RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,082 products across 97 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Laundry Chemicals

All Purpose Spot and Stain Remover

RXSOL spot remover effectively removes most protein based spots and spills
Part number
RXSOL-41-8776-025
Brand
RXSOL
All Purpose Spot and Stain Remover

Overview

RXSOL spot remover effectively removes most protein based spots and spills. Spotter is an environmentally friendly, water based, all-purpose spotting solution.

Applications

RXSOL Spotter safely and effectively remove all type of spots, spills, and stains from carpets and fabrics. 

Dosage and directions

RXSOL Spotter will effectively treat and remove almost all common household spills and stains. Perky Spotter is non-toxic, non-flammable, and uses environmentally green ingredients. it will provide professional results against most foods, hot and cold drinks, tar, animal accidents, blood, grease, cosmetics and more.

Characteristics and notes

Various grade of  Wet-side Spotting Agents
Wet-side pre-cleaning/spotting agents are used to clean water soluble stains from clothing. Wet-side agents can be subdivided into three different classes: neutral, alkaline, and acidic.
 
Neutral Wet-Side Agents – Neutral spotting agents include water and neutral synthetic detergents (which contain surfactants). These agents are used to remove water-soluble stains, food, beverages and water-soluble dyes.
 
Alkaline Wet-Side Agents – Alkaline spotting agents include lye, ammonia, potassium hydroxide, sodium hydroxide and so-called protein formula home detergents. Protein formula detergents contain digester enzymes - Amylase, Cellulase, Lipase and Protease. Digesters can be used to remove: starch, cellulose, fats and oils, and protein stains.
 
Acidic Wet-Side Agents – Acid agents include acetic acid, hydrofluoric acid, oxalic acid, glycolic acid and sulfuric acid. Tannin or plant-based stains can be removed with wet-side spotting agents also known as tannin formula agents. 

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name

All Purpose Spot and Stain Remover

Product Type RXSOL-41-8776-025

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

BRANCH : Fujairah, Mumbai, Kandla, Chennai, Kolkata, Visakhapatnam

Phone +91 22 27815540 / 41 / 42
Fax +91 22 2781 1318 :::AOH :0091 9322594669
Email rxsolchemicals@gmail.com


COMPONENTS                           CAS NUMBER                              %TLV

There are no components contained in this material that are considered hazardous under 29CFR1 910.1200.

EMERGENCY OVERVIEW

Physical Properties: clear solution with mild odor

IMMEDIATE HEALTH EFFECTS

Eyes: Overexposure may cause irritation to eyes.

Skin: Prolonged and repeated contact may cause irritation to skin.

Inhalation: Inhalation may cause irritation of upper respiratory passages.

Ingestion: Single dose oral toxicity is low. Swallowing large amounts may be harmful. 

PRIMARY ROUTES OF ENTRY: Eyes, skin contact/absorption, inhalation or ingestion.

SIGNS/SYMPTOMS OF OVEREXPOSURE: Gastrointestinal irritation (nausea, vomiting, diarrhea), and/or irritation to the skin, eyes, nose, throat, and respiratory tract.

TARGET ORGAN EFFECTS: Irritation of the skin and eyes. Irritation of lungs possible if mists/aerosols are inhaled.

REPRODUCTIVE/DEVELOPMENTAL INFORMATION: No data available.

CARCINOGENIC INFORMATION: None of the ingredients of this material are listed as carcinogens by IARC, NTP, or OSHA.

LONG TERMEFFECTS: No data available.

EYES: Flush eyes with water for at least 15 minutes. If irritation persists, consult a physician.

SKIN: If irritation occurs, flush skin with water for at least 15 minutes. If irritation persists, consult a physician

INHALATION: If symptoms of overexposure develop, remove to fresh air. If symptoms persist, consult a physician.

INGESTION: Give 8 to 16 ounces of water to dilute substance. Do not induce vomiting. Consult a physician or local Poison Control Center. Never give anything by mouth to an unconscious person.

FLASHPOINT (° Fahrenheit): No flash below boil.

EXPLOSIVE LIMITS: No data available.

AUTOIGNITION TEMPERATURE: No data available.

HAZARDOUS PRODUCTS OF COMBUSTION: In the event of fire, the following may be released: Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.

