RXSOL CHEMO PHARMA International Navi Mumbai, India

Products

7,061 products across 71 categories for marine, industrial, water treatment and laboratory use.

Browse all products Product catalogue

Cooling Water Chemical

Biocide Close Loop

Closed Loop Biocides, chilled water prevent and eradicate unwanted biological fouling from the system.
Part number
RXSOL-40-4008-027
Brand
RXSOL
Biocide Close Loop

Overview

RXSOL-40-4008-027 Biocides is chemical  that prevent and eradicate unwanted biological fouling from the system. Biocides are of various nature such as oxidizing, non-oxidizing, cationic, anionic etc. Biological Fouling or Biofouling is the undesirable accumulation of micro-organisms, algae and diatoms, plants, and animals on surface, pipelines and heat-exchangers of cooling systems. Bio-fouling can be of aerobic (that require oxygen) or anerobic (that don't require oxygen) organisms. In general the former is found in Cooling Towers and the later in closed circuit systems.

Biocide Close Loop is a powerful microbiocide which will control a wide range of troublesome microbes in closed water systems.

Technical specifications

Specifications of Biocide Close Loop
Chemical TypeOrganic/Inorganic Chemical Compound (TCF)
FormLiquid
Specific GravityRanges from 1.0 – 1.2 depending upon product
SolubilityCompletely Soluble in Water

Applications

Engine Jacket, Chiller Water Circuit, Glycol Brine System, Hot Water Circuit, Engine Coolant, Process chilling and heating etc.
 

Dosage and directions

Dosage:
The amount of Closed Loop Biocide required to inhibit or remove bio fouling depends on the type of system, application, re-circulating fluid property and plant operating conditions. The specific dosage rates will be specified by the CSL technical representative.
 

Characteristics and notes

Advantage / Benefits:

  •     Prevention of Bio-fouling of system.
  •     Avoid plugging of nozzles.
  •     Avoids MIC (Microbiologically Induced Corrosion).
  •     Prevent Water Borne Diseases.
  •     Improve heat loss because living organisms cause rise in temperature of water.
  •     Does not add chloride to the system.

Safety and SDS

Read the safety data sheet before handling. Wear suitable gloves and eye protection.

View safety data sheet
Product Name Biocide Close Loop
Product Type RXSOL-40-4008-027

Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email rxsolchemicals@gmail.com
Name CAS# % by Weight

Magnesium Nitrate

10377-60-3

1.0 - 5.0

5-Chloro-2-Methyl-4-Isothiazolin-3-one

26172-55-4

1.0 - 5.0

2-Methyl-4-Isothiazolin-3-one

2682-20-4

0.1 - 1.0

Eyes Corrosive. Will cause eye burns and permanent tissue damage
INHALATION Elevated temperatures or mechanical action may form vapors, mists or fumes which may be irritating to the eyes,
nose, throat and lungs. Harmful by inhalation.
Skin Corrosive; causes permanent skin damage. May cause sensitization by skin contact. Skin irritation effects can be
delayed for hours. Harmful if absorbed through skin
INGESTION Not a likely route of exposure. Corrosive; causes chemical burns to the mouth, throat and stomach. Harmful if
swallowed..

Eye Contact

IF IN EYES: Hold eyes open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing. Call a poison control center or doctor for treatment advice

Skin Contact

Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes. Call a
poison control center or doctor for treatment advice.

Inhalation

Move person to fresh air. If person is not breathing, call 911 or ambulances, then give artificial
respiration, preferably mouth-to-mouth, if possible. Call a poison control center or doctor for treatment advice

note to physician

Probable mucosal damage may contraindicate the use of gastric lavage. Based on the individual reactions of the patient, the physician's judgement should be used to control symptoms and clinical condition.

EXTINGUISHING MEDIA :


Not expected to burn. Use extinguishing media appropriate for surrounding fire.


FIRE AND EXPLOSION HAZARD :
 

May evolve oxides of carbon (COx) under fire conditions. May evolve HCl under fire conditions. May evolve oxides of
nitrogen (NOx) and sulfur (SOx) under fire conditions.


SPECIAL PROTECTIVE EQUIPMENT FOR FIRE FIGHTING :


In case of fire, wear a full face positive-pressure self contained breathing apparatus and protective suit. 

PERSONAL PRECAUTIONS :
 

Restrict access to area as appropriate until clean-up operations are complete. Ensure clean-up is conducted by
trained personnel only. Ventilate spill area if possible. Do not touch spilled material. Stop or reduce any leaks if it is
safe to do so. Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal
Protection). Notify appropriate government, occupational health and safety and environmental authorities.


