solid, gas) No data available
Explosive limits No Data Available
Upper/lower flammability or explosive limits 18,2 %(V) /  2,8 %(V)
Autoignition temperature No data available
Decomposition temperature  No data available
Vapour pressure 586,6 hPa at 20 °C 1.962,4 hPa at 55 °C
Density 0,839 g/cm3 at 25 °C - lit.                            
Relative  Density                                                     No data available
Relative vapor density 2,15 - (Air = 1.0)
Freezing point  No data available 
Viscosity No data available
Partition coefficient log Pow: 1,5 at 20 °C
Explosive properties No data available 
Solubility 6,8 g/l at 20 °C
Ignition temperature No information available.
Particle characteristics No data available 
Reactivity                        Vapors may form explosive mixture with air.
Stability The product is chemically stable under standard ambient conditions (room temperature) .
Possibility of hazardous reactions Risk of explosion with: Air Risk of ignition or formation of inflammable gases or vapours with: Nitric acid Oxidizing agents Powdered metals
Conditions to avoid Warming.
Incompatible materials No data available
Hazardous decomposition products In the event of fire: see section 5
Acute toxicity  LD50 Oral - Rat - 682 mg/kg Remarks: Behavioral:Muscle weakness. Behavioral:Ataxia. Cyanosis LC50 Inhalation - Rat - 4 h - 4420 ppm - vapor Remarks: Peripheral Nerve and Sensation:Spastic paralysis with or without sensory change. Behavioral:Excitement. Cyanosis Dermal: No data available
Skin corrosion/irritation Skin - Rabbit Result: Mild skin irritation - 24 h
Serious eye      damage/eye       irritation  Eyes - Rabbit Result: No eye irritation - 72 h
Respiratory or skin    sensitization  Maximization Test - Guinea pig Result: negative (OECD Test Guideline 406)
Toxic Effects on         Human May cause damage to the following organs: upper respiratory tract. Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant, sensitizer), of ingestion, of inhalation (lung irritant, lung sensitizer).
Carcinogenicity No data available
Germ cell        mutagenicity  Test Type: Ames test Test system: Escherichia coli/Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative
Reproductive toxicity  No data available
Specific target organ toxicity - single      exposure No data available
Endocrine disrupting properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: KI9625000 Nausea, Headache, Vomiting, prolonged or repeated exposure can cause:, narcosis To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Bioaccumulative potential Bioaccumulation Cyprinus carpio (Carp) - 41 d at 20 °C(Silver nitrate) Bioconcentration factor (BCF): 70
Persistence and            degradability Biodegradability aerobic - Exposure time 28 d Result: 27,1 % - Not readily biodegradable. (OECD Test Guideline 301D)
Toxicity to fish  NOEC - Oncorhynchus mykiss (rainbow trout) - < 1,7 mg/l - 96 h (OECD Test Guideline 203)
Toxicity to daphnia and other aquatic invertebrates Immobilization EC50 - Daphnia - < 0,1 mg/l - 48 h (OECD Test Guideline 202)
Toxicity to algae Static test ErC50 - Pseudokirchneriella subcapitata (green algae) - > 100 mg/l - 72 h (OECD Test Guideline 201) static test NOEC - Pseudokirchneriella subcapitata (green algae) - 100 mg/l - 72 h (OECD Test Guideline 201)
Toxicity to bacteria  EC50 - Photobacterium phosphoreum - 3.070 mg/l - 5 min Remarks: (IUCLID)
Mobility in soil No Information available
Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Endocrine disrupting       properties The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher.
Other adverse effects No data available.
Disposal methods The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging Dispose of as unused product.
Waste treatment      Method No data available
UN number ADR/RID: 2363                  IMDG: 2363              IATA:2363
UN proper shipping name

ADR/RID: ETHYL MERCAPTAN    

IMDG:ETHYL MERCAPTAN  

IATA:ETHYL MERCAPTAN

Transport hazard class(es) ADR/RID:     3                    IMDG:   3             IATA: 3
Packaging group ADR/RID:     I                     IMDG: I                IATA: I
Environmental hazards ADR/RID:  NO                    IMDG: NO            IATA: NO
Further information No data available                                                                                                                                  
Safety, health and environmental regulations/legislation specific for the substance or mixture This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical Safety Assessment For this product a chemical safety assessment was not carried out
National legislation Seveso III: Directive 2012/18/EU of the European Parliament and of the Council on the control of major-accident hazards involving dangerous substances. P5a FLAMMABLE LIQUIDS E1 ENVIRONMENTAL HAZARDS
Other regulations Observe work restrictions regarding maternity protection in accordance to Dir 92/85/EEC or stricter national regulations where applicable. Take note of Dir 94/33/EC on the protection of young people at work..
Other Information

The information above is believed to be accurate and represents the  best information   currently    available  to us.  However,   we   make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and  weassume  no liability resulting from its use. Users should make  their  own  investigations  to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International  has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

ETHANETHIOL manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of ETHANETHIOL at a competitive price from us. We have ready stock of ETHANETHIOL in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches