Aluminium Phosphate Gel
- Part number
- RXSOL-19-1172-050
- Category
- Medicine
- Brand
- RXSOL
Overview
Active Pharmaceutical Ingredients, such as Dried Aluminium Hydroxide Gel, Aluminium Phosphate Gel, Magnesium Trisilicate, Magnesium Hydroxide etc. The company offers its product in Paste, Spray Dried Powder and Micronized M50 Powder form. The Micronized M50 products are being successfully used in manufacture of liquid antacid formulations in place of conventional paste. The Micronized M50 product has several advantages and is also commercially attractive as well. In addition to the catering of Pharma requirement the company also make product for food colour (for manufacture of Lake Colour). The company also take up specialized Job Works which uses Aluminium Chloride Anhydrous as input which comes out as waste stream such as in Friedel Craft Reactions.
Applications
Prepared by exposing soluble aluminium salts to alkaline conditions and contains hydrated aluminium orthophosphate with the formula AlPO4.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Porduct Name | Aluminium Phosphate Gel |
| Part Number | RXSOL-19-1172-050 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Weight | Formula |
| Aluminum phosphate | 7784-30-7 | 232-056-9 | 121,95 g/mol | AlO4P |
| Signal Word | No data available |
| Hazard Statements | No data available |
| Precautionary statements | No data available |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| General advice | No data available |
| If inhaled | After inhalation fresh air. |
| Eye Contact | Rinse out with plenty of water. Remove contact lenses |
| Swallowed | Make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Skin Contact | In case of skin contact Take off immediately all contaminated clothing. Rinse skin with water/ shower. |
| Inhalation | No data available |
| Ingestion | No data available |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | No data available |
| Flammability | No data available |
| Suitable extinguishing media | Water Foam Carbon dioxide (CO2) Dry powder |
| Unsuitable extinguishing media | For this substance/mixture no limitations of extinguishing agents are given |
| Special hazards arising from the substance or mixture | Oxides of phosphorus Aluminum oxide Combustible. Development of hazardous combustion gases or vapours possible in the event of fire |
| Further information | Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system. |
|
Hazardous combustion products |
No data available |
| Advice for firefighters | In the event of fire, wear self-contained breathing apparatus. |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | Advice for non-emergency personnel: Do not breathe vapors, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert. For personal protection see section 8. |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | Do not let product enter drains. Risk of explosion. |
|
Methods and materials for containment and cleaning |
Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up with liquid-absorbent material (e.g. Chemizorb® ). Dispose of properly. Clean up affected area |
| Reference to other sections | For disposal see section 13 |
| Advice on protection against fire and explosion | No data available |
| Incompatible materials | No data available |
| Hygiene measures | No data available |
| Advice on safe handling | No data available |
| Conditions for safe storage, including any incompatibilities |
No data available |
| Storage conditions | Tightly closed. Dry. |
| Storage class | Storage class (TRGS 510) 13 Non Combustible Solids |
| Specific end use(s) | Apart from the uses mentioned in section 1.2 no other specific uses are stipulated |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | No data available |
| Eye/face protection | Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses |
| Body Protection | Protective clothing. |
| Skin protection | This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). Splash contact Material: Viton® Minimum layer thickness 0,7 mm Break through time: 60 min Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M) |
| Respiratory protection |
Required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P1 The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented
|
| Other Protection Measure | No data available |
| Physical state | Crystals with lumps |
| Colour | Beigewhite |
| Odour | Ether-like |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | > 450 °C - Regulation (EC) No. 440/2008, Annex, |
| Boiling Point | No data available |
| Flash Point | No data available |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | The product is not flammable. |
| Explosive limits | No data available |
| Upper/lower flammability or explosive limits | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | No data available |
| Density | 2,56 g/mL at 25 °C - lit. |
| Relative Density | No data available |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | 6,92 g/l at 20 °C - Regulation (EC) No. 440/2008, Annex, A.6- slightly soluble |
| Ignition temperature | No data available |
| Particle characteristics | No data available |
| Reactivity | The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. |
| Chemical stability | The product is chemically stable under standard ambient conditions (room temperature) |
| Possibilityof hazardous reactions | Violent reactions possible with Strong bases |
| Condition to avoid | No data available |
| Incompatible materials |
No data available
|
| Hazardous product dicomposition | No data available |
| Acute toxicity | LD50 Oral - Rat - female - > 2.000 mg/kg (OECD Test Guideline 420) LC50 Inhalation - Rat - male and female - 4 h - > 5,1 mg/l - dust/mist (OECD Test Guideline 403) |
| Skin corrosion/irritation | Skin - Rabbit Irritations - 4 h (OECD Test Guideline 404) Remarks: Repeated or prolonged exposure may cause skin irritation and dermatitis, due to degreasing properties of the product |
| Serious eye damage/irritation | Eyes - Rabbit Eye irritation (ECHA) Risk of corneal clouding. |
| Respiratory or skin sensitization | Local lymph node assay (LLNA) - Mouse |
| Carcinogenicity | Suspected of causing cancer. |
| Germ cell mutagenicity | Test Type Ames test Test system: Escherichia coli/Salmonella typhimurium Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 471 Result: negative Test Type: In vitro mammalian cell gene mutation test Test system: mouse lymphoma cells Metabolic activation: with and without metabolic activation Aldrich- 255963 Page 7 of 10 The life science business of Merck operates as MilliporeSigma in the US and Canada Method: OECD Test Guideline 476 Result: negative Test Type: Mutagenicity (mammal cell test): chromosome aberration. Test system: Human lymphocytes Metabolic activation: with and without metabolic activation Method: OECD Test Guideline 473 |
| Reproductive toxicity | No data available |
| Specific target organ toxicity-single exposure |
No data available
|
| Additional Information | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. RTECS: TB6450000 Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin., Cough, Shortness of breath, Headache, Nausea To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated |
| Persistence and degradability | The methods for determining biodegradability are not applicable to inorganic substances |
| Toxicity to fish | No data available |
| Toxicity to daphnia and other aquatic invertebrates | No data available |
| Toxicity | No data available |
| Toxicity to bacteria | No data available |
| Toxicity to algae | Satic test ErC50 - Desmodesmus subspicatus (green algae) - > 100 mg/l - 72 h (OECD Test Guideline 201) |
| Bioaccumulation potential | No data available |
| Mobility in soil | No data available |
| Results of PBT av PvB assessment | This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. |
| Endocrine disrupting properties | The substance/mixture does not contain components considered to have endocrine disrupting properties according to REACH Article 57(f) or Commission Delegated regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at levels of 0.1% or higher. |
| Other adverse effects | No data available |
| Product | No data available |
| Contaminated packaging | No data available |
| Waste treatment Method | No data available |
| UN number | ADR/RID:- | IMDG:- | IATA:- |
| UN proper shipping name | ADR/RID:Not dengerous goods | IMDG:Not dengerous goods | IATA:Not dengerous goods |
| Transport hazard classess | ADR/RID:- | IMDG:- | IATA:- |
| Packaging group | ADR/RID:- | IMDG:- | IATA:- |
| Environmental hazards | ADR/RID:No | IMDG:No | IATA:No |
| Special precautions for user | No data available | ||
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006 |
| Other regulations | No data available |
| Chemical Safety Assessment | For this product a chemical safety assessment was not carried out |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