METHODS FOR CLEANING UP :


SMALL SPILLS: Soak up spill with absorbent material. Place residues in a suitable, covered, properly labeled
container. Wash affected area. LARGE SPILLS: Soak up with inert absorbent material. Transfer contaminated
material to suitable containers for disposal. Contaminated surfaces should be swabbed with deactivation solution, let
stand for 30 minutes and rinse thoroughly with clean water. DO NOT add deactivation solution to the waste container
to deactivate the absorbed material.


DEACTIVATION SOLUTION -

prepare fresh a solution of 5% Sodium bicarbonate and 5% Sodium hypochlorite in
water. Use a ratio of 10 volumes decontamination solution per estimated volume of residual spill. Wash site of spillage
thoroughly with water. Contact an approved waste hauler for disposal of contaminated recovered material. Dispose of
material in compliance with regulations indicated in Section 13 (Disposal Considerations).


ENVIRONMENTAL PRECAUTIONS :
 

This pesticide is toxic to fish and wildlife. Do not discharge effluent containing this product into lakes, streams, ponds,
estuaries, oceans or other waters, unless in accordance with the requirements of a National Pollutant Discharge
Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge. Do not
discharge effluent containing this product to sewer systems without previously notifying the local sewage treatment
plant authority. For guidance contact your State Water Board or Regional Office of the EPA. Do not contaminate
water by cleaning of equipment or disposal of waste. Apply this pesticide only as specified on this label. Do not
contaminate surface water. 

HANDLING :


Do not get in eyes, on skin, on clothing. Do not take internally. Use with adequate ventilation. Avoid generating
aerosols and mists. Keep the containers closed when not in use. Have emergency equipment (for fires, spills, leaks,
etc.) readily available. Ensure all containers are labeled.


STORAGE CONDITIONS :


Store the containers tightly closed. Store separately from oxidizers. Store in suitable labeled containers. 

ENGINEERING MEASURES :


General ventilation is recommended. Use local exhaust ventilation if necessary to control airborne mist and vapor.
 

RESPIRATORY PROTECTION :


If significant mists, vapors or aerosols are generated an approved respirator is recommended. A suitable filter material
depends on the amount and type of chemicals being handled. Consider the use of filter type: Multi-contaminant
cartridge. with a Particulate pre-filter. In event of emergency or planned entry into unknown concentrations a positive
pressure, full-facepiece SCBA should be used. If respiratory protection is required, institute a complete respiratory
protection program including selection, fit testing, training, maintenance and inspection.


HAND PROTECTION :
 

When handling this product, the use of chemical gloves is recommended. The choice of work glove depends on work
conditions and what chemicals are handled. Please contact the PPE manufacturer for advice on what type of glove
material may be suitable. Gloves should be replaced immediately if signs of degradation are observed.


SKIN PROTECTION :
 

Wear chemical resistant apron, chemical splash goggles, impervious gloves and boots. A full slicker suit is
recommended if gross exposure is possible.


EYE PROTECTION :
 

Wear a face shield with chemical splash goggles. 

Appearance Liquid Light green / Light yellow
odor Mild
 Specific gravity 1.026
Density 8.5 lb/gal
solubility in water  complete
pH 3.0 - 5.0
freezing point 25 °F / -4 °C
boiling point 100 °C

Stability

Stable under normal conditions

Conditions to Avoid

Freezing temperatures.

Materials to avoid Contact with strong oxidizers (e.g. chlorine, peroxides, chromates, nitric acid, perchlorate, concentrated oxygen,
permanganate) may generate heat, fires, explosions and/or toxic vapors
Eyes Corrosive. Will cause eye burns and permanent tissue damage
INHALATION Elevated temperatures or mechanical action may form vapors, mists or fumes which may be irritating to the eyes,
nose, throat and lungs. Harmful by inhalation.
Skin Corrosive; causes permanent skin damage. May cause sensitization by skin contact. Skin irritation effects can be
delayed for hours. Harmful if absorbed through skin
INGESTION Not a likely route of exposure. Corrosive; causes chemical burns to the mouth, throat and stomach. Harmful if
swallowed..

NA 

 Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal
law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or
Environmental Control Agency, or the Hazardous Waste Representative at the nearest EPA Regional Office for
guidance. 

 NA 

 NA 

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Request the signed SDS as PDF

Availability

Biocide for Cooling Water manufacturer and supplier in Mumbai, Kandla, Kolkata, Dubai, Sharjah, Ajman, Abudhabi Fujairah, Visakhapatnam, Andhrapradesh, Gandhidham, Haldia, Paradip, Muscat Barka Sohar Oman, Kenya Nairobi Africa, Sudan, Yemen

Our stock points and branches