RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Lab Chemical

BISMUTH CARBONATE

Part number
RXSOL-60-6604-071
Category
Lab Chemical
Brand
RXSOL
RXSOL

Overview

Bismuth is a chemical element with the symbol Bi and atomic number 83. The free element is 86% as dense as lead. It is a brittle metal with a silvery-white color when freshly produced, but surface oxidation can give it an iridescent tinge in numerous colours.

Bismuth Carbonate is a water insoluble Bismuth source that can easily be converted to other Bismuth compounds, such as the oxide by heating (calcination). Carbonate compounds also give off carbon dioxide when treated with dilute acids.
Uses. It is highly radiopaque and for example is used as a filler in radiopaque catheters which can be seen by x-ray. In modern medicine, bismuth subcarbonate has been made into nanotube arrays that exhibit antibacterial properties. It is also used in fireworks to make Dragon's eggs.

Applications

  • Opacifier in X-ray diagnosis, enamel fluxes, ceramic glazesBismuth carbonate oxide is used in ceramic glazes and pearly coatings on plastics. It is also used as an antacid and anti-diarrheal in medicinal chemistry. Further, it is used as a filler in radiopaque catheters. It is also employed in fireworks and to make Dragon's eggs. In addition to this, it is made into nanotube arrays that exhibit antibacterial properties.
  • Opacifier in X-ray diagnosis, enamel fluxes, ceramic glazesBismuth carbonate oxide is used in ceramic glazes and pearly coatings on plastics. It is also used as an antacid and anti-diarrheal in medicinal chemistry. Further, it is used as a filler in radiopaque catheters. It is also employed in fireworks and to make Dragon's eggs. In addition to this, it is made into nanotube arrays that exhibit antibacterial properties.
    Opacifier in X-ray diagnosis, enamel fluxes, ceramic glazesBismuth carbonate oxide is used in ceramic glazes and pearly coatings on plastics. It is also used as an antacid and anti-diarrheal in medicinal chemistry. Further, it is used as a filler in radiopaque catheters. It is also employed in fireworks and to make Dragon's eggs. In addition to this, it is made into nanotube arrays that exhibit antibacterial properties.

    Dosage and directions

    The usual recommended dose for adults is 525 mg (2 tablets) every 30 minutes as needed, up to a maximum of 16 tablets in 24 hours.

    The usual recommended dose for adults is 525 mg (2 tablets) every 30 minutes as needed, up to a maximum of 16 tablets in 24 hours.
    The usual recommended dose for adults is 525 mg (2 tablets) every 30 minutes as needed, up to a maximum of 16 tablets in 24 hours.
    The usual recommended dose for adults is 525 mg (2 tablets) every 30 minutes as needed, up to a maximum of 16 tablets in 24 hours.
    The usual recommended dose for adults is 525 mg (2 tablets) every 30 minutes as needed, up to a maximum of 16 tablets in 24 hours.

    Characteristics and notes

  • Typical bulk density more than 0.50g/cm^3Light sensitive. Incompatible with oxidizing agents.
  • Safety and SDS

    Read the safety data sheet before handling. Wear suitable gloves and eye protection.

    View safety data sheet
    Product Name
    RXSOL-60-6604-071
    Product Type BISMUTH CARBONATE  
    Revised date  

    Company Details:

    RX MARINE INTERNATIONAL
    105, A wing , BSEL , TECH PARK.
    VASHI ,NEW BOMBAY 400703 INDIA

    Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka

    Phone +91 22 27815541 / 42
    Fax +91 22 2781 1318 :::AOH :0091 9821214367
    Email rxsolchemicals@gmail.com
    Substance / Preparation : BISMUTH CARBONATE
    Substance. Contains no other components or impurities which will influence the
    classification of the product. 
    3.1. Classification of the substance or mixture
    Classification EC 67/548 or EC 1999/45
    Not classified.
    Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
    Not classified.
    3.2. Label elements
    Labelling EC 67/548 or EC 1999/45
    Not classified.
    Labelling Regulation EC 1272/2008 (CLP)
    Not classified.
    3.3. Other hazards
    Other hazards : The substance does not fulfil the criteria to be identified as PBT
    substance or vPvB substance according to Annex XIII of Regulation REACH. 
    4.1. Description of first aid measures
    Inhalation : Assure fresh air breathing. Allow the victim to rest.
    Skin contact : Remove affected clothing and wash all exposed skin area with mild soap
    and water, followed by warm water rinse.
    Eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain,
    blinking or redness persist.
    Ingestion : Obtain emergency medical attention. Rinse mouth. Do NOT induce vomiting.
    4.2 Most important symptoms and effects, both acute and delayed
    Symptoms relating to use : Not expected to present a significant hazard under
    anticipated conditions of normal use.
    4.3. Indication of any immediate medical attention and special treatment needed
    General information : Never give anything by mouth to an unconscious person. If you
    feel unwell, seek medical advice (show the label where possible).
     
