Drilling Fluids & Mud Oil Field chemicals
Asphaltene Inhibitor 2021
ASPHALTENE INHIBITOR helps to control Asphaltene deposits that eventually stop oil flow.
- Part number
- RXSOL-81-8207-210
- Brand
- RXSOL
Overview
ASPHALTENE INHIBITOR 2021 helps to control Asphaltene deposits that eventually stop oil flow. ASPHALTENE INHIBITOR can be placed by a squeeze treatment, continuous injection, or with other stimulation fluids. The product has been developed to mitigate Asphaltene flocculation and deposition in oil production operations e.g. in the reservoir, production wells and processing units, due to pressure drop or incompatible fluids and other applications including anti-foulants, Demulsifier synergists, and fuel oil stabilisation. ASPHALTENE INHIBITOR benefits from a broad spectrum performance across a wide range of crude oil types, its low viscosity, low pour point and high temperature stability (>300°C). ASPHALTENE INHIBITOR boasts global compliance with regulations including OSPAR and CEFAS. Such regulatory compliances ensure FlowSolve 110LN has a low environmental impact for marine operations. Typical treat rates range from 10 to 500 ppm dependant on the crude oil type and the severity of Asphaltene deposition tendency.
Technical specifications
|
SPECIFIC GRAVITY@ 20 C |
0.851 g/cm3 |
|
SOLUBILITY IN WATER |
Non Soluble |
|
VAPOR DENSITY (Air=1) |
No data |
|
ODOR |
Mild |
|
%VOLATILES BY VOLUME @21°C (70°F) |
94.3% |
|
EVAPORATION RATE (n-BuAc=1) |
<0.1 (nBuAc=1) |
|
MELTING POINT / FREEZING POINT |
-45°C (-49°F) |
|
BOILING POINT |
153°C (302°F) |
|
pH |
N/A |
|
APPEARANCE and COLOR |
Light yellow liquid |
|
VAPOUR PRESSURE, mm Hg |
0.2 hPa |
|
Flash Point |
64°C (147°F) |
Applications
- Used in pipelines to reduce viscosity and therefore increase flow while reducing pumping pressure.
- Used downhole or in flowlines/pipelines to clean and prevent asphaltene and paraffin blockages while enhancing flow.
- Used downhole for squeeze jobs, down capillary strings, or down back side for wellbore cleaning.
Characteristics and notes
Product Benefits:
- Viscosity Reducer
- Flow Enhancer
- Paraffin & Asphaltene Control
- Pipeline pressure reducer
- Demulsifier
Shipment: Non-Hazardous for transport
Storage: Keep out of direct sunlight. Keep from freezing. Store between 40-120°F.
Disposal: Dispose of in accordance with local, state, and federal regulations.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | Asphaltene Inhibitor 2021 |
| Part Number | RXSOL-81-8207-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 27672100 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com | |
| Website | www.rxmarine.com |
| Name of Substance | Cas Number | EC Number | Weight % |
| Asphaltene Inhibitor 2021 | 1330-20-7 | 215-535-7 | 100% |
| Signal Word | DANGER! |
| Hazard Statements |
Flammable liquid and vapour.
May be fatal if swallowed and enters airways.
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
May cause damage to organs (Auditory system) through prolonged or repeated exposure.
|
| Precautionary statements - prevention |
Keep away from heat/ sparks/ open flames/ hot surfaces. No smoking.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ ventilating/ lighting equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Do not breathe mist or vapours.
Wash skin thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/ eye protection/ face protection.
|
| Precautionary statements - response |
IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/
shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON
CENTER/ doctor if you feel unwell.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Get medical advice/ attention if you feel unwell.
Do NOT induce vomiting.
If skin irritation occurs: Get medical advice/ attention.
If eye irritation persists: Get medical advice/ attention.
Take off contaminated clothing and wash before reuse.
