Buffer Solution pH 4
- Part number
- RXSOL-60-6206-030
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
Buffer mixture can be made from a mixture of an acid and its conjugate base. We also have ready stock of Colour code pH Buffers 1.68, 4.01, 7.00, 6.86, 9.18, 10.01, 12.45
Available with ready stock for accurate calibration with traceability certificate.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6206-030 |
| Product Type | Buffer Solution, pH 4 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Methyl Red Sodium Salt | 845-10-3 | < | W/V |
None Established |
| Potassium Hydrogen Phthalate | 877-24-7 | 1.02% | W/V |
TXDS: orl-rat LD•: 3200 mg/Kg |
| Thymol Crystal | 89-83-8 | 0.01% | W/V |
TXDS: orl-rat LD•: 640 mg/Kg |
| Water, Deionized ASTM Type II | 7732-18-5 | Balance | V/V |
None Established |
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep
Emergency Overview:Caution! May Cause Irritation to Skin and Eyes.
Inhalation:No Adverse Health Effects Expected from Inhalation.
Ingestion:Large Doses may Cause Stomach Upset.
Skin:Not Expected to be a Health Hazard from Skin Exposure. May Cause Mild Irritation and Redness.
Eye Contact:Not Expected to be a Health Hazard. May Cause Mild Irritation, Possible Reddening.
Chronic Exposure:No Information Found.
Aggravated by Exposure:No Information Found.
May be harmful if swallowed. May cause irritation. Avoid breathing vapors, or dusts. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep container closed.
|
SKIN: |
Wash exposed area with soap and water. If irritation persists, seek medical attention. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person |
|
Fire Extinguisher Type: |
Any means suitable for extinguishing surrounding fire |
| Fire / Explosion Hazards: | None |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material. Flush excess down drain. Ventilate area of Leak or Spill. Keep Unnecessary and Unprotected People away from the area of Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Contain and Recover Liquid when Possible. Collect Liquid in an Appropriate Container or Absorb with an Inert Material (e.g., Vermiculite, Dry Sand, Earth). Do Not use Combustible Materials, such as Saw Dust. US Regulations (CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.
Store in a cool dry place. This Material is not considered hazardous. Handle using safe laboratory practices.
|
Respiratory Protection |
None required |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | Gloves to prevent skin exposure as rubber or vinyl |
| EYE PROTECTION | Safety Glasses w/Side Shields |
| Other Protective Equipment | Use safe laboratory handling procedures. |
| BOILING POINT | ~100° C |
| VAPOR PRESSURE | Information not available |
| MELTING POINT | ~0° C |
| VAPOR DENSITY | Information not available |
| EVAPORATION RATE | Information not available |
| Appearance /Odors | Clear red solution/Slight benzoic acid odor |
| Flash Point | not flammable |
| Specific Gravity | ~ 1 |
| Percent Volatile by |
>99% |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air |
Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
High temperature, air |
|
MATERIALS TO AVOID |
Strong acids and bases |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
Not known to occur |
|
HAZARDOUS POLYMERIZATION |
Will Not Occur |
| Conditions to Avoid | None known |
Carcinogenic References: NTP Carcinogen - Known: No, IARC Category- None
No Information Found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and
approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Classification: Not Regulated
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Potassium Acid Phthalate (877-24-7)
TSCA Yes
EC Yes
Japan No
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Potassium Acid Phthalate (877-24-7)
Korea Yes
DSL Yes
NDSL NO
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Potassium Acid Phthalate (877-24-7)
RQ NO
TPQ NO
List NO
Chemical Catg No
Federal, State & International Regulations –
Part 2:Ingredient
Potassium Acid Phthalate (877-24-7)
CERCLA NO
261.33 No
8(d) No
Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:NO Mixture/Liquid)
SARA 311/312: Acute: Yes
Chronic: NO
Fire: No
Pressure: No
Reactivity: No
Australian Hazchem Code: None
Poison Schedule: None allocated
Overexposure symptoms. Acute: Essentially non-hazardous. Possible irritation of eyes/stomach. Chronic: None known. Conditions aggravated/Target organs: none known.
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 0 | |
| 7/28/2010 | 0.1 updated msds to 16 section from 10 section msds. STN |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Buffer pH 4 solution manufacturer and supplier in Mumbai, Kandla, Kolkata, Gandhidham, Sohar, Barka, Ajman, Abudhabi, Dubai, Fujairah, VISAKHAPATNAM, chennai, CANADA