API Test Calibration Bentonite
- Part number
- RXSOL-60-6288-500
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
API Test Calibration Bentonite manufacturer and supplier
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
API Test Calibration Bentonite |
| Product Type | RXSOL-60-6288-500 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat, Nairoabi
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9322594669 |
| rxsolchemicals@gmail.com |
| SARA 313 | Component | CAS Number |
Percent Comp. |
Dimension |
Exposure Limits |
| Silica, Crystalline Quartz | CAS# 14808-60-7 | 2 - 15% | W/W |
OSHA PEL 0.1 mg/m3 ACGIH TLV 0.1 mg/m3 |
|
| Silica, Crystalline Cristobalite | CAS# 14464-46-1 | 2 – 12% | W/W |
OSHA PEL 0.05 mg/m3 ACGIH TLV 0.05 mg/m3 |
|
| Silica, Crystalline Tridymite | CAS# 15468-32-3 | < 2% | W/W |
OSHA PEL 0.05 mg/m3 ACGIH TLV 0.05 mg/m3 |
|
| Gypsum | CAS# 13397-24-5 | 1% | W/W |
OSHA PEL 5 mg/m3 ACGIH TLV 10 mg/m3 |
|
Emergency Overview |
Warning! Contains crystalline silica, inhalation of which may cause cancer. Wear proper respiratory protective equipment. May cause mechanical eye, skin and respiratory irritation. Avoid contact with eyes or skin. Avoid breathing dust. |
|
Inhalation |
May result in distress in breathing, coughing and irritation of the upper respiratory system. |
|
Ingestion |
May cause mild stomach upset |
|
Skin |
May cause mechanical irritation |
|
Eye Contact |
May cause mechanical irritation |
|
Chronic Exposure |
Unprotected prolonged inhalation of dust containing crystalline silica may cause permanent lung and liver injury. Limited evidence (IARC) shows that the inhalation of crystalline silica causes cancer in humans. |
|
Aggravated by Exposure |
No information found |
|
SKIN |
Wash with mild soap and water. Apply medicated creams to relieve irritation and replenish skin oils. |
|
EYES |
Flush eyes with water 15 minutes. Consult a physician if irritation persists. |
|
INHALATION |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
|
INGESTION |
Give fluids to rinse mouth and throat and to dilute. Consult a physician if adverse symptoms develop |
Fire Extinguisher Type: Any means suitable for extinguishing surrounding fire
Fire/Explosion Hazards: Noncombustible. Material may produce sodium oxide and carbon dioxide at decomposition temperatures.
Firefighting Procedure: Compatible with agents used to extinguish surrounding fires. Water-wet product may be slippery.
Wear proper protective equipment (Section 8). Recover spilled material to the original container if possible or to a suitable waste container. Minimize dusting during cleanup. Flush residue with water.
Store in a dry place. Keep dusts to a minimum. Keep container closed when not in use. Use adequate ventilation.
|
Respiratoryprotection |
An approved particulate respirator if exposure limits may be exceeded. |
|
Ventilation |
Local Exhaust |
|
Protective gloves |
Wear cloth, neoprene or rubber gloves to prevent mechanical irritation. |
|
Eye protection |
Chemical safety goggles or glasses with side shields |
|
Other protective equipment |
Wear long protective clothing with an apron to keep dust off clothes. |
|
Melting Point |
Not applicable |
Percent Volatile By Volume |
Not applicable |
|
Boiling Point |
Not applicable |
Evaporation Rate |
Not applicable |
|
Vapor Pressure |
Not applicable |
Evaporation Standard |
|
|
Vapor Density |
Not applicable |
Auto Ignition Temp |
Not applicable |
|
Solubility In Water |
Insoluble |
Lower Flamm. Limit In Air |
Not applicable |
|
Appearance/Odors |
Tan, Odorless |
Upper Flamm. Limit In Air |
Not applicable |
|
Flash Point |
Not applicable |
Specific Gravity |
2.6 |
|
Stability |
Stable |
|
Conditions to Avoid |
None |
|
Materials to Avoid |
None |
|
Hazardous Decomposition Products |
None |
|
Hazardous Polymerization |
Will not occur |
|
Conditions to Avoid |
None known |
Limited evidence (IARC) shows that the inhalation of crystalline silica causes cancer in humans.
No information found
Product is not hazardous according to RCRA criteria or listing as supplied. Dispose of in accordance with local, state and federal regulations dealing with a waste nonhazardous product.
DOT Classification: Not regulated
DOT regulations: may change from time to time. Please consult the most recent DOT regulations.
No information found
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
API Test Calibration Bentonite manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of API Test Calibration Bentonite at a competitive price from us. We have ready stock of API Test Calibration Bentonite in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
