RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

House / HOTEL & CATERING

Bakery Antifungal

Preservative for Breads, Cakes and in other Baked Items
Part number
RXSOL-15-1257-111
Brand
RXSOL
RXSOL

Overview

Bakery Antifungal is an excellent food additives and anti fungal agent. It is preservative for baked goods, for breads, cakes, pizza crust and cheese against fungus.

Bakery Antifungal is a product specially made in our R&D Department and has worked out to be an efficient and a popular product for many bakers. Bakery Fungal is an antifungal / antimould agent which is among the top notch products in the relation to bakery products.

Technical specifications

SYNONYMS

Bakery Antifungal

DEFINITION

Preservative for cakes, cheese, pizza crusts and other baked items

Uses

Bakery Antifungal is used as a food preservative and antifungal agent

C.A.S. number

137-40-6

Chemical formula

C3H5NaO2

Structural formula

CH3CH2COO-Na+

Formula weight

96.06

Assay

Not less than 99.0% on the dried basis

DESCRIPTION

White Powder, hygroscopic crystals with not more than a faint characteristic odour

FUNCTIONAL USES

Preservative, antimould/antifungal and antirope agent

Solubility                    

Freely soluble in water, soluble in ethanol                                                                 

pH                              

7.5 - 10.5 (1 in 10 soln)                                                                                               

Applications

It is normally added along with the dry ingredients like Flour & Baking powder.

Recommended Dosage is as follows:

(A) BREADS

(B) CAKES

(C) PIZZA SHELLS / CRUSTS

(D) CHEESE

Dosage and directions

Recommended Dosage is as follows: 

(A) BREADS: Around 0.3% - 0.4% on Flour Weight 

(B) CAKES:

a. Cheese Cake 0.3% on Flour Weight 

b. Chocolate Cake 0.4% on Flour Weight 

c. Fruit Cake 0.4% - 0.5% on Flour Weight

d. Pound Cake 0.5% on Flour Weight 

e. Sponge Cake 0.5% on Flour Weight 

(C) PIZZA SHELLS / CRUSTS: Around 0.4% on Flour Weight. 

(D) CHEESE: Dosage is around 0.4% – 0.5% on Finished product.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name : RXSOL-15-1257-111
Product Type : Bakery Antifungal

Material Identity                                                        
Product Name: BAKERY ANTIFUNGAL                     
General or Generic ID: FOOD PRESERVATIVE FOR CAKES, CHEESE AND OTHER BAKED PRODUCTS
Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : rxsolchemicals@gmail.com
Chemical Name CAS # % BY WEIGHT
Propriotory blend ... 100%
     
Eye                                          

Can cause redness and an irritating type of pain   

 Skin   

Use Protective gloves while using this product. In case of contact, rinse skin with plenty of water or shower. 

Swallowing  

Do not eat, drink, or smoke during work. Rinse mouth. Give one or two glasses of water to drink.  

  Inhalation

Cough. Sore throat.

Symptoms of Exposure  

Slightly irritant.. 

 
Developmental Information 

There are no data available for assessing risk to the fetus from    
maternal exposure to this material. 

Cancer Information 

Based on the available information, this material cannot be         
classified with regard to carcinogenicity.  This material is not    
listed as a carcinogen by the International Agency for Research on  
Cancer, the National Toxicology Program, or the Occupational        
Safety and Health Administration. 

Other Health Effects 

Causes slight irritant on exposure to skin or entry in the eye.

. 

Primary Route(s) of Entry    Inhalation, Skin contact, Eye contact.
 
Eyes                                                  

. Rinse with plenty of water (remove contact lenses if easily possible). 

Skin  

Rinse skin with plenty of water or shower.  

Swallowing 

Rinse mouth. Give one or two glasses of water to drink.

Inhalation

Fresh air, rest.

Note to Physicians   Preexisting disorders of the following organs (or organ systems) may be aggravated by exposure to this material:  skin, lung (for example, asthma-like conditions), immune system. 
Suitable  
Carbon dioxide (CO
2
)
Water spray
Foam
Dry powder
Use an extinguishing agent suitable for the surroun
ding fire.

Carbon Dioxide

Water Spray

Foam

Dry Powder

Use an extinguishing agent suitable for the surrounding fire.

Special Exposure Haazards

No Specific Hazard

Special Protective  

Wear appropriate protective equipment and self contained breathing apparatus witha fullface piece operated in positive pressure mode.