In case of fire: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide to
extinguish
|
| Storage | Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up. |
| Disposal | Dispose of contents and/or container to an approved waste disposal plant. |
| Other hazards | No data available |
| General advice |
First Aid responders should pay attention to self-protection and use the recommended protective
clothing (chemical resistant gloves, splash protection). If potential for exposure exists refer to Section
8 for specific personal protective equipment.
|
| Skin Contact | Wash off with plenty of water. Suitable emergency safety shower facility should be available in work area. |
| Eye Contact |
Flush eyes thoroughly with water for several minutes. Remove contact lenses after the
initial 1-2 minutes and continue flushing for several additional minutes. If effects occur, consult a
physician, preferably an ophthalmologist. Suitable emergency eye wash facility should be available in
work area.
|
| Inhalation: |
Move person to fresh air and keep comfortable for breathing. If not breathing, give
artificial respiration; if by mouth to mouth use rescuer protection (pocket mask, etc). If breathing is
difficult, oxygen should be administered by qualified personnel. Call a physician or transport to a
medical facility
|
| Ingestion | Do not induce vomiting. Call a physician and/or transport to emergency facility immediately |
| Most important symptoms/effects |
May be fatal if swallowed and enters airways. Causes skin irritation. Causes serious eye irritation.
May cause respiratory irritation. May cause damage to organs through prolonged or repeated
exposure.
|
| Notes to Physician |
Maintain adequate ventilation and oxygenation of the patient. If burn is present,
treat as any thermal burn, after decontamination. If lavage is performed, suggest endotracheal and/or
esophageal control. Danger from lung aspiration must be weighed against toxicity when considering
emptying the stomach. The decision of whether to induce vomiting or not should be made by a
physician. Alcohol consumed before or after exposure may increase adverse effects. No specific
antidote. Treatment of exposure should be directed at the control of symptoms and the clinical
condition of the patient. Skin contact may aggravate preexisting dermatitis.
|
| Suitable extinguishing media |
Water fog or fine spray.. Dry chemical fire extinguishers..
Carbon dioxide fire extinguishers.. Foam.. Alcohol resistant foams (ATC type) are preferred.
General purpose synthetic foams (including AFFF) or protein foams may function, but will be
less effective.. Water fog, applied gently may be used as a blanket for fire extinguishment.
|
| Unsuitable extinguishing media |
Do not use direct water stream.. Straight or direct water
streams may not be effective to extinguish fire..Do not use direct water stream.. Straight or direct water
streams may not be effective to extinguish fire..
|
| Special hazards arising from the substance or mixture Hazardous combustion products | During a fire, smoke may contain the original material in addition to combustion products of varying composition which may be toxic and/or irritating.. Combustion products may include and are not limited to:. Phenolic compounds.. Carbon monoxide.. Carbon dioxide.. |
| Unusual Fire and Explosion Hazards |
Container may rupture from gas generation in a fire
situation.. Violent steam generation or eruption may occur upon application of direct water
stream to hot liquids.. Electrically ground and bond all equipment.. Flammable mixtures of
this product are readily ignited even by static discharge.. Flammable mixtures may exist
within the vapor space of containers at room temperature..
|
| Fire Fighting Procedures |
Keep people away. Isolate fire and deny unnecessary entry..
Stay upwind. Keep out of low areas where gases (fumes) can accumulate.. Water may not be
effective in extinguishing fire.. Use water spray to cool fire exposed containers and fire
affected zone until fire is out and danger of reignition has passed.. Fight fire from protected
location or safe distance. Consider the use of unmanned hose holders or monitor nozzles..
Immediately withdraw all personnel from the area in case of rising sound from venting safety
device or discoloration of the container.. Do not use direct water stream. May spread fire..
Eliminate ignition sources.. Move container from fire area if this is possible without hazard..
Burning liquids may be moved by flushing with water to protect personnel and minimize
property damage.. Water fog, applied gently may be used as a blanket for fire
extinguishment..
|
| Special protective equipment for firefighters |
Wear positive-pressure self-contained
breathing apparatus (SCBA) and protective fire fighting clothing (includes fire fighting helmet,
coat, trousers, boots, and gloves).. If protective equipment is not available or not used, fight
fire from a protected location or safe distance..
|
| Personal precautions, protective equipment and emergency procedures: |
Isolate area. Keep
unnecessary and unprotected personnel from entering the area. Refer to section 7, Handling, for
additional precautionary measures. Keep personnel out of low areas. Keep upwind of spill. Ventilate
area of leak or spill. No smoking in area. Eliminate all sources of ignition in vicinity of spill or released
vapor to avoid fire or explosion. Use appropriate safety equipment. For additional information, refer to
Section 8, Exposure Controls and Personal Protection.
|
| Enviromental Precaution |
Prevent from entering into soil, ditches, sewers, waterways and/or
groundwater. See Section 12, Ecological Information.
|
| Methods and materials for containment and cleaning |
Contain spilled material if possible.
