Activated Alumina Powder Absorbent and Catalyst
- Part number
- RXSOL-24-1905-020
- Category
- Coolant Glycol Antifreeze
- Brand
- RXSOL
Overview
Alumina is supplied as spray-dried powder. This product has high surface area and high acid dispersibillities and the dispersed alumina suspension of sols serve as an excellent binding agent.
Technical specifications
Chemical Analysis ( Nominal )
| Na2O(wt%) | 0.05 |
| SiO2(wt%) | 0.07 |
| Fe2O3(wt%) | 0.01 |
| Cl(wt%) | 0.10 |
| Loss on Ignition(wt%) | 28 |
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
|
rxsolchemicals@gmail.com |
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 | |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 | |
|
rxsolchemicals@gmail.com |
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
|
rxsolchemicals@gmail.com |
Applications
Characteristics and notes
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-24-1905-020 |
| Product Type | Potassium Permanganate Impregnated Alumina |
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
Company Details:
RX MARINE INTERNATIONAL
105, A wing, BSEL, TECH PARK.
VASHI, NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
DANGEROUS INGREDIENTS
|
COMPONENTS |
CAS NO. |
%BY WEIGHT |
ACGIH TLB | OSHA PEL |
| Aluminum oxide | 1333-84-2 | <97% | N/D | 15 (total dust), |
| Aluminum silicate | 14504-95-1 | <0.2% | N/D | 5 (respirable) mg/m3 |
| Potassium Permagnate | 7722-64-7 | PROPRIETORY BLEND |
|
EYES: |
Can cause mild irritation, especially when wet. |
|
SKIN: |
Can cause mild irritation. |
|
INHALATION: |
Can cause mild upper respiratory tract irritation. |
|
INGESTION: |
Can cause mild irritation. |
|
EYES: |
Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician. |
|
SKIN: |
Wash with soap and water for at least 15 minutes. Consult a physician if irritation persists. |
|
INHALATION: |
Remove to fresh air. Check for clear airway, breathing, and presence of pulse. Provide CPR for persons without pulse or respirations. Consult a physician. |
|
INGESTION: |
If swallowed, dilute by drinking large amounts of water. Never give,anything by mouth to a convulsing or unconscious person. Do not induce vomiting. Consult a physician. |
| SUITABLE EXTINGUISHING AGENTS: |
Use fire fighting measures that suit the environment. |
|
PROTECTIVE EQUIPMENT: |
Wear self-contained respiratory protective device. Wear fully protective suit. |
|
ACCIDENTAL RELEASE MEASURES: |
Person-related safety precautions: Wear protective clothing. |
N/A
|
HANDLING: |
Ensure good ventilation/exhaust at the workplace. Prevent formation of dust. Provide suction extractors if dust is formed. |
|
Protection against explosions and fires: |
No special measures required. |
|
STORAGE: |
Keep material dry. Storage in one common storage facility is not required. |
Personal protective equipment. Do not inhale dust. Avoid contact with the eyes. Use suitable respiratory protective device in case of insufficient ventilation. Short term filter device: Filter P2. Protection of hands: impervious gloves. Eye protection: Safety glasses.
| APPEARANCE: | Off-white, crystalline or gelatinous granules, pellets/powder. |
| BOILING POINT: | Undetermined |
| FREEZING POINT: | 3,700°F (2038°C) |
| VAPOR PRESSURE: | Not applicable |
| AUTOIGNITING: | Product is not self igniting |
| SPECIFIC GRAVITY: | 3.2 |
| DENSITY: | Loose Bulk: 39-52 lb/ft (0.62-0.83 g/cm ). |
| pH: | 10% in water 9.4-10.1 |
| ODOR: | Characteristic |
|
CHEMICAL STABILITY CONDITIONS TO AVOID |
A rise in temperature may result from contact with water. |
|
INCOMPATIBILITY |
None. |
|
HAZARDOUS DECCSIPOSITION PRODUCTS |
None if used according to specifications. |
| HAZARDOUS POLYMERIZATION: |
None. Non-corrosive. |
N/A
N/A
Collect in containers, bags, or covered dumpster boxes. If reuse or recycling is not possible, material may be disposed of at an industrial landfill.
Waste disposal key: 16 03 01 513 05
Disposal must be made according to official regulations.
N/A
NA
the above information is accurate to the best of our knowledge.however, since data, safety standards, and government regulations are subject
to change and the conditions of handling and use, or misuse, are beyond our control, seller makes no warranty, either express or implied, with
respect to the completeness or continuing accuracy of the information contained herein and disclaims all liability for reliance thereon. User
should satisfy himself that he has all current data relevant to his particular use.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Activated Alumina Powder Absorbent and Catalyst manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Activated Alumina Powder Absorbent and Catalyst at a competitive price from us. We have ready stock of Activated Alumina Powder Absorbent and Catalyst in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
