Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6227-100 |
| Product Type | Aniline Solution |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Aniline | CAS# 62-53-3 | 100% | V/V |
OSHA TWA 5 ppm (19 mg/mƒ) |
May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with adequate ventilation. Wash thoroughly after use. Keep container closed.
Emergency Overview:Danger! May be fatal if swallowed, inhaled or absorbed through skin.
Causes irritation to skin, eyes and respiratory tract. Combustible liquid and vapor. May cause methemoglobinemia. Affects blood, cardiovascular system, central nervous system, liver and kidneys. Toxic. Affects ability of blood to carry oxygen. Symptoms may include bluish discoloration of lips and tongue, severe headache, nausea, confusion, dizziness, shock, respiratory paralysis, death.
Inhalation:Toxic. Lethal dose may be as little as one gram. Symptoms of ingestion parallel those of inhalation exposure.
Ingestion:May be absorbed through skin. Symptoms of skin absorption parallel those of inhalation exposure.
Skin:Vapor is an eye irritant. May cause tearing, blurred vision. Splashes may cause corneal
damage.
Eye Contact:Aniline is a blood toxin, causing hemoglobin to convert to methemoglobin, resulting
in cyanosis.
Chronic Exposure:Lengthy or repeated exposures may result in decreased appetite, anemia,
weight loss, nervous system affects, and kidney, liver and bone marrow damage. Any exposure may cause an allergic skin reaction.
Aggravated by Exposure:Persons with pre-existing skin disorders or eye problems or impaired
liver or kidney function may be more susceptible to the effects of the substance.
May be fatal if inhaled, swallowed or absorbed thru the skin Avoid all contact. Use with
adequate ventilation. Wash thoroughly after use. Keep container closed.
|
SKIN: |
Remove contaminated clothing. Wash exposed area with soap and water. |
| EYES: |
Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. |
| INHALATION: |
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: |
If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person. |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing |
| Fire / Explosion Hazards: |
Fire possible at elevated temperatures. Dust in sufficient quantities can form explosive mixtures with air. |
| Fire Fighting Procedure: |
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Evacuate area. Ventilate area and remove ignition sources. Contain and recover when possible.
Ventilate area or leak or spill. Remove all sources of ignition.Wear appropriate personal protective equipment as specified in section 7. Isolate hazard area.Keep unnecessary and unprotected personnel from entering. Contain and recover liquid when possible. Use nonsparking tools and equipment. Collect liquid in an appropriate container or absorb with an Inert material (e.g., vermiculite, dry sand, earth), and place in a chemical waste container. Do not use combustible materials, such as saw dust. Do not flush to sewer! Us regulations (CERCLA) require reporting spills and releases to soil, water and air in excess of reportable quantities.
Store in a cool dry dark place. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling
|
Respiratory Protection |
Organic Vapor Cartridge |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | NIOSH Approved Gloves |
| EYE PROTECTION | Splash Goggles |
| Other Protective Equipment |
Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | 184°C |
| VAPOR PRESSURE | 1mm @34.8°C |
| MELTING POINT | -6°C |
| VAPOR DENSITY | 3.22 |
| EVAPORATION RATE | Information not available |
| Appearance /Odors |
Clear,light red liquid / characteristic odor |
| Flash Point | 70°C |
| Specific Gravity | 1.02 |
| Percent Volatile by | Information not available |
| Evaporation Standard | |
| Auto Ignition Temp |
1139°C |
| Lower Flamm. Limit in Air |
Information not available |
| Upper Flamm. Limit in Air | Information not available |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Heat, Air, Light |
|
MATERIALS TO AVOID |
Oxidizing materials |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Carbon and Nitrogen Oxides, HCL and |
|
HAZARDOUS POLYMERIZATION |
Will Not Occur |
| Conditions to Avoid | None known |
NTP Carcinogen - Known: No, IARC Category- 3
Environmental Fate:When released into the soil, this material is expected to readily biodegrade. When released into the soil, this material may leach into groundwater. When released into the soil, this material may evaporate to a moderate extent. When released into water, this material is expected to readily biodegrade. When released into water, this material is expected to have a half-life between 10 and 30 days.This material has an experimentally-determined bioconcentration factor (BCF) of less than 100. This material is not expected to significantly bioaccumulate. When released into the air, this material is expected to be readily degraded by reaction with photochemically produced hydroxyl radicals. When released into the air, this material is expected to be readily degraded by photolysis. When released into the air, this material is expected to have a half-life of less than 1 day. When released into the air, this material is not expected to adversely affect the ozone layer.
Environmental Toxicity:This material is expected to be very toxic to terrestrial life. This material is
expected to be very toxic to aquatic life. The LC50/96-hour values for fish are between 10 and 100 mg/l. The EC50/48-hour values for daphnia are less than 1 mg/l.
Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and
sent to a RCRA approved incinerator or disposed in a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Classification: UN1547, Aniline, 6.1, PG II
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Aniline (62-53-3)
TSCA Yes
EC Yes
Japan YES
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Aniline (62-53-3)
Korea Yes
DSL Yes
NDSL No
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Aniline (62-53-3)
RQ 5000
TPQ 1000*
List Yes
Chemical Catg: No
Federal, State &
International Regulations –
Part 2:Ingredient
Aniline (62-53-3)
CERCLA 5000
261.33 U012
8(d) No
Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:Yes (Pure/Liquid)
SARA 311/312: Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactivity: No
Australian Hazchem Code: 3x
Poison Schedule: S6
Conditions aggravated/Target organs: Persons with preexisting skin, eye, and respiratory disorders may be more susceptible. DANGER! May be fatal if swallowed, inhaled or absorbed through skin. Causes irritation to skin, eyes and respiratory tract. Combustible liquid and vapor. Target organs: Affects blood, cardiobascular system, central nervous system, liver and kidnyes.
Toxic by inhalation. Affects ability of blood to carry oxygen. Toxic by ingestion even as little as 1 gram. Toxic! Suspect Carcinogen! Acute: Irritation to skin, eyes, lungs, mucous membranes, and GI tract. Nausea, dizziness, headache. Chronic: Dermatitis, cyanosis,
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/28/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Aniline Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Aniline Solution at a competitive price from us. We have ready stock of Aniline Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.