Collect in suitable and properly labeled containers. See Section 13, Disposal Considerations, for
additional information.
|
| Precautions for safe handling |
Keep away from heat, sparks and flame. Use only with adequate
ventilation. Keep container closed. No smoking, open flames or sources of ignition in handling and
storage area. Vapors are heavier than air and may travel a long distance and accumulate in low lying
areas. Ignition and/or flash back may occur. Avoid contact with eyes, skin, and clothing. Wash
thoroughly after handling. Do not swallow. Avoid breathing vapor. Use with adequate ventilation.
Keep container closed. See SECTION 8, Exposure Controls/Personal Protection, prior to handling.
|
| Conditions for safe storage |
Minimize sources of ignition, such as static build-up, heat, spark or
flame. Keep container closed. Flammable mixtures may exist within the vapor space of containers at
room temperature
|
| Engineering Control |
Use engineering controls to maintain airborne level below exposure limit
requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, use
only with adequate ventilation. Local exhaust ventilation may be necessary for some operations.
|
| Individual protection measures |
Eye/face Protection : Use chemical goggles. If exposure causes eye discomfort, use a fullface respirator. Skin and body protection :Use gloves chemically resistant to this material. Examples ofpreferred glove barrier materials include: Polyethylene. Ethyl vinyl alcohol laminate("EVAL"). Viton. Examples of acceptable glove barrier materials include:Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl alcohol ("PVA"). Polyvinylchloride ("PVC" or "vinyl"). NOTICE: The selection of a specific glove for a particularapplication and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection),potential body reactions to glove materials, as well as the instructions/specificationsprovided by the glove supplier. Respiratory Protection : Respiratory protection should be worn when there is a potential toexceed the exposure limit requirements or guidelines. If there are no applicable exposure limitrequirements or guidelines, use an approved respirator. Selection of air-purifying or positivepressure supplied-air will depend on the specific operation and the potential airborneconcentration of the material. For emergency conditions, use an approved positive-pressureself-contained breathing apparatus. In confined or poorly ventilated areas, use an approvedself-contained breathing apparatus or positive pressure air line with auxiliary self-contained airsupply.The following should be effective types of air-purifying respirators: Organic vapor cartridge with a particulate pre-filter. |
Control parameters If exposure limits exist, they are listed below. If no exposure limits are displayed, then no values are applicable.
| Component | Regulation | Type of listing | Value |
| Xylene | OSHA Z-1 ACGIH | TWA | 435 mg/m3 100 ppm |
| TWA | 20 ppm | ||
| Further information: A4: Not classifiable as a human carcinogen; Ototoxicant | |||
| Ethylbenzene | ACGIH | ACGIH | 20 ppm |
| Further information: A3: Confirmed animal carcinogen with unknown relevance to humans; Ototoxicant | |||
| OSHA Z-1 | TWA | 435 mg/m3 100 ppm | |
| Potassium hydroxide | ACGI | C | 2 mg/m3 |
Biological occupational exposure limits
| Component | CAS- No. | Control parameters | Biological specimen | Sampling time | Permissible concentration | Basis |
| Xylene | 1330-20-7 | Methylhippu ric acids | Urine | End of shift (As soon as possible after exposure ceases | 1.5 g/g creatinine | ACGIH BEI |
| Ethylbenzene | 100-41-1 | Sum of mandelic acid and phenyl glyoxylic acid | Urine | End of shift (As soon as possible after exposure ceases) | 0.15 g/g creatinine | ACGIH BEI |
| Form | Liquid |
| Colour | Amber to Red-brown |
| Odour | Characteristic |
| Odor Threshold | not determined |
| pH | No data available |
| Melting Point | No data available |
| Freezing point | No data available |
