COPPER FOIL 0.1MM APPROX 99
- Part number
- RXSOL-60-6604-358
- Category
- Lab Chemical
- Brand
- RXSOL
Overview
The Cu ETP Plate used in electrical conductors has approximately 99% copper and is identified as electrolytic tough pitch
copper
Our Thin Copper Foils are extensively used in various industries for varied applications.
Copper Foil Sheets offered by us are available in various
Applications
Copper is a metal that occurs naturally throughout the environment, in rocks, soil, water, and air. Copper is an essential element in plants and animals (including humans), which means it is necessary for us to live. Therefore, plants and animals must absorb some copper from eating, drinking, and breathing.Copper is used to make many different kinds of products like wire, plumbing pipes, and sheet metal
Characteristics and notes
A special, 80 % zinc and 20 % aluminium by weight, brazing paste was utilized for joining the foils together. The test of the single lap joints show that none of the specimens failed at the bonded area and the failure was always due to fracture of the parent metal.
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name |
|
||
| Product Type | COPPER FOIL 99% (0.1mm Approx) | ||
| Revised date |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
2.1. Substances /Preparation : COPPER FOIL 99%
CAS No. : 7440- 50- 8
Substance name Contents CAS No
Copper >95 7440-50-8
Substance.
Contains no other components or impurities which will influence the classification of the
product.
3.1. Classification of the substance or mixture
CLP Classification - Regulation (EC) No 1272/2008
Health hazards
Based on available data, the classification criteria are not met
Environmental hazards
Based on available data, the classification criteria are not met
Physical hazards
Based on available data, the classification criteria are not met
3.2. Label elements
Hazard Statements
Precautionary Statements
3.3. Other hazards
No information available
4.1. Description of first aid measures
Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least
15 minutes. Get medical attention.
Skin Contact Wash off immediately with plenty of water for at least 15 minutes. Get
medical attention immediately if symptoms occur.
Ingestion Do not induce vomiting. Obtain medical attention.
Inhalation Move to fresh air. Get medical attention immediately if symptoms occur. If
not breathing, give artificial respiration.
Self-Protection of the First Aider No special precautions required.
4.2. Most important symptoms and effects, both acute and delayed
No information available.
4.3. Indication of any immediate medical attention and special treatment needed
Notes to Physician Treat symptomatically.
5.1. Extinguishing media
Suitable Extinguishing Media
Substance is nonflammable; use agent most appropriate to extinguish surrounding fire.
Extinguishing media which must not be used for safety reasons
No information available.
5.2. Special hazards arising from the substance or mixture
Thermal decomposition can lead to release of irritating gases and vapors. Keep product
and empty container away from heat and sources of ignition.
Hazardous Combustion Products
Copper oxides.
5.3. Advice for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH
(approved or equivalent) and full protective gear.
6.1. Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation. Use personal protective equipment. Avoid dust formation.
6.2. Environmental precautions
Do not flush into surface water or sanitary sewer system. Should not be released into the
environment. Do not allow material to contaminate ground water system.
6.3. Methods and material for containment and cleaning up
Sweep up or vacuum up spillage and collect in suitable container for disposal. Avoid dust
formation.
6.4. Reference to other sections
Refer to protective measures listed in Sections 8 and 13.
7.1. Precautions for safe handling
Wear personal protective equipment. Ensure adequate ventilation. Avoid contact with
skin, eyes and clothing. Avoid ingestion and inhalation. Avoid dust formation.
• Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice. Keep away from
food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this
product. Remove and wash contaminated clothing before re-use. Wash hands before
breaks and at the end of workday.
7.2. Conditions for safe storage, including any incompatibilities
Keep containers tightly closed in a dry, cool and well-ventilated place. Store under an
inert atmosphere.
7.3. Specific end use(s)
Use in laboratories
8.1. Control parameters
• Exposure limits
List source(s): UK - EH40/2005 Containing the workplace exposure limits (WELs) for
use with the Control of Substances
Hazardous to Health Regulations (COSHH) 2002 (as amended).
IRE - 2010 Code of Practice for the Safety, Health and Welfare at Work (Chemical
Agents) Regulations 2001.
Published by the Health and Safety Authority.
• Component The United Kingdom European Union Ireland
Copper STEL: 0.6 mg/m3 15 min
STEL: 2 mg/m3 15 min
TWA: 1 mg/m3 8 hr
TWA: 0.2 mg/m3 8 hr
TWA: 0.2 mg/m3 8 hr. Cu
fume
TWA: 1 mg/m3 8 hr.Cu
dusts and mists
STEL: 0.6 mg/m3 15 min
STEL: 2 mg/m3 15 min
• Biological limit values
This product, as supplied, does not contain any hazardous materials with biological limits
established by the region specific regulatory bodies
• Monitoring methods
BS EN 14042:2003 Title Identifier: Workplace atmospheres. Guide for the application
and use of procedures for the assessment of exposure to chemical and biological agents.
MDHS14/3 General methods for sampling and gravimetric analysis of respirable and
inhalable dust MDHS 99 Metals in air by ICP-AES
MDHS 91 Metals and metalloids in workplace air by X-ray fluorescence spectrometry
Derived No Effect Level (DNEL) No information available
Predicted No Effect Concentration
(PNEC)
No information available.
8.2. Exposure controls
Engineering Measures
None under normal use conditions.
Personal protective equipment
Eye Protection Safety glasses with side-shields (European standard - EN 166)
Hand Protection Protective gloves
Skin and body protection Wear appropriate protective gloves and clothing to prevent
skin exposure Inspect gloves before use. Please observe the instructions regarding
permeability and breakthrough time which are provided by the supplier of the gloves.