     
    5.1. Extinguishing media
    Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
    Unsuitable extinguishing media : Do not use a heavy water stream.
    Surrounding fires : Use water spray or fog for cooling exposed containers.
    5.2. Special hazards arising from the substance or mixture
    Hazardous combustion products : Under fire conditions, hazardous fumes will be
    present.
    5.3. Advice for fire-fighters
    Protection against fire : Do not enter fire area without proper protective equipment,
    including respiratory protection.
    Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
    fire-fighting water to enter environment.
    6.1. Personal precautions, protective equipment and emergency procedures
    For emergency responders : Equip cleanup crew with proper protection.
    Ventilate area.
    For non-emergency personnel : Evacuate unnecessary personnel.
    6.2. Environmental precautions
    Environmental precautions : Prevent entry to sewers and public waters. Notify
    authorities if product enters sewers or public waters.
    6.3. Methods and material for containment and cleaning up
    Clean up methods : On land, sweep or shovel into suitable containers. Minimize
    generation of dust. Store away from other materials.
    6.4. Reference to other sections
    See section 8. Exposure controls/personal protection 
    7.1. Precautions for safe handling
    Handling : Wash hands and other exposed areas with mild soap and water before eat,
    drink or smoke and when leaving work.
    Technical protective measures : Provide good ventilation in process area to prevent
    formation of vapour.
    7.2. Conditions for safe storage, including any incompatibilities
    Storage : Keep only in the original container in a cool, well ventilated place. Keep
    container closed when not in use.
    Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
    7.3. Specific end use(s)
    Specific end use(s) : None.
    8.1. Exposure controls
    Personal protection : Avoid all unnecessary exposure.
    • Respiratory protection : Wear approved mask.
    • Hand protection : Wear protective gloves.
    • Eye protection : Chemical goggles or safety glasses.
    • Others : When using, do not eat, drink or smoke.
    8.2. Control parameters
    Occupational Exposure Limits : No data available
    9.1. Information on basic physical and chemical properties
    Physical state at 20 °C : Solid.
    Odour : Odorless
    Odour threshold : No data available.
    pH value : Not applicable.
    Melting point [°C] : No data available.
    Decomposition point [°C] : N/A
    Critical temperature [°C] : N/A
    Auto-ignition temperature [°C] : N/A
    Flammability (solid, gas) : N/A
    Flash point [°C] : N/A
    Boiling point [°C] : N/A
    Initial boiling point [°C] : N/A
    Final boiling point [°C] : N/A
    Evaporation rate : N/A
    Vapour pressure [20°C] : N/A
    Vapour pressure mm/Hg : N/A
    Vapour density : N/A
    Density [g/cm3] : 6,86
    Relative density, gas (air=1) : N/A
    Relative density, liquid (water=1) : N/A
    Solubility in water [% weight] : Insoluble in water
    Solubility in water : N/A
    Log Pow octanol / water at 20°C : No data available.
    Solubility : N/A
    Viscosity at 40°C [mm2/s] : N/A
    9.2. Other information
    Explosive properties : N/A
    Explosion limits - upper [%] : N/A
    Explosion limits - lower [%] : N/A
    Oxidising properties : No data available.
    10.1. Reactivity
    Reactivity : Not established.
    10.2. Chemical stability
    Chemical stability : Stable under recommended storage conditions.
    10.3. Possibility of hazardous reactions
    Hazardous reactions : Not established.
    10.4. Conditions to avoid
    Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
    10.5. Incompatible materials
    Materials to avoid : Strong acids. Strong bases.
    10.6. Hazardous decomposition products
    Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
    11.1. Information on toxicological effects
    Acute toxicity
    • Inhalation : Based on available data, the classification criteria are not met.
    • Dermal : Based on available data, the classification criteria are not met.
    • Ingestion : Based on available data, the classification criteria are not met.
    Corrosion : Based on available data, the classification criteria are not met.