| Boiling Point | 140 °C ( 284 °F) Supplier |
| Flash Point | closed cup 25 °C ( 77 °F) Literature |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | Not Applicable |
| Flammability (liquids) | Not expected to be a static-accumulating flammable liquid |
| Explosive limits |
Upper Not available Lower Not available |
| Vapour pressure | No data available |
| Vapour Density | No data available |
| Relative Density (water = 1) | 0.9 - 1.0 at 25 °C (77 °F) Literature |
| Decomposition Temperature | No data available |
| Partition coefficient | No data available |
| Autoignition Temperature | No data available |
| Solubility in Water | insoluble |
| Viscosity | No data available |
| Kinematic Viscosity | No data available |
| Explosive properties | No data available |
| Oxidizing properties | No data available |
| Molecular Weight | No data available |
| Recativity Hazard | No data available |
| Stability | Stable under recommended storage conditions. See Storage, Section 7. |
| Possibility of hazardous reactions | Will not occur by itself. Masses of more than one pound (0.5 kg) of product plus an aliphatic amine will cause irreversible polymerization with considerable heat buildup. |
| Conditions to avoid |
Avoid temperatures above 300°C (572°F) Potentially violent decomposition
can occur above 350°C (662°F) Generation of gas during decomposition can cause pressure in
closed systems. Pressure build-up can be rapid. Avoid static discharge.
|
| Incompatible materials | Avoid contact with oxidizing materials. Avoid contact with: Acids. Bases. Avoid unintended contact with amines. |
| Hazardous Decomposition Products |
Decomposition products depend upon temperature, air supply
and the presence of other materials.. Gases are released during decomposition.. Uncontrolled
exothermic reaction of epoxy resins release phenolics, carbon monoxide, and water..
|
| Acute oral toxicity |
Information for the Product:
Very low toxicity if swallowed. Swallowing may result in gastrointestinal irritation. May
cause choking or blockage of the digestive tract if swallowed.
As product: Single dose oral LD50 has not been determined.
Based on information for component(s):
LD50, > 5,000 mg/kg Estimated.
Information for components:
Alkyl phenol formaldehyde resin
Single dose oral LD50 has not been determined.
Xylene
LD50, Rat, 4,300 mg/kg
Ethylbenzene
LD50, Rat, 3,500 mg/kg
Potassium hydroxide
LD50, Rat, male, 333 mg/kg
|
| Acute dermal toxic |
Prolonged skin contact is unlikely to result in absorption of harmful amounts.
As product: The dermal LD50 has not been determined.
Based on information for component(s):
LD50, > 2,000 mg/kg Estimated.
Information for components:
Alkyl phenol formaldehyde resin
The dermal LD50 has not been determined.
Xylene
LD50, Rabbit, > 2,000 mg/kg
Ethylbenzene
LD50, Rabbit, 15,500 mg/kg
Potassium hydroxide
The dermal LD50 has not been determined.
|
| Acute inhalation toxicity | Vapor concentrations are attainable which could be hazardous on single exposure. Symptoms may include headache, dizziness and drowsiness, progressing to incoordination and unconsciousness. May cause respiratory irritation and central nervous system depression. In humans, symptoms may include: Lethargy Alcohol consumed before or after exposure may increase adverse effects. As product: The LC50 has not been determined. Information for components: Alkyl phenol formaldehyde resin The LC50 has not been determined. Xylene LC50, Rat, 4 Hour, vapour, 27.5 mg/l Ethylbenzene LC50, Rat, 4 Hour, vapour, 17.2 mg/l Potassium hydroxide The LC50 has not been determined. |
| Skin corrosion/irritation |
Based on information for component(s):
Brief contact may cause moderate skin irritation with local redness.
Prolonged contact may cause skin burns. Symptoms may include pain, severe local redness,
swelling, and tissue damage.
May cause drying and flaking of the skin.
Vapor may cause skin irritation.
Information for components:
Xylene
Prolonged contact may cause skin irritation with local redness.