Special Risks

Sodium Propionate can burn if heated to decomposition. Similar to dust of most combustible compounds, under certain conditions the dust of the substance may explode when ignited by a spark, flame. When evaluating the explosion hazard potential for the material, consider particle shape and size, dust concentration, presence of impurities, oxygen concentratioin, humidity and extent of containment.

Fire and Explosion Hazards  

 No special fire hazards are known to be associated with this        
 product.   

Extinguishing Media 

Use an extinguishing media appropriate for surrounding fire.. 

 Risks associated  with thermal decomposition products

products

Under fire conditions or above decomposition temperature, emits carbon monooxide, carbon dioxide and sodium oxides. Sodium Propionate can burn if heated to decomposition.

   

 

Personal precautions                          

Immediately contact emergency personnel. Keep unnecessary personnel away. Use suitable protective equipment. 

Environmental precautions  Avoid dispersal of spilled material, runoff and contact with soil, waterways, drains and sewers.                                                          

Cleaning  methods

                                                                                                                                                                                                              

 If emergency personnel are unavailable, vacuum or carefully scoop up spilt material and place in an appropriate container for disposal. Avoid creating dusty conditions and prevent wind dispersal. Dispose of as special waste according to local and national regulations. Thoroughly clean the floor and objects contaminated by observing environmental regulations. Refer to section 7 for handling directives..                                                          
 


Handling Directives                                                                                                                                                                                                                                                                                                                                                    


Avoid dust formation during handling. DO NOT INGEST without prior transformation. Avoid all possible sources of ignition (spark or flame). Dry sweeping is not recommended. Do not perform any welding, cutting, drilling or other work that is susceptible to cause heat on or near empty container or transfer equipment until all combustible solids have been removed. Avoid dust accumulation. Pre-wet the material or use a vacuum equipped with high efficiency filter(s). The use of compressed air to clean equipment, clothing, etc. is not recommended. Provide ventilation and/or adequate ventilation in the working area. Refer to section 6 for environmental precautions. 
Requirements for warehouses and containers   Store in original containers
Storage temperature                                                                                                         < 30°C, not critical. Store away from direct sunlight 
 
             
 
Eye Protection                                                   

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. Reference should be made to European Standard EN 166.

Skin Protection   

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product

Respiratory Protections  

A respirator is not needed under normal or intended conditions of product use. Use a properly fitted, particulate filter respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Engineering Controls   

Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below level of overexposure (from  known, suspected or apparent adverse effects). 

Exposure Guidelines   

o specific exposure limit has been established for this material. For reference, OSHA and ACGIH have established the following limits which are generally recognized for inert or nuisance dust. Particulates Not Otherwise Regulated (PNOR) 15mg/cu. meter  

 
   
Boiling Point     No data
Vapor Pressure      0 kPa (0 mm Hg) (at 20°C)  
Specific Vapor Density       No data   
Specific Gravity       No data
Density     

0.32 – 0.45 g/mL

Percent Volatiles     No data
Evaporation Rate     No data
Appearance     Low dust white to off-white powder, deliquescent in moist air
State     Solid
Physical Form     Powder 
Color     Low dust white to off-white powder, deliquescent in moist air
Odor      Faint Odor
pH       13.8.0 to 10.5 20oC (10% w/v)
Solubility in Water     100 g/100 ml water 25°C or 127 g/100 ml water 80°C  

Reactivity   No Reactivity under normal conditions of use  
Stability   The product is stable but hygroscopic
 
Conditions to avoid   Avoid all sources of spark                                                                                              
 
Materials to avoid   Reactive with strong acids and oxidising agents and also reacts with metals

No data 

No data

Waste residues information    The generation of waste should be avoided or minimized wherever possible. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewer. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation, and any national and local authority requirements.
DOT Information    Not applicable
 DOT Description:     ...
Container/Mode:      55 GAL DRUM/TRUCK PACKAGE 
NOS Component:      Not applicable    
RQ (Reportable Quantity)   Not applicable 
Product Quantity (lbs)    Component    

 

NA                   

 

Text of R and S phrase codes used in this safety data sheet:- R34: Causes burns; R36: Irritating to eyes; R37: Irritating to respiratory system; R41: Risk of serious damage to eyes. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable..

Request the signed SDS as PDF

Availability

Bakery Antifungal supplier in Kolkata, Mumbai, Gandhidham, Chennai, Visakhapatnam, Fujairah, Dubai, Abudhabi, Ajman UAE Middle East, Muscat Oman

We have one of the largest network for the distribution and supplies of Bakery Antifungal.

Our stock points and branches