    Irritation : Based on available data, the classification criteria are not met.
    Sensitization : Based on available data, the classification criteria are not met.
    Mutagenicity : Based on available data, the classification criteria are not met.
    Carcinogenicity : Based on available data, the classification criteria are not met.
    Toxic for reproduction : Based on available data, the classification criteria are not met.
    STOT-single exposure : Based on available data, the classification criteria are not met.
    STOT-repeated exposure : Based on available data, the classification criteria are not
    met.
    Aspiration hazard : Based on available data, the classification criteria are not met.
    12.1. Toxicity
    Toxicity information : Not established.
    12.2. Persistence - degradability
    Persistence - degradability : Biodegradable.
    12.3. Bioaccumulative potential
    Bioaccumulative potential : Not established.
    12.4. Mobility in soil
    Mobility in soil : Not established.
    12.5. Results of PBT and vPvB assessment
    Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
    identified as PBT substance or vPvB substance according to Annex XIII of Regulation
    REACH.
    12.6. Other adverse effects
    Environmental precautions : Avoid release to the environment. 
    13.1. Waste treatment methods
    General : Avoid release to the environment. Dispose in a safe manner in accordance with
    local/national regulations.
    14.1. Land transport (ADR-RID)
    General information : Not regulated.
    14.2. Sea transport (IMDG) [English only]
    General information : Not regulated.
    14.3. Air transport (ICAO-IATA) [English only]
    General information : Not regulated.
    ADR - Packing instructions : P001
    ADR - Limited Quantity : 1 L
    ADR - Tunnel code : D/E : Bulk or tank carriage: Passage forbidden through tunnels of
    category D and
    E. Other carriage: Passage forbidden through tunnels of category E.
    14.2. Sea transport (IMDG) [English only]
    Proper shipping name : ACETIC ACID,
    UN N° : 2789
    IMO-IMDG - Class or division : 8 : Corrosive substance. ( 3 : Flammable liquid. )
    IMO-IMDG - Packing group : II
    IMO- IMDG - Packing instructions : P001
    IMO-IMDG - Limited quantities : 1 L
    IMO-IMDG - Marine pollution : No
    EMS-Nr : F-E S-C
    14.3. Air transport (ICAO-IATA) [English only]
    Proper shipping name : ACETIC ACID
    UN N° : 2789
    IATA - Class or division : 8 : Corrosive substance. ( 3 : Flammable liquid. )
    IATA - Packing group : II
    IATA - Passenger and Cargo Aircraft : ALLOWED
    - Passenger and Cargo - Packing : 851
    instruction
    - Passenger and Cargo - Maximum : 1 L
    Quantity/Packing
    IATA - Cargo only : ALLOWED
    - Cargo only - Packing instruction : 855
    - Cargo only - Maximum Quantity/ : 30 L
    Packing
    IATA - Limited Quantites : 0.5 L
    ERG-Nr : 8F
    15.1. Safety, health and environmental regulations/legislation specific for the
    substance or mixture Safety, health and environmental : Ensure all national/local
    regulations are observed.
    regulations/legislation specific for the substance or mixture
    REACH Restrictions - Annex XVII : The components of this product are not subject to
    restrictions.
    REACH Authorisation - Annex XIV : The components of this product are not subject
    to authorization.
    15.2. Chemical Safety Assessment
    Chemical Safety Assessment : It has not been carried out.
    Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
    vPvB: very persistent and very bioaccumulative
    Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
    PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
    labelling and packaging of substances and mixtures, amending and repealing Directives
    67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
    Further information : None.
    In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
    (CE) Nº 1272/2008 
    DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

    Request the signed SDS as PDF

    Availability

    [BISMUTH CARBONATE] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
    Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
     
    [BISMUTH CARBONATE] is available in small packing as well as in bulk. Buy premium quality [BISMUTH CARBONATE] and other lab chemicals from one of the most trusted brands.

    Our stock points and branches