Overview
Calcium Buffer Solution is the mixture Laboratory chemicals
Safety and SDS
Read the safety data sheet before handling. Wear suitable gloves and eye protection.
View safety data sheet
| Product Name | RXSOL-60-6196-001 |
| Product Type | Calcium Buffer Solution |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| rxsolchemicals@gmail.com |
| SARA 313 Component | CAS Number | Percent Comp. |
Dimension |
Exposure Limits |
| Sodium Hydroxide | CAS# 1310-73-2 | 15 - 17% | W/W |
OSHA PEL 2 mg/mƒ ACGIH 2mg/mƒ |
| Water, Deionized ASTM Type II | CAS# 7732- 18-5 | 73- 85% | W/W |
None Established |
Causes severe irritation and burns. Harmful if swallowed. Avoid breathing vapor or dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash thoroughly after handling. Keep
Emergency Overview:Poison! Danger! Corrosive. May be fatal if swallowed. Harmful if inhaled.
Causes burns to any area of contact. Reacts with water, acids and other materials.
Inhalation:Severe irritant. Effects from inhalation of mist vary from mild irritation to serious
damage of the upper respiratory tract, depending on severity of exposure. Symptoms may include sneezing, sore throat or runny nose. Severe pneumonitis may occur
Ingestion:Corrosive! Symptoms may include severe burns of mouth, throat, and stomach. Severe Scarring of tissue and death may result. Symptoms may include bleeding, vomiting, diarrhea, fall in blood pressure. Damage may appear days after exposure.
Skin:Corrosive! Contact with skin can cause irritation or severe burns and scarring with greater
exposures.
Eye Contact:Corrosive! Causes irritation of eyes, and with greater exposures it can cause burns that
Chronic Exposure:May result in permanent impairment of vision, even blindness.
Aggravated by Exposure:Prolonged contact with dilute solutions or dust has a destructive effect
upon tissue.
Persons with pre-existing skin disorders or eye disease may be more susceptable to the
Effects ot this substance.
Causes severe irritation and burns. Harmful if swallowed. Avoid breathing vapor or dust. Use with adequate ventilation. Avoid contact with eyes, skin, and clothes. Wash
|
SKIN: |
In case of contact, immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Thoroughly clean clothing and shoes before reuse. |
| EYES: | Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen |
| INGESTION: | Give several glasses of milk or water. Vomiting may occur spontaneously, but DO NOT INDUCE! Never give anything by mouth to an unconscious person. |
|
Fire Extinguisher Type: |
Water spray, Carbon dioxide, dry chemical, powder, foam. |
| Fire / Explosion Hazards: | None |
| Fire Fighting Procedure: | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and clothing. |
Absorb spill with inert material, then place in a chemical waste container. Neutralize with a weak acid.
Ventilate area of Leak or Spill. Keep Unnecessary and Unprotected People away from the area
of Spill. Wear Appropriate Personal Protective Equipment as Specified in Section 8. Contain and Recover Liquid when Possible. Do not Flush Caustic Residues to the Sewer. Residues from Spills can be Diluted with Water, Neutralized with Dilute Acid such as Acetic, Hydrochloric or Sulfuric. Absorb Neutralized Caustic Residue on Clay, Vermiculite, or other Inert Substance
and Package in a Suitable Container for Disposal. US Regulations (CERCLA) Require Reporting Spills and Releases to Soil, Water and Air in Excess of Reportable Quantities.
Keep in tightly closed container. Store in a cool, dry, well-ventilated place away from incompatible materials. Wash thoroughly after handling. Store above 60 deg F (16°C) to prevent freezing. Containers of this product may be hazardous when
|
Respiratory Protection |
NIOSH/MSHA-approved respirator empty. thoroughly after handling. Keep container closed |
| Ventilation | Local |
| OTHER | Mechanical |
| Protective Gloves | NIOSH Approved Gloves |
| EYE PROTECTION |
Splash Goggles or full face shield. |
| Other Protective Equipment |
Wear appropriate clothing to prevent skin exposure |
| BOILING POINT | Information not available |
| VAPOR PRESSURE | Information not available |
| MELTING POINT | Information not available |
| VAPOR DENSITY | Information not available |
| EVAPORATION RATE | Information not available |
| Appearance /Odors | Clear odorless liquid |
| Flash Point | Not applicable |
| Specific Gravity | ~1.22 |
| Percent Volatile by | 83-85% |
| Evaporation Standard | |
| Auto Ignition Temp |
Not applicable |
| Lower Flamm. Limit in Air | Not applicable |
| Upper Flamm. Limit in Air | Not applicable |
| Solubility in Water | Soluble |
|
STABILITY |
Stable |
|
CONDITIONS TO AVOID |
Avoid contact with incompatible materials. |
|
MATERIALS TO AVOID |
Acids, flammable liquids, organic |
|
HAZARDOUS DECOMPOSITION PRODUCTS |
sodium oxide, Reation w/ metals may |
|
HAZARDOUS POLYMERIZATION |
Will Not Occur |
| Conditions to Avoid | None known |
NTP Carcinogen - Known: No, IARC Category- None
No Information Found.
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and
approved waste facility. Although not a listed RCRA hazardous waste, this material may exhibit
one or more characteristics of a hazardous waste and require appropriate analysis to determine specific disposal requirements. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
DOT Classification: UN1824, Sodium Hydroxide Solution, 8, PG II
DOT Regulations may change from time to time. Please consult the most recent D.O.T. regulations.
Chemical Inventory Status –
Part 1:Ingrdient
Sodium Hydroxide (1310-73-2)
TSCA Yes
EC Yes
Japan yes
Australia Yes
Chemical Inventory Status –
Part 2:Ingredient
Sodium Hydroxide (1310-73-2)
Korea Yes
DSL Yes
NDSL No
Phil. Yes
Federal, State & International Regulations –
Part 1: Ingredient.
Sodium Hydroxide (1310-73-2)
RQ No
TPQ NO
List No
Chemical Catg No
Federal, State &
International Regulations –
Part 2:Ingredient
Hydrogen Chloride (7647-01-0)
Water (7732-18-5)
CERCLA 1000
261.33 No
8(d) No
Chemical Weapons Convention:No
TSCA 12 (b):No
CDTA:NO Mixture/Liquid)
SARA 311/312: Acute: Yes
Chronic: Yes
Fire: NO
Pressure: No
Reactivity: YES
Australian Hazchem Code: None
Poison Schedule: None allocated
Conditions aggravated/target organs: Corrosive! Persons with pre- existing skin and eye disorders will be more susceptible. Acute: Skin and eye irritation or burns. Chronic: Dermatitis, eye damage.
Flammability
Health Reactivity
|
Revisions |
NFPA |
| 7/30/2010 |
0.1 updated msds to 16 section from 10 section msds. STN |
| 0 |
The information herein is believed to be accurate and is offered in good faith for the user's consideration and investigation. No warranty either expressed or implied is made for the completeness or accuracy of the information whether originating from the above mentioned company or not. Users of this material should satisfy themselves by independent investigation of current scientific and medical knowledge that the material
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
Availability
Calcium Buffer Solution manufacturer and supplier in INDIA - Middle East, Mumbai, Kolkata, Chennai, Visakhapatnam, Paradip, Kandla Gandhidham, Fujairah, Dubai, Abudhabi, Ajman, Sharjah, Muscat Oman