BROMOFORM SPECIAL
- Part number
- RXSOL-60-6604-102
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Uses. Only small quantities of bromoform are currently produced industrially in the United States.
In the past, it was used as a solvent,
sedative and flame retardant, but now it is mainly used as a laboratory reagent,
for example as an extraction solvent.
Applications
Bromoform is a colorless liquid with a sweet, Chloroform-like odor.
It is used in making organic chemicals, as a solvent for waxes, greases and oils, and as a flotation agent in mineral separation.
Dosage and directions
Bromoform may form when chlorine reacts with
other naturally occurring substances in water, such as decomposing plant material.
Characteristics and notes
Bromoform may form when chlorine reacts with other naturally
occurring substances in water, such as decomposing plant material.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
|
| Product Type | BROMINE AR | |
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
Substance / Preparation : Bromine
CAS No :7726-95-6
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : T+; R26
C; R35
N; R50
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Serious eye damage - Category 1 - Danger (CLP : Eye Dam. 1) H318
Skin corrosion - Category 1A - Danger (CLP : Skin Corr. 1A) H314
Acute toxicity, Inhalation - Category 2 - Danger (CLP : Acute Tox. 2) H330
Environmental hazards : Hazardous to the aquatic environment - Acute hazard -
Category 1 - Warning (CLP : Aquatic Acute 1) H400
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Symbol(s) : T+ : Very toxic
C : Corrosive
N : Dangerous for the environment
R Phrase(s) : R26 : Very toxic by inhalation.
R35 : Causes severe burns.
R50 : Very toxic to aquatic organisms.
S Phrase(s) : S1/2 : Keep locked up and out of reach of children.
S7/9 : Keep container tightly closed and in well-ventilated place.
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
S45 : In case of accident or if you feel unwell, seek medical advice immediately (
show the label when possible).
S61 : Avoid release to the environment. Refer to special instructions/Safety data
sheets.
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
Signal words : Danger
Hazard statements : H330 : Fatal if inhaled.
H314 : Causes severe skin burns and eye damage.
H400 : Very toxic to aquatic life.
Precautionary statements
• General : P102: Keep out of reach of children.
P103: Read label before use.
P101: If medical advice is needed, have product container or label at hand.
• Prevention : P284: Wear respiratory protection.
P280: Wear protective gloves, protective clothing, eye protection, face protection.
P271: Use only outdoors or in a well-ventilated area.
P260: Do not breathe dust, fume, gas, mist, vapours, spray.
P273: Avoid release to the environment.
P264: Wash thoroughly after handling.
• Response : P301+P330+P331: IF SWALLOWED : Rinse mouth. Do NOT induce
vomiting.
P391: Collect spillage.
P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340: IF INHALED : Remove to fresh air and keep at rest in a position
comfortable for breathing.
P303+P361+P353: IF ON SKIN (or hair) : Remove immediately all contaminated
clothing. Rinse skin with water/shower.
P363: Wash contaminated clothing before reuse.
• Storage : P403+P233: Store in well-ventilated place. Keep container tightly closed.
P405: Store locked up.
• Disposal considerations : P501: Dispose of this material and its container to hazardous
or special waste collection point, in accordance with local, regional, national and/or
international regulation.
3.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH.
4.1. Description of first aid measures
Inhalation : Specific treatment is urgent (see on this label). Immediately call a POISON
CENTER or doctor. Remove to fresh air and keep at rest in a position comfortable
for breathing.
Skin contact : Wash with plenty of soap and water. Remove/Take off immediately all
contaminated clothing. Immediately call a POISON CENTER or doctor.
Eye contact : Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a POISON CENTER or doctor. Rinse cautiously with water for several
minutes.
Ingestion : Do NOT induce vomiting. Rinse mouth. Immediately call a POISON
CENTER or doctor.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Fatal if inhaled.
Causes severe skin burns and eye damage.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be
present.Thermal decomposition generates : Corrosive vapours.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters. Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
Clean up methods : Soak up spills with inert solids, such as clay or diatomaceous earth
as soon as possible. Store away from other materials. Collect spillage.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection
7.1. Precautions for safe handling
Handling : Wash thoroughly after handling. Avoid contact during pregnancy or while
nursing.Use only outdoors or in a well-ventilated area. Do not breathe dust, fume, gas,
mist, vapours, spray.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep
container tightly closed.
Storage regulation : Comply with applicable regulations.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.
8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear respiratory protection.
• Hand protection : Wear protective gloves.
• Skin protection : Wear suitable protective clothing.
• Eye protection : Chemical goggles or face shield.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Liquid.
Odour threshold : No data available.
pH value : No data available.
Melting point [°C] : 7.2 °C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : 580C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapour pressure [20°C] : 233 hPa at 20 °C
Vapour pressure mm/Hg : N/A
Vapour density : 5,52
Density [g/cm3] : 3,119
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : 4 g/l00 ml water @ 2
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
Thermal decomposition generates : Corrosive vapours.
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Fatal if inhaled.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Causes severe skin burns and eye damage.
Causes serious eye damage.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not
met.
Aspiration hazard : Based on available data, the classification criteria are not met.
12.1. Toxicity Toxicity
information : Very toxic to aquatic life.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.
13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations. Dispose of this material and its container to hazardous or
special waste collection point, in accordance with local, regional, national and/or
international regulation.
Special precautions : Hazardous waste due to toxicity.
14.1. Land transport (ADR-RID)
Proper shipping name : BROMINE or BROMINE SOLUTION
UN N° : 1744
H.I. nr : 886
ADR - Class : 8
Labelling - Transport : 8 : Corrosive substance. 6.1 : Toxic substances.
{ LÉ
ADR - Classification code : CT1
ADR - Group : I
ADR - Packing instructions : P804
ADR - Limited Quantity : 0
ADR - Tunnel code : C/D : Tank carriage: Passage forbidden through tunnels category
C, D and E.
Other carriage: Passage forbidden through tunnels of category D and E.
14.2. Sea transport (IMDG) [English only]
Proper shipping name : BROMINE or BROMINE SOLUTION
UN N° : 1744
IMO-IMDG - Class or division : 8 : Corrosive substance. ( 6.1 : Toxic substances. )
IMO-IMDG - Packing group : I
IMO- IMDG - Packing instructions : P601
IMO-IMDG - Limited quantities : None
IMO-IMDG - Marine pollution : Yes
EMS-Nr : F-A S-B
14.3. Air transport (ICAO-IATA) [English only]
Proper shipping name : BROMINE or BROMINE SOLUTION
UN N° : 1744
IATA - Class or division : 8 : Corrosive substance. ( 6.1 : Toxic substances. )
IATA - Packing group : I
IATA - Passenger and Cargo Aircraft : NOT ALLOWED
IATA - Cargo only : NOT ALLOWED
ERG-Nr : 8P
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[BROMOFORM SPECIAL] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[BROMOFORM SPECIAL] is available in small packing as well as in bulk. Buy premium quality [BROMOFORM SPECIAL] and other lab chemicals from one of the most trusted brands.