Repeated contact may cause skin burns. Symptoms may include pain, severe local redness,
swelling, and tissue damage.
Vapor may cause skin irritation.
May cause drying and flaking of the skin.
Ethylbenzene
Brief contact may cause moderate skin irritation with local redness.
Prolonged contact may cause skin burns. Symptoms may include pain, severe local
redness, swelling, and tissue damage.
May cause drying and flaking of the skin.
Potassium hydroxide
Brief contact may cause severe skin burns. Symptoms may include pain, severe local
redness and tissue damage.
Effects may be delayed.
|
| Serious eye damage/eye irritation |
Based on information for component(s):
May cause moderate eye irritation.
Vapor may cause lacrimation (tears).
Vapor may cause eye irritation experienced as mild discomfort and redness.
Information for components:
Xylene
May cause moderate eye irritation.
May cause slight temporary corneal injury.
Vapor may cause eye irritation experienced as mild discomfort and redness.
Ethylbenzene
May cause moderate eye irritation.
Vapor may cause lacrimation (tears).
Potassium hydroxide
May cause severe irritation with corneal injury which may result in permanent impairment of
vision, even blindness. Chemical burns may occur.
Dust or mist may cause eye irritation and corneal injury.
Effects may be delayed.
|
| For skin sensitization: | Not classified based on available information. |
| Information for components: |
Xylene
For skin sensitization:
No relevant data found.
For respiratory sensitization:
No relevant data found.
Ethylbenzene
Did not cause allergic skin reactions when tested in humans.
For respiratory sensitization:
No relevant data found.
Potassium hydroxide
Did not cause allergic skin reactions when tested in guinea pigs.
For respiratory sensitization:
No relevant data found.
|
| Specific Target Organ Systemic Toxicity (Single Exposure) |
Information for components:
Xylene
May cause respiratory irritation.
Route of Exposure: Inhalation
Target Organs: Respiratory system
EthylbenzeneEvaluation of available data suggests that this material is not an STOT-SE toxicant. Potassium hydroxide Material is corrosive. Material is not classified as a respiratory irritant; however, upper respiratory tract irritation or corrosivity may be expected.
|
| Aspiration Hazard |
Aspiration into the lungs may occur during ingestion or vomiting, causing lung damage or even
death due to chemical pneumonia.
Information for components:
Xylene
May be fatal if swallowed and enters airways.
Ethylbenzene
Aspiration into the lungs may occur during ingestion or vomiting, causing lung damage or
even death due to chemical pneumonia. May be fatal if swallowed and enters airways.
Potassium hydroxide
Aspiration into the respiratory system may occur during ingestion or vomiting. Due to
corrosivity, tissue damage or lung injury may occur.
|
| Specific Target Organ Systemic Toxicity (Repeated Exposure) |
Information for components:
Xylene
In animals, effects have been reported on the following organs:
Blood.
Kidney.
Liver.
Xylene is reported to have caused hearing loss in laboratory animals upon exposure to high
concentrations; such effects have not been reported in humans.
Ethylbenzene
In animals, effects have been reported on the following organs:
May cause hearing loss based on animal data.
Kidney.
LiverLung.
Although one early inhalation study on ethylbenzene reported an adverse effect on the
testes, recent, more comprehensive studies have not shown this effect.
Potassium hydroxide
Excessive exposure may cause severe irritation to upper respiratory tract (nose and throat)
and lungs
|
| Carcinogenicity |
Information for the Product:
Product test data not available.
Information for components:
Xylene
Xylene was not found to be carcinogenic in a National Toxicology Program bioassay in rats
and mice.
Ethylbenzene
Ethylbenzene has been shown to cause cancer in laboratory animals. There is no evidence
that these findings are relevant to humans.
Potassium hydroxide
No relevant data found Component List Classification
Ethylbenzene IARC Group 2B: Possibly carcinogenic to
humans
ACGIH A3: Confirmed animal carcinogen with
unknown relevance to humans.
|
| Teratogenicity |
Information for components:
Xylene
Exaggerated doses of xylene given orally to pregnant mice resulted in an increase in cleft
palate, a common developmental abnormality in mice. In animal inhalation studies, xylene
caused toxicity to the fetus but did not cause birth defects. Available data are inadequate for
evaluation of maternal toxicity.
