BALSAM CANADA (SYNTHETIC)
- Part number
- RXSOL-60-6604-003
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Canada balsam is a plant. People use it for medicine. People use Canada balsam for burns, sores, cold symptoms, pain, and other conditions, but there is no good scientific evidence to support these uses. Canada balsam is also used as a food additive, in manufacturing, and in dentistry.
Technical specifications
| Physical state at 20 °C | ||| |
|---|---|
| Solid. | |
| Odour | ||| |
Odorless
| Odour threshold | ||| |
|---|---|
| No data available. | |
| pH value | ||| |
| Not applicable. | |
| Melting point [°C] | ||| |
| 48 | 55 °C |
| Decomposition point [°C] | ||| |
| Odour threshold | ||| |
| No data available. | |
| pH value | ||| |
| Not applicable. | |
| Melting point [°C] | ||| |
| 48 | 55 °C |
| Decomposition point [°C] | ||| |
| Odour threshold | ||| |
| No data available. | |
| pH value | ||| |
| Not applicable. | |
| Melting point [°C] | ||| |
| 48 | 55 °C |
| Decomposition point [°C] | ||| |
N/A
| Critical temperature [°C] | ||| |
|---|---|
| Auto-ignition temperature [°C] | ||| |
| Flammability (solid, gas) | ||| |
| Flash point [°C] | ||| |
| Final boiling point [°C] | ||| |
| Evaporation rate | ||| |
| Vapour pressure [20°C] | ||| |
| Vapour pressure mm/Hg | ||| |
| Vapour density | ||| |
| Density [g/cm3] | ||| |
| Relative density, gas (air=1) | ||| |
| Relative density, liquid (water=1) | ||| |
| Solubility in water [% weight] | ||| |
| Log Pow octanol / water at 20°C | ||| |
| No data available. | |
| Solubility | ||| |
| Viscosity at 40°C [mm2/s] | ||| |
| Explosive properties | ||| |
| Explosion limits | upper [%] : ||| |
| Explosion limits | lower [%] : ||| |
| Oxidising properties | ||| |
| No data available. | |
| Physical state at 20 °C | ||| |
| Solid. | |
| Odour | ||| |
| Critical temperature [°C] | ||| |
| Auto-ignition temperature [°C] | ||| |
| Flammability (solid, gas) | ||| |
| Flash point [°C] | ||| |
| Final boiling point [°C] | ||| |
| Evaporation rate | ||| |
| Vapour pressure [20°C] | ||| |
| Vapour pressure mm/Hg | ||| |
| Vapour density | ||| |
| Density [g/cm3] | ||| |
| Relative density, gas (air=1) | ||| |
| Relative density, liquid (water=1) | ||| |
| Solubility in water [% weight] | ||| |
| Log Pow octanol / water at 20°C | ||| |
| No data available. | |
| Solubility | ||| |
| Viscosity at 40°C [mm2/s] | ||| |
| Explosive properties | ||| |
| Explosion limits | upper [%] : ||| |
| Explosion limits | lower [%] : ||| |
| Oxidising properties | ||| |
| No data available. | |
| Physical state at 20 °C | ||| |
| Solid. | |
| Odour | ||| |
| Critical temperature [°C] | ||| |
| Auto-ignition temperature [°C] | ||| |
| Flammability (solid, gas) | ||| |
| Flash point [°C] | ||| |
| Final boiling point [°C] | ||| |
| Evaporation rate | ||| |
| Vapour pressure [20°C] | ||| |
| Vapour pressure mm/Hg | ||| |
| Vapour density | ||| |
| Density [g/cm3] | ||| |
| Relative density, gas (air=1) | ||| |
| Relative density, liquid (water=1) | ||| |
| Solubility in water [% weight] | ||| |
| Log Pow octanol / water at 20°C | ||| |
| No data available. | |
| Solubility | ||| |
| Viscosity at 40°C [mm2/s] | ||| |
| Explosive properties | ||| |
| Explosion limits | upper [%] : ||| |
| Explosion limits | lower [%] : ||| |
| Oxidising properties | ||| |
| No data available. | |
150°C
| Boiling point [°C] | ||| |
|---|---|
| Boiling point [°C] | ||| |
| Boiling point [°C] | ||| |
2600C
| Initial boiling point [°C] | ||| |
|---|---|
| Initial boiling point [°C] | ||| |
| Initial boiling point [°C] | ||| |
Patially soluble in
| Solubility in water | ||| |
|---|---|
| Solubility in water | ||| |
| Solubility in water | ||| |
Applications
Canada balsam was also commonly used for making permanent microscope slides. From about 1830 molten Canada balsam was used for microscope slides, then Canada balsam in solution was introduced in 1843, becoming popular in the 1850s.
Dosage and directions
Balm of Gilead, a healing compound made from the resinous gum of Commiphora gileadensis.
Characteristics and notes
Canada balsam, also called Canada turpentine or balsam of fir, is the oleoresin of the balsam fir tree (Abies balsamea) of boreal North America.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6604-004 |
| Product Type | BARBITURIC ACID AR |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : BARBITURIC ACID AR
CAS No :67-52-7
Substance.
Contains no other components or impurities which will influence the classification of the
product.
2.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Not classified.
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not classified.
2.2. Label elements
Labelling EC 67/548 or EC 1999/45
Not classified.
Labelling Regulation EC 1272/2008 (CLP)
Not classified.
2.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest.
Skin contact : Remove affected clothing and wash all exposed skin area with mild soap
and water,followed by warm water rinse
Eye contact : Rinseimmediately with plenty of water. Obtain medical attention if pain,
blinking or redness persist.
Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Not expected to present a significant hazard under
anticipated conditions of normal use.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be
present.
5.3. Advice for fire-fighter
s Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : On land, sweep or shovel into suitable containers. Minimize
generation of dust.Store away from other materials
.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling ; Wash hands and other exposed areas with mild soap and water before eat,
drink or smoke and when leaving work.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container closed when not in use
.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits :No data available
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Odour : Odorless
Odour threshold : No data available.
pH value : Not applicable.
Melting point [°C] :248 - 255 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : 150°C
Boiling point [°C] : 2600C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : N/A
Vapour density : N/A
Density [g/cm3] : N/A
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : Patially soluble in
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not met.
Aspiration hazard : Based on available data, the classification criteria are not met.
12.1. Toxicity
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject to authorization
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation
(CE) Nº 1907/2006 and with CLP Regulation (CE) Nº 1272/2008
(The statements contained herein are offered for informational purposes only and are
based upon technical data that MOLYCHEM believes to be accurate. It is intended for
use only by persons having the necessary technical skills and at their own discretion and
risk. Since conditions and manner of use are outside our control, we make NO
WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS OR
OTHERWISE.)
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
BALSAM CANADA (SYNTHETIC manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
BALSAM CANADA (SYNTHETIC is available in small packing as well as in bulk. Buy premium quality BALSAM CANADA (SYNTHETIC and other lab chemicals from one of the most trusted brands.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[PRODUCT NAME] is available in small packing as well as in bulk. Buy premium quality [PRODUCT NAME] and other lab chemicals from one of the most trusted brands.