(Refer to manufacturer/supplier for information)
Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational
conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the
specific local conditions under which the product is used, such as the danger of cuts,
abrasion. Remove gloves with care avoiding skin contamination.
Respiratory Protection No protective equipment is needed under normal use conditions.
Large scale/emergency use Use a NIOSH/MSHA or European Standard EN 136
approved respirator if exposure limits are exceeded or if irritation or other symptoms are
experienced
Recommended Filter type: Particle filter
Small scale/Laboratory use Maintain adequate ventilation
Environmental exposure controls Prevent product from entering drains. Do not allow
material to contaminate ground water
system. Local authorities should be advised if significant spillages cannot be contained
9.1. Information on basic physical and chemical properties
9.2. Other information
Glove material Breakthrough time Glove thickness EU standard Glove comments
Odor Threshold No data available
pH No information available
Melting Point/Range 1083 °C / 1981.4 °F
Softening Point No data available
Boiling Point/Range 2595 °C / 4703 °F@ 760
mmHg Flash Point No information available
Evaporation Rate Not applicable Solid
Flammability (solid,gas) No information available
Explosion Limits No data available
Vapor Pressure No data available
Vapor Density Not applicable Solid
Specific Gravity / Density No data available
Bulk Density No data available
Water Solubility Insoluble
Solubility in other solvents No information available
Partition Coefficient (n-octanol/water)
Autoignition Temperature No data available
Decomposition Temperature No data available
Viscosity Not applicable Solid
Explosive Properties No information available
Oxidizing Properties No information available
Molecular Formula Cu
Molecular Weight 63.54
10.1. Reactivity
None known, based on information available
10.2. Chemical stability
Air sensitive.
10.3. Possibility of hazardous reactions
Hazardous Polymerization Hazardous polymerization does not occur.
Hazardous Reactions None under normal processing.
10.4. Conditions to avoid
Incompatible products. Excess heat. Avoid dust formation. Exposure to air.
10.5. Incompatible materials
Strong oxidizing agents.
10.6. Hazardous decomposition products
Copper oxides.
11.1. Information on toxicological effects
Product Information No acute toxicity information is available for this product
acute toxicity;
• Inhalation No data available
• skin corrosion/irritation; No data available
• serious eye damage/irritation; No data available
respiratory or skin sensitization;
• Respiratory No data available
• Skin No data available
• germ cell mutagenicity; No data available
• carcinogenicity; No data available
Possible cancer hazard. May cause cancer based on animal data The table below indicates
whether each agency has listed any ingredient as a carcinogen
• reproductive toxicity; No data available
• STOT-single exposure; No data available
• STOT-repeated exposure; No data available
Target Organs None known.
• aspiration hazard; Not applicable
• Other Adverse Effects The toxicological properties have not been fully investigated.
• Symptoms / effects,both acute and delayed No information available
12.1. Toxicity
• Ecotoxicity effects Contains a substance which is:. Very toxic to aquatic organisms.
The product contains following substances which are hazardous for the environment.
May cause long-term adverse effects in the environment. Do not allow material to
contaminate ground water system.
12.2. Persistence and degradability The product includes heavy metals. Prevent release
into the environment. Special pretreatment required
• Persistence Insoluble in water, May persist.
• Degradability Not relevant for inorganic substances.
• Degradation in sewage treatment plant
Contains substances known to be hazardous to the environment or not degradable in
waste water treatment plants.
12.3. Bioaccumulative potential May have some potential to bioaccumulate; Product
has a high potential to bioconcentrate
12.4. Mobility in soil Spillage unlikely to penetrate soil Is not likely mobile in the
environment due its low water solubility.
12.5. Results of PBT and vPvB assessment
No data available for assessment.
12.6. Other adverse effects
• Endocrine Disruptor Information This product does not contain any known or
suspected endocrine disruptors
• Persistent Organic Pollutant This product does not contain any known or suspected
substance
• Ozone Depletion Potential This product does not contain any known or suspected
substance
13.1. Waste treatment methods
Waste from Residues / Unused
• Products
Chemical waste generators must determine whether a discarded chemical is classified as
a hazardous waste. Consult local, regional, and national hazardous waste regulations to
ensure complete and accurate classification.
• Contaminated Packaging Empty remaining contents. Dispose of in accordance with
local regulations. Do not re-use empty containers.
• European Waste Catalogue (EWC) According to the European Waste Catalogue,
Waste Codes are not product specific, but application specific
• Other Information Do not dispose of waste into sewer.
14.1. Land transport (ADR-RID)
General information : Not regulated.
14.2. Sea transport (IMDG) [English only]
General information : Not regulated.
14.3. Air transport (ICAO-IATA) [English only]
General information : Not regulated.
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
Further information : None.
In accordance with REACH Regulation (CE) Nº 1907/2006 and with CLP Regulation
(CE) Nº 1272/2008
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
[PRODUCT NAME] manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
[PRODUCT NAME] is available in small packing as well as in bulk. Buy premium quality [PRODUCT NAME] and other lab chemicals from one of the most trusted brands.
COPPER FOIL 0.1MM APPROX 99 manufacturers, suppliers, exporters in Mumbai, Gandhidham, Kolkata, Varanasi, Visakhapatnam, Chennai, Fujairah, Dubai, Canada BC, Barka, Sohar, Muscat, Oman.
Lab chemicals manufacturers, suppliers, exporters in India, UAE Middle East, Barka, Sohar, Muscat, Oman, Canada.
COPPER FOIL 0.1MM APPROX 99 is available in small packing as well as in bulk. Buy premium quality COPPER FOIL 0.1MM APPROX 99 and other lab chemicals from one of the most trusted brands.