EthylbenzeneHas caused birth defects in laboratory animals only at doses toxic to the mother. Has been
toxic to the fetus in lab animals at doses nontoxic to the mother.
Potassium hydroxide
No relevant data found.
|
| Reproductive toxicit |
Information for the Product:
Product test data not available.
Information for components:
Xylene
In animal studies, did not interfere with reproduction.
Ethylbenzene
In animal studies, did not interfere with reproduction. In animal studies, did not interfere with
fertility.
Potassium hydroxide
No relevant data found.
|
| Mutagenicity |
Information for the Product:
Product test data not available.
Information for components:
Xylene
In vitro genetic toxicity studies were negative. Animal genetic toxicity studies were negative.
Ethylbenzene
In vitro genetic toxicity studies were negative. Animal genetic toxicity studies were negative.
Potassium hydroxide
In vitro mutagenicity studies were negative.
|
| Toxicity to Fish |
Xylene
Acute toxicity to fish
Material is moderately toxic to aquatic organisms on an acute basis (LC50/EC50 between 1
and 10 mg/L in the most sensitive species tested).
LC50, Oncorhynchus mykiss (rainbow trout), semi-static test, 96 Hour, 2.6 mg/l, OECD Test
Guideline 203 or Equivalent
Acute toxicity to aquatic invertebrates
IC50, Daphnia magna (Water flea), 24 Hour, 1 - 4.7 mg/l, OECD Test Guideline 202 or
Equivalent
Acute toxicity to algae/aquatic plants
ErC50, Pseudokirchneriella subcapitata (algae), Static, 73 Hour, Growth rate, 4.36 mg/l,
OECD Test Guideline 201 or Equivalent
NOEC, Pseudokirchneriella subcapitata (green algae), 73 Hour, Growth rate, 0.44 mg/l, OECD
Test Guideline 201 or Equivalent
Chronic toxicity to fish
NOEC, Oncorhynchus mykiss (rainbow trout), flow-through, 56 d, mortality, > 1.3 mg/lEthylbenzene
Acute toxicity to fish
Material is moderately toxic to aquatic organisms on an acute basis (LC50/EC50 between 1
and 10 mg/L in the most sensitive species tested).
LC50, Oncorhynchus mykiss (rainbow trout), semi-static test, 96 Hour, 4.2 mg/l, OECD Test
Guideline 203 or Equivalent
Acute toxicity to aquatic invertebrates
EC50, Daphnia magna (Water flea), Static, 48 Hour, 1.8 - 2.4 mg/l
Acute toxicity to algae/aquatic plants
EC50, Pseudokirchneriella subcapitata (green algae), 72 Hour, Growth inhibition (cell density
reduction), 3.6 - 4.6 mg/l, OECD Test Guideline 201 or Equivalent
Toxicity to bacteria
EC50, Bacteria, 16 Hour, > 12 mg/l
Chronic toxicity to aquatic invertebrates
NOEC, Ceriodaphnia dubia (water flea), semi-static test, 7 d, 0.96 mg/l
Toxicity to soil-dwelling organisms
LC50, Eisenia fetida (earthworms), 2 d, survival, 0.047 mg/cm2
|
| Products of Biodegradation: |
Xylene
Biodegradability: Material is expected to be readily biodegradable.
10-day Window: Pass
Biodegradation: > 60 %
Exposure time: 10 d
Method: OECD Test Guideline 301F or EquEthylbenzene
Biodegradability: Material is readily biodegradable. Passes OECD test(s) for ready
biodegradability.
10-day Window: Pass
Biodegradation: 100 %
Exposure time: 6 d
Method: OECD Test Guideline 301E or Equivalent
Theoretical Oxygen Demand: 3.17 mg/mg Estimated.
Chemical Oxygen Demand: 2.62 mg/mg Dichromateivalent
Theoretical Oxygen Demand: 3.17 mg/mg
|
| Alkyl phenol formaldehyde resin Bioaccumulation |
Xylene
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3).