EXTINGUISHING MEDIA: Water spray, foam, dry chemical powder of carbon dioxide.

FIRE FIGHTING INSTRUCTIONS: Firefighters should wear proper protective equipment and self-contained breathing apparatus with full facepiece operated in positive pressure mode. Move containers from fire area if it can be done without risk. Use water to keep fireexposed containers cool.

NFPA/HMIS RATINGS: Health: 1, Flammability: 0, Reactivity: 0

Contain with chemical absorbent material. Do not dispose of on the land, in surface waters, or in stormdrains. Small spills and waste may be flushed into a waste treatment sewer where local regulations permit. Larger quantities should be collected for reuse or consigned to a licensed hazardous waste hauler for disposal in accordance with federal, state and local regulations. All disposal must be in accordance with all federal, state and local regulations.

HANDLING: Handle and open containers with care.

STORAGE: Store in a cool, well ventilated place away from incompatible materials.

Respiratory Protection: None normally needed.

Protective Clothing : None normally needed.

Eye Protection : None normally needed.

Ventilation: Normal room ventilation should suffice

Storage: Store above 5 5oF. Store out of reach of Children. Keep container tightly closed

APPEARANCE AND ODOR: Clear, solution/ no odor
pH: 9.5
VAPOR PRESSURE: No data available.
VAPOR DENSITY: No data available

BOILING POINT:

212o F
SOLUBILITY IN WATER: Soluble
EVAPORTATION RATE: (water = 1) approximately 1

DENSITY:

1.028

CHEMICAL STABILITY: Stable.

CONDITIONS TO AVOID: None with proper storing and handling.

MATERIALS TO AVOID: Strong oxidizing materials.

HAZARDOUS DECOMPOSITION: Upon combustion, the following may be produced:

Carbon dioxide and/or carbon monoxide, oxides of nitrogen and sulfur.

HAZARDOUS POLYMERIZATION: Will not occur.

ROUTES OF EXPOSURE: Skin absorption, eye contact, inhalation, and ingestion.

CARCINOGENITY: None of the components of this material are listed as carcinogens by IARC, NTP, or OSHA.

TERATOGINICITY, MUTAGENICITY, OR OTHER REPRODUCTIVE EFFECTS: No data available.

CONDITIONS AGGREVATED BY EXPOSURE: No data available.

SYNERGISTICMATERIALS: No data available. 

ROUTES OF EXPOSURE: Skin absorption, eye contact, inhalation, and ingestion.

CARCINOGENITY: None of the components of this material are listed as carcinogens by IARC, NTP, or OSHA.

TERATOGINICITY, MUTAGENICITY, OR OTHER REPRODUCTIVE EFFECTS: No data available.

CONDITIONS AGGREVATED BY EXPOSURE: No data available.

SYNERGISTICMATERIALS: No data available.

WASTE DISPOSAL INFORMATION: Dispose in accordance with all applicable federal, state, and local regulations.

RCRA INFORMATION: If this material becomes a waste, it would not be considered hazardous under 40CFR26 1.

 

DOT INFORMATION – 49CFR172.101

Proper shipping name: Compounds, cleaning, liquid – NOS

DOT Hazardous Class: Non hazardous

Hazardous Components: None

REPORTABLE QUANTITY– 49CFR172.101: Not applicable 

US FEDERAL REGULATIONS

TSCA Status: The intentional components of this product are listed.

CERCLA Reportable Quantities – 40CFR355 APPENDIX A: None.

SARA 313 – 40CFR372.65: None.

STATE AND LOCAL REGULATIONS

CALIFORNIA PROPOSITION 65: None

MASSACHUSETTS: None

NEW JERSEY: None

PENNSYLVANIA: None

None.
While this information and recommendations set forth herein are believed to be accurate and reliable, it is provided without warranty regarding its accuracy. RXSOL group companies MAKES NO WARRANTY WITH RESPECT HERETO AND DISCLAIMS ALL LIABILITY FROM RELIANCE THEREON. Users must determine safe conditions for use and assume liability for any loss, injury, damage or expense resulting from use of this product. 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

All Purpose Spot and Stain Remover manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of All Purpose Spot and Stain Remover at a competitive price from us. We have ready stock of All Purpose Spot and Stain Remover in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Our stock points and branches