• Protect metal against corrosive cargo
• Protect paint against cargo penetration
• Environmentally friendly
• Safe to  use in occupied / covered areas
• Reduces turn around times
• Easy to direct spray
• If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
• Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
• And don’t forget procedures  have to be drown up and your
• Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time

RXSOL Boat Hull Cleaner strength resulting one step cleaning either its Gel Formula can be brush on or its liquid formula can be sprayed off on the entire boat or Hull area to remove sea growth and lime deposits. Its balance acidic formula immediately starts its function and Safe on aluminium boats and pontoons; Biodegradable, Non-flammable. 

TWO WAYS TO SPARKLING DISHES

* For tough grease, pour just one drop of RXSOL Dish Wash is a ideal solution on   scrub or sponge and apply on the utensil.
* For regular cleaning, dilute a few drop of RXSOL Dish Wash in a bowl of water.
* Dip the scrub or sponge in the solution and use. For re-use, just dampen the sponge and use when required.
* Washing with RXSOL leaves on scratches or residue on utensils.

PHYSICAL PROPERTIES

Rxsol -16-1007-025 is a concentrated hydrocaron based liquid mixture, non–corrosive with strong emulsifying agents and surfactants.

Appearance / Color : Clear, colorless liquid

Specific gravity         : 0.85 gr/cm3 at 15°C

Flash Point              : > 70°C

Odor                         : Aromatic Solvent

Feature and Benifit

• Non–corrosive and safe to use in all types andkinds of filters.

• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.

• Provides quick and efficient action.

• Its pure, high quality components readily remove oil and grease deposits, even when dry.

• Can be combined with a specific range of products.

• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.

• Attacks and dissolves water/oil emulsions and concentrations.

• Cost effective, easy to apply and use.

INSTRUCTIONS FOR USE:
Use of RXSOL-16-1095-025 is not restricted to a particular method of cleaning. Depending on the operating conditions, RXSOL-16-1095-025 can be used in a dip bath, in a spraying plant, in steam jetting or in manual application using a cloth, brush or sponge. It can be used warm or cold. RXSOL-16-1095-025 is miscible with water - even seawater.

Concentration for mesh cleaning: 1 : 2,5
Temperature: up to a maximum of 60 °C

The concentration depends on the type and thickness of the adhesive substance to be removed. When used in concentration below 1 : 30 rinsing is usually not required. No visible film remains on the surface


NOTE ::: Drained the automatic filter by automatic back-flushing (i.e. all filter chambers).
1 Then soak the filter element assembly, with the openings of the candle elements facing down in a suitable tank filled with RXSOL-16-1095-025 solvent.

2 The soaking time is completely depends on cleaning method :
a)In cold RXSOL-16-1095-025 cleaner the maximum soaking time is 24 hours.
b)In hot solution the maximum soaking time is 12 hours.


3. After soaking remove the whole filter element assembly from the tank and for dry to keep all parts on place it on a suitable perforated sheet metal.

4. Then you may blow compressed air through the candles from the inside to the outside.

5. After this procedure the complete filter element assembly should be immersed in fresh cleaner, with the candle element opening down-wards, and rinsed through with an up and down motion.

6 Allow the filter element assembly to drain again and dry it by blowing compressed air through it again from the inside to the outside. The manual cleaning procedure described here has produced adequate results (ca. 60 % clean) in similar applications.

Note : CLEANING of filter can be enhance with high pressure machine.

RXSOL-16-1095-025  is a fluid cleaning and degreasing agent with a wide range of application. It can be used for practically all cleaning and degreasing purposes.
RXSOL-16-1095-025 cleans rapidly, thoroughly and extremely economically.
Use of RXSOL-16-1095-025 renders safety precautions superfluous.
RXSOL-16-1095-025 has these outstanding characteristics without exhibiting the
isadvantages of solvent cleaners.

RXSOL-16-1095-025 is non-flammable and free from caustic

This product is biologically degradable

RXSOL-16-1095-025  can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.