Partition coefficient: n-octanol/water(log Pow): 3.12 Measured
Bioconcentration factor (BCF): 25.9 Rainbow trout (Salmo gairdneri) Measured Ethylbenzene
Bioaccumulation: Bioconcentration potential is low (BCF < 100 or Log Pow < 3).
Partition coefficient: n-octanol/water(log Pow): 3.15 Measured
Bioconcentration factor (BCF): 15 Fish Measured
Potassium hydroxide
Bioaccumulation: Partitioning from water to n-octanol is not applicable
|
| Mobility in soil |
Alkyl phenol formaldehyde resin
No relevant data found.
Xylene
Partition coefficient (Koc): 443 Estimated.
Ethylbenzene
Partition coefficient (Koc): 518 Estimated.
Potassium hydroxide
No relevant data found.
|
Biological oxygen demand (BOD
| Incubation Time | BOD |
| 5 d | 37.000 % |
| 10 d | 58.000 % |
| 20 d | 72.000 % |
Biological oxygen demand (BOD)
| Incubation Time | BOD |
| 5 d | 31.5 % |
| 10 d | 38.5 % |
| 20 d | 45.4 % |
| Disposal methods |
DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY
OF WATER. All disposal practices must be in compliance with all Federal, State/Provincial and local
laws and regulations. Regulations may vary in different locations. Waste characterizations and
compliance with applicable laws are the responsibility solely of the waste generator. AS YOUR
SUPPLIER, WE HAVE NO CONTROL OVER THE MANAGEMENT PRACTICES OR
MANUFACTURING PROCESSES OF PARTIES HANDLING OR USING THIS MATERIAL. THE
INFORMATION PRESENTED HERE PERTAINS ONLY TO THE PRODUCT AS SHIPPED IN ITS
INTENDED CONDITION AS DESCRIBED IN MSDS SECTION: Composition Information. FOR
UNUSED & UNCONTAMINATED PRODUCT, the preferred options include sending to a licensed,
permitted: Incinerator or other thermal destruction device. Waste water treatment system.
|
DOT
| Proper shipping name | Flammable liquids, n.o.s.(Xylene, Ethylbenzene) |
| UN Number | UN 1993 |
| Hazard Class | 3 |
| Packing group | III |
| Reportable Quantity | Xylene, Ethylbenzene |
Classification for SEA transport (IMO-IMDG)
| Proper shipping name | FLAMMABLE LIQUID, N.O.S.(Xylene, Ethylbenzene) |
| UN Number | UN 1993 |
| Marine pollutant | No |
| Hazard Class | 3 |
| Packing group | III |
| Transport in bulk according to Annex I or II of MARPOL 73/78 and the IBC or IGC Code | Consult IMO regulations before transporting ocean bulk |
IATA
| UN Number | UN1993 |
| Proper shipping name | Flammable liquid, n.o.s.(Xylene, Ethylbenzene) |
| Hazard Class | 3 |
| Packing group | III |
| Superfund Amendments and Reauthorization Act of 1986 Title III (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312 | Flammable (gases, aerosols, liquids, or solids) Specific target organ toxicity (single or repeated exposure) Aspiration hazard Skin corrosion or irritation Serious eye damage or eye irritation |
| Superfund Amendments and Reauthorization Act of 1986 Title III (Emergency Planning and Community Right-to-Know Act of 1986) Section 313 | This product contains the following substances which are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and which are listed in 40 CFR 372. Components CASRN Xylene 1330-20-7Ethylbenzene 100-41-4 |
| Pennsylvania Worker and Community Right-To-Know Act: | To the best of our knowledge, this product does not contain chemicals at levels which require reporting under this statute |
| California Prop. 65 | WARNING: This product can expose you to chemicals including Ethylbenzene, which is/are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. |
| United States TSCA Inventory (TSCA) | All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic Substances Control Act (TSCA) Chemical Substance Inventory. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |
| Liquid | |
| Colour | Colourless |
| Liquid | |
| Colour | Colourless |
| No information available |
Availability
Asphaltene Inhibitor 2021 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Asphaltene Inhibitor 2021 at a competitive price from us. We have ready stock of Asphaltene Inhibitor 2021 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
