RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,087 products across 102 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Tank Cleaner

Acetone Tech Grade 210 Ltr

Acetone pure grade available in 500 ml packing to 210 Ltr sealed drum packing.
Part number
RXSOL-20-2104-210
Category
Tank Cleaner
Brand
RXSOL
Acetone Tech Grade 210 Ltr

Overview

Acetone pure grade available in 500 ml packing to 210 Ltr sealed drum packing.  RXSOL brand is most popular brand as supplier of highly purified, research grade solvents. RXSOL pure acetone are available at Kolkata, Haldia, Mumbai - Maharastra, Kandla, Gandhidham, Surat, Manglore, Vizag, Chennai and Middle East - UAE.

Technical specifications

ACETONE

Test

Unit

Method

Results

Purity

wt%

GC

min. 99.5

Density at 20ºC

kg/l

ASTM D 4052

0.790-0.792

Water

wt%

BS 2511

max. 0.3

Acidity (as Acetic Acid)

wt%

BS509

max. 0.002

Appearance

 

Visual

1)

Distillation range at 750 mmHg

 

BS 509

 

I.B.P.

ºC

 

min. 55.8

D.P.

ºC

 

max. 56.6

Alcoholic impurities

 

BS 509

2)

Alkalinity

 

BS 509

2)

Colour

Pt/Co

ASTM D 1209

max. 5

Parrmanganate time

min.

BS 509

min. 180

Residue on evaporation

wt%

BS 4524

max. 0.001

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet

Product Name RXSOL-20-2104-210
Product Type   Acetone Tech Grade

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com

Chemical Name

CAS Number

EC Number

Index number

acetone

67-64-1

200-662-2

606-001-00-8

Hazard description:
Information concerning particular hazards for human and environment:
At long or repeated contact with skin it may cause dermatitis due to the degreasing effect of the solvent.
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.

After inhalation

Supply fresh air; consult doctor in case of complaints.

After skin contact

Generally the product does not irritate the skin.

After eye contact

Rinse opened eye for several minutes under running water.If symptoms persist, consult a doctor.

After swallowing

If symptoms persist consult doctor.

Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Protective equipment: No special measures required.

Person-related safety precautions: Wear protective equipment. Keep unprotected persons away.
Measures for environmental protection: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Dilute with plenty of water. Ensure adequate ventilation.

Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Storage:
Requirements to be met by storerooms and receptacles: Store in a cool location.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles

Additional information about design of technical facilities: No further data; see item 7.

Ingredients with limit values that require monitoring at the workplace:
67-64-1 acetone

PEL (USA)

REL (USA)

TLV (USA)
WEL (Great Britain)


2400 mg/m³, 1000 ppm
590 mg/m³, 250 ppm
Short-term value: 1782 mg/m³, 750 ppm
Long-term value: 1188 mg/m³, 500 ppm
BEI
1210 mg/m³, 500 ppm
Short-term value: 3620 mg/m³, 1500 ppm
Long-term value: 1210 mg/m³, 500 ppm

Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work. Avoid contact with the eyes.Avoid contact with the eyes and skin.
Respiratory protection: Use suitable respiratory protective device in case of insufficient ventilation.
Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.

Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be   observed.
Eye protection: Tightly sealed goggles

General Information

Form

Fluid

Colour

Colourless

Odour

Characteristic

Change in condition

Melting point/Melting range

94.7°C

Boiling point/Boiling range

55.8-56.6°C

Flash point

< -18°C

Ignition temperature 465°C

Danger of explosion

Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Explosion limits:
Lower 2.6 Vol %
Upper 13 Vol %
Vapour pressure at 20°C 233 hPa
Density at 20°C 0.79 g/cm³
Solubility in / Miscibility with water Fully miscible.
Viscosity:
Dynamic at 22°C 32 mPas

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.

Acute toxicity:
LD/LC50 values relevant for classification:  

Oral

Inhalative

LD50

LC50/4 h

5800 mg/kg (rat)

20000 mg/kg (rabbit)

Primary irritant effect:
on the skin No irritant effect.
on the eye No irritating effect.
Sensitization No sensitizing effects known.

General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

Product:
• Recommendation
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
• Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

Land transport ADR/RID (cross-border)
  ADR/RID class 3 Flammable liquids.
  Danger code (Kemler) 33
  UN-Number 1090
  Packaging group II
  Hazard label 3
  Description of goods 1090 ACETONE
Maritime transport IMDG
  IMDG Class 3
  UN Number 1090
  Label 3
  Packaging group II
  EMS Number F-A,S-D
  Marine pollutant No
  Proper shipping name ACETONE
Air transport ICAO-TI and IATA-DGR
  ICAO/IATA Class 3
  UN/ID Number 1090
  Label 3
  Packaging group II
  Proper shipping name ACETON

• Labelling according to EU guidelines:
The product has been classified and marked in accordance with EU Directives / Ordinance on Hazardous Materials.
• Risk phrases:
11 Highly flammable.
36 Irritating to eyes.
66 Repeated exposure may cause skin dryness or cracking.
67 Vapours may cause drowsiness and dizziness.
• Safety phrases:
2 Keep out of the reach of children.
9 Keep container in a well-ventilated place.
16 Keep away from sources of ignition - No smoking.
26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Acetone Tech Grade manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Acetone Tech Grade at a competitive price from us. We have ready stock of Acetone Tech Grade